From: Kacper W. <ka...@on...> - 2004-06-27 13:09:10
|
Hi all, I'm a zeroinstall user, and I have a two-head Xinerama setup. Recently, =20 ROX-Filer has been insisting on staying on my left screen; one can move =20 it onto the right screen, but as soon as one enters another directory, =20 the filer window will reposition itself onto the left screen. This =20 happens regardless of whether the left screen is xinerama screen 1 or =20 0, so I suspect it has something to do with rox requesting to be near =20 0,0 (top left). A friend of mine, with a similar setup, has the same problem, -unless-=20 he turns on "merged framebuffer mode" and pseudo-xinerama extentions =20 *off* in his proprietary nvidia X drivers. We have spent many hours hunting down the cause of the problem, as it =20 is very annoying, and we have found that rox 2.1.1 and below are not =20 affected with the problem. Rather, rox 2.1.2 is where the problem was =20 introduced. I've had a quick look at the changelog, and I do not see =20 anything in there that could cause the problems, unless it's this: 08-Apr-2004 ~~~~~~~~~~~ Added Xinerama support (Tony Houghton). Although I was under the impression that this "Xinerama support" was =20 only the added feature of confining the panel(s) to one xinerama =20 screen. Indeed, turning this option on or off does not fix the problem =20 we're having currently. I would appreciate it greatly if you: 1) could tell me how to get 0install ROX-Session to use v2.1.1 of the =20 filer instead of the latest one? 2) had any pointers for how to permanently fix this problem, ie by =20 pointing at specific lines of code. 3) knew whether there are any plans to add support for different panels =20 confined to different monitors, ie creating essentialy Z =3D (4 x number-= =20 of-screens) panel edges. TIA -Kacper |