Re: [Scsirastools-developers] New user (Fujitsu Sun drives)

[Cress, A. R <and...@in...>]

That's good news.

The orange led is the correct color (disk fault LED is orange), the
green means disk activity.

I think that I can avoid the extra characters by making sure that the
inquiry buffer is fully initialized to the buffer size, instead of the
inquiry length (which came back wrong from those drives). =20

Turning on the LED in both enclosures is a bug, and I need to handle
that.
There is apparently a problem matching the disk to the proper
Proc/Backplane.

Andy=20

-----Original Message-----
From: Daniel Smolik [mailto:ma...@my...]=20
Sent: Thursday, March 08, 2007 6:55 AM
To: Cress, Andrew R
Cc: scs...@li...
Subject: Re: [Scsirastools-developers] New user (Fujitsu Sun drives)

Cress, Andrew R napsal(a):
> Evan,
>=20
> That looks much better.
> The only anomaly in it, is that it tried to see if two proc's match
serial number, and it shouldn't try.
> This is unusual that two of the same procs are in the same system,
which is why I never had this problem before.
> Anyway, this latest sgsafte.c should work fine on your system now.
>=20
> If it still has some problems, send me the sgsafte -x log output
again.
> If it works ok, let me know and I'll make sure these fixes are working
in the other tools as well.
>=20

  sgsafte utility v1.21 for SCSI SAF-TE testing
Num Name      bus:ch:id:lun Type Vendor   Device_Model     FRev Serial#=20
  Status
0 /dev/sg0 /dev/sda 1:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944498794?` rea=20
                    dy
1 /dev/sg1 /dev/sdb 1:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944499100?` rea=20
                    dy
2 /dev/sg2 /dev/sdc 1:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944499308?` re=20
                   ady
3 /dev/sg3          1:0:15:0 Proc SYMBIOS  D1000            2    `'}=20
   ready
4 /dev/sg4 /dev/sdd 2:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944498792 ready=20

5 /dev/sg5 /dev/sde 2:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944499149 ready=20

6 /dev/sg6 /dev/sdf 2:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944499314 read=20
                   y
7 /dev/sg7          2:0:15:0 Proc SYMBIOS  D1000            2    `'}=20
   ready
8 /dev/sg8 /dev/sdg 4:0:6:0 CDRM TOSHIBA  XM6201TASUN32XCD 1103 12/12/97

ready
9 /dev/sg9 /dev/sdh 5:0:0:0 Disk SEAGATE  ST39103LCSUN9.0G 034A=20
9949862528 ready


    sgsafte utility v1.21 for SCSI SAF-TE testing
Num Name      bus:ch:id:lun Type Vendor   Device_Model     FRev Serial#=20
  Status
0 /dev/sg0 /dev/sda 1:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944498794 ready
1 /dev/sg1 /dev/sdb 1:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944499100 ready
2 /dev/sg2 /dev/sdc 1:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944499308 ready
3 /dev/sg3          1:0:15:0 Proc SYMBIOS  D1000            2    `'}=20
   ready
4 /dev/sg4 /dev/sdd 2:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944498792 ready
5 /dev/sg5 /dev/sde 2:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944499149 ready
6 /dev/sg6 /dev/sdf 2:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111=20
9944499314 ready
7 /dev/sg7          2:0:15:0 Proc SYMBIOS  D1000            2    `'}=20
   ready
8 /dev/sg8 /dev/sdg 4:0:6:0 CDRM TOSHIBA  XM6201TASUN32XCD 1103 12/12/97

ready
9 /dev/sg9 /dev/sdh 5:0:0:0 Disk SEAGATE  ST39103LCSUN9.0G 034A=20
9949862528 ready
monitoring 10 scsi devices ...


Thanks Andy , great work now displays all correctly. Only small garbage=20
when sometime run (look at first output). I now test sgsafte -d 0 -f and

it works !!! Turn on orange led instead of green led on enclosure. But=20
this turn on led on second half of enclosure too (on second processor).

			Dan








--=20
Mydatex s r.o.
http://www.mydatex.cz
email: sm...@my...
mob: 604200362
tel: 226210085