Re: [Scsirastools-developers] New scsirastools-1.5.7 release
Brought to you by:
arcress
Menu
▾
▴
Re: [Scsirastools-developers] New scsirastools-1.5.7 release
|
From: Daniel S. <ma...@my...> - 2008-07-23 20:47:16
|
Cress, Andrew R napsal(a): > > See http://scsirastools.sf.net for rpms, etc. > This version fixes a few minor bugs, esp. when running on read-only > filesystems, and > one bug in sgmode when interpreting bogus mode pages returned by some > raid devices. > > Andy > > 1.5.7 = released 07/23/08, updated 07/23/08 > src/sgdiag.c - fixed error with -f option to do unattended format > src/sgcommon.c - added showlog(), cleanup of fdlog > src/sgcommon.h - added showlog(), dump_buf() > src/sgsub.c - make dumpbuf() static > src/sgmode.c - fixed segfault if bogus mode pages returned, > replace fprintf(fdlog) with showlog(), dump_buf(). > src/sg*.c - use showlog() throughout for safety > files/st373455.mdf - new, for ST373455 disks > doc/sgmode.8 - refer to UserGuide 3.1 for mdf files > doc/UserGuide - set mdf info 1c 0a 88 00 to make sure SMART+MRIE=off > scsirastools-1.5.7 contains: > sgdefects.c ver 1.12 > sgdiag.c ver 1.19 > sgdiskmon.c ver 1.6 > sgdskfl.c ver 1.15 > sgmode.c ver 1.17 > sgraidmon.c ver 1.35 > sgsafte.c ver 1.26 > > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > > > ------------------------------------------------------------------------ > > _______________________________________________ > Scsirastools-developers mailing list > Scs...@li... > https://lists.sourceforge.net/lists/listinfo/scsirastools-developers Hi Andy,dev[5] iret=0, ret=0, len=64 8:0:0:0 /dev/sg5 /dev/sde ATA WDC WD7500AYPS-002.0 [6] jret=-1 maj=0, min=0 [6] bdev ret=0 sdname = /dev/sdf inquiry ret=65, errno=2 dev[6] iret=0, ret=0, len=64 10:0:0:0 /dev/sg6 /dev/sdf ATA WDC WD7500AYPS-002.0 [7] jret=-1 maj=0, min=0 [7] bdev ret=0 sdname = /dev/sdg inquiry ret=65, errno=2 dev[7] iret=0, ret=0, len=64 12:0:0:0 /dev/sg7 /dev/sdg ATA WDC WD7500AYPS-002.0 scan ret = 0 device 6 is duplicate device 7 is duplicate device 7 is duplicate device 6 is duplicate nchgs=0 nrdy=6 lastnrdy=64 ndev=8 Num Name bus:ch:id:lun Type Vendor Device_Model FRev Serial# Status 0 /dev/sg0 /dev/sda 4:0:0:0 Disk SEAGATE ST39103LCSUN9.0G 034A 9949862528 online 1 /dev/sg1 /dev/sdb 4:0:1:0 Disk FUJITSU MAG3091L SUN9.0G 1111 9944499149 online 2 /dev/sg2 /dev/sdc 4:0:2:0 Disk FUJITSU MAG3091L SUN9.0G 1111 9944499100 online 3 /dev/sg3 /dev/sdd 4:0:3:0 Disk FUJITSU MAG3091L SUN9.0G 1111 9944498794 online 4 /dev/sg4 /dev/sr0 5:0:6:0 CDRM TOSHIBA XM6201TASUN32XCD 1103 12/12/97 ready 5 /dev/sg5 /dev/sde 8:0:0:0 Emul ATA WDC WD7500AYPS-0 02.0 ready 6 /dev/sg6 /dev/sdf 10:0:0:0 Disk failed 7 /dev/sg7 /dev/sdg 12:0:0:0 Disk failed monitoring 6 scsi devices ... dev 4 stat=3, saving dev 5 stat=3, saving on sdg6 and sdg7 reports failed but this disk are the same as sdg5. I don't understand why. Dan I have compiled new version nad run it on my modified Sparc box with mixture of Scsi and SATA disk an get this: -- Mydatex s r.o. http://www.mydatex.cz email: sm...@my... mob: 604200362 tel: 226210085 |
