Re: [Scsirastools-developers] New user (Fujitsu Sun drives)

[Daniel S. <ma...@my...>]

Cress, Andrew R napsal(a):
> That's good news.
> 
> The orange led is the correct color (disk fault LED is orange), the
> green means disk activity.
> 
Yes I agree with you.


> I think that I can avoid the extra characters by making sure that the
> inquiry buffer is fully initialized to the buffer size, instead of the
> inquiry length (which came back wrong from those drives).  
> 
> Turning on the LED in both enclosures is a bug, and I need to handle
> that.
> There is apparently a problem matching the disk to the proper
> Proc/Backplane.
Thanks.

		Dan



> 
> Andy 
> 
> -----Original Message-----
> From: Daniel Smolik [mailto:ma...@my...] 
> Sent: Thursday, March 08, 2007 6:55 AM
> To: Cress, Andrew R
> Cc: scs...@li...
> Subject: Re: [Scsirastools-developers] New user (Fujitsu Sun drives)
> 
> Cress, Andrew R napsal(a):
> 
>>Evan,
>>
>>That looks much better.
>>The only anomaly in it, is that it tried to see if two proc's match
> 
> serial number, and it shouldn't try.
> 
>>This is unusual that two of the same procs are in the same system,
> 
> which is why I never had this problem before.
> 
>>Anyway, this latest sgsafte.c should work fine on your system now.
>>
>>If it still has some problems, send me the sgsafte -x log output
> 
> again.
> 
>>If it works ok, let me know and I'll make sure these fixes are working
> 
> in the other tools as well.
> 
> 
>   sgsafte utility v1.21 for SCSI SAF-TE testing
> Num Name      bus:ch:id:lun Type Vendor   Device_Model     FRev Serial# 
>   Status
> 0 /dev/sg0 /dev/sda 1:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944498794?` rea 
>                     dy
> 1 /dev/sg1 /dev/sdb 1:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944499100?` rea 
>                     dy
> 2 /dev/sg2 /dev/sdc 1:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944499308?` re 
>                    ady
> 3 /dev/sg3          1:0:15:0 Proc SYMBIOS  D1000            2    `'} 
>    ready
> 4 /dev/sg4 /dev/sdd 2:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944498792 ready 
> 
> 5 /dev/sg5 /dev/sde 2:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944499149 ready 
> 
> 6 /dev/sg6 /dev/sdf 2:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944499314 read 
>                    y
> 7 /dev/sg7          2:0:15:0 Proc SYMBIOS  D1000            2    `'} 
>    ready
> 8 /dev/sg8 /dev/sdg 4:0:6:0 CDRM TOSHIBA  XM6201TASUN32XCD 1103 12/12/97
> 
> ready
> 9 /dev/sg9 /dev/sdh 5:0:0:0 Disk SEAGATE  ST39103LCSUN9.0G 034A 
> 9949862528 ready
> 
> 
>     sgsafte utility v1.21 for SCSI SAF-TE testing
> Num Name      bus:ch:id:lun Type Vendor   Device_Model     FRev Serial# 
>   Status
> 0 /dev/sg0 /dev/sda 1:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944498794 ready
> 1 /dev/sg1 /dev/sdb 1:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944499100 ready
> 2 /dev/sg2 /dev/sdc 1:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944499308 ready
> 3 /dev/sg3          1:0:15:0 Proc SYMBIOS  D1000            2    `'} 
>    ready
> 4 /dev/sg4 /dev/sdd 2:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944498792 ready
> 5 /dev/sg5 /dev/sde 2:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944499149 ready
> 6 /dev/sg6 /dev/sdf 2:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
> 9944499314 ready
> 7 /dev/sg7          2:0:15:0 Proc SYMBIOS  D1000            2    `'} 
>    ready
> 8 /dev/sg8 /dev/sdg 4:0:6:0 CDRM TOSHIBA  XM6201TASUN32XCD 1103 12/12/97
> 
> ready
> 9 /dev/sg9 /dev/sdh 5:0:0:0 Disk SEAGATE  ST39103LCSUN9.0G 034A 
> 9949862528 ready
> monitoring 10 scsi devices ...
> 
> 
> Thanks Andy , great work now displays all correctly. Only small garbage 
> when sometime run (look at first output). I now test sgsafte -d 0 -f and
> 
> it works !!! Turn on orange led instead of green led on enclosure. But 
> this turn on led on second half of enclosure too (on second processor).
> 
> 			Dan
> 
> 
> 
> 
> 
> 
> 
> 


-- 
Mydatex s r.o.
http://www.mydatex.cz
email: sm...@my...
mob: 604200362
tel: 226210085