Re: [Scsirastools-developers] New user (Fujitsu Sun drives)

[Daniel S. <ma...@my...>]

Cress, Andrew R napsal(a):
> Evan,
> 
> That looks much better.
> The only anomaly in it, is that it tried to see if two proc's match serial number, and it shouldn't try.
> This is unusual that two of the same procs are in the same system, which is why I never had this problem before.
> Anyway, this latest sgsafte.c should work fine on your system now.
> 
> If it still has some problems, send me the sgsafte -x log output again.
> If it works ok, let me know and I'll make sure these fixes are working in the other tools as well.
> 

  sgsafte utility v1.21 for SCSI SAF-TE testing
Num Name      bus:ch:id:lun Type Vendor   Device_Model     FRev Serial# 
  Status
0 /dev/sg0 /dev/sda 1:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944498794?` rea 
                    dy
1 /dev/sg1 /dev/sdb 1:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944499100?` rea 
                    dy
2 /dev/sg2 /dev/sdc 1:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944499308?` re 
                   ady
3 /dev/sg3          1:0:15:0 Proc SYMBIOS  D1000            2    `'} 
   ready
4 /dev/sg4 /dev/sdd 2:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944498792 ready 

5 /dev/sg5 /dev/sde 2:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944499149 ready 

6 /dev/sg6 /dev/sdf 2:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944499314 read 
                   y
7 /dev/sg7          2:0:15:0 Proc SYMBIOS  D1000            2    `'} 
   ready
8 /dev/sg8 /dev/sdg 4:0:6:0 CDRM TOSHIBA  XM6201TASUN32XCD 1103 12/12/97 
ready
9 /dev/sg9 /dev/sdh 5:0:0:0 Disk SEAGATE  ST39103LCSUN9.0G 034A 
9949862528 ready


    sgsafte utility v1.21 for SCSI SAF-TE testing
Num Name      bus:ch:id:lun Type Vendor   Device_Model     FRev Serial# 
  Status
0 /dev/sg0 /dev/sda 1:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944498794 ready
1 /dev/sg1 /dev/sdb 1:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944499100 ready
2 /dev/sg2 /dev/sdc 1:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944499308 ready
3 /dev/sg3          1:0:15:0 Proc SYMBIOS  D1000            2    `'} 
   ready
4 /dev/sg4 /dev/sdd 2:0:8:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944498792 ready
5 /dev/sg5 /dev/sde 2:0:9:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944499149 ready
6 /dev/sg6 /dev/sdf 2:0:10:0 Disk FUJITSU  MAG3091L SUN9.0G 1111 
9944499314 ready
7 /dev/sg7          2:0:15:0 Proc SYMBIOS  D1000            2    `'} 
   ready
8 /dev/sg8 /dev/sdg 4:0:6:0 CDRM TOSHIBA  XM6201TASUN32XCD 1103 12/12/97 
ready
9 /dev/sg9 /dev/sdh 5:0:0:0 Disk SEAGATE  ST39103LCSUN9.0G 034A 
9949862528 ready
monitoring 10 scsi devices ...


Thanks Andy , great work now displays all correctly. Only small garbage 
when sometime run (look at first output). I now test sgsafte -d 0 -f and 
it works !!! Turn on orange led instead of green led on enclosure. But 
this turn on led on second half of enclosure too (on second processor).

			Dan








-- 
Mydatex s r.o.
http://www.mydatex.cz
email: sm...@my...
mob: 604200362
tel: 226210085