From: James M. <js...@jm...> - 2006-04-18 20:56:24
|
I'm finally getting around to setting up a music studio on my Linux box. I'm excited to find Rosegarden and look forward to using it! I can't get any sound from it, though, e.g. when I load bogus-surf-jam and play it. I get sound from other audio apps (Hydrogen, XMMS), but not Rosegarden. I think I loaded the soundfont OK with "sfxload 8mbgmsfx.sf2" (with a downloaded 8mbgmsfx.sf2). Here's my machine: Distro: SuSE 9.3 Kernel: 2.6.11.4-21.11-default CPU: AMD Athlon 64 3000+ Sound card: SoundBlaster Live! Value (model CT4832) RAM: 512 Mb (will probably upgrade when Rosegarden gets going) Rosegarden: 1.2.3 Sometimes when I start Rosegarden I get a warning of "no soundcard available or sound support not configured yet...." I think that's when jackd is already loaded, but I'm not sure. "ps -ef" shows the following: UID PID PPID C STIME TTY TIME CMD jsm 10075 1 0 Apr17 ? 00:00:37 /usr/bin/jackd -d alsa -d hw -r 44100 -p 2048 -n 2 If it's helpful, the output of "rosegardensequencer" is below. I'm a Unix programmer but new to Linux audio. If there's a better forum for this, or a FAQ I missed, pointers are most appreciated. Thanks a ton! James ............................................................................ James Marshall ja...@jm... Berkeley, CA @}-'-,-- "Teach people what you know." ............................................................................ ====== output of rosegardensequencer follows ======================== Rosegarden 4-1.2.3 - AlsaDriver - alsa-lib version 1.0.9 JackDriver::initialiseAudio - JACK sample rate = 44100Hz, buffer size = 2048 JackDriver::initialiseAudio - creating disk thread JackDriver::initialiseAudio - found 2 JACK physical outputs JackDriver::initialiseAudio - connecting from "rosegarden:master out L" to "alsa_pcm:playback_1" JackDriver::initialiseAudio - connecting from "rosegarden:master out R" to "alsa_pcm:playback_2" JackDriver::initialiseAudio - found 2 JACK physical inputs JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_1" to "rosegarden:record in 1 L" JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_2" to "rosegarden:record in 1 R" JackDriver::initialiseAudio - initialised JACK audio subsystem ALSA Client information: 62,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype 2, cap 99] 64,0 - (EMU10K1 MPU-401 (UART), EMU10K1 MPU-401 (UART)) (DUPLEX) [ctype 2, ptype 2, cap 127] 65,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 65,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 65,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 65,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] CREATED OUTPUT PORT 3:out 1 - MIDI soundcard synth for device 0 Connecting my port 3 to 65:0 on initialisation done Creating device 0 in Play mode for connection 65:0 Emu10k1 Port 0 (write) Default device name for this device is MIDI soundcard synth CREATED OUTPUT PORT 4:out 2 - MIDI soundcard synth 2 for device 1 Connecting my port 4 to 65:1 on initialisation done Creating device 1 in Play mode for connection 65:1 Emu10k1 Port 1 (write) Default device name for this device is MIDI soundcard synth 2 CREATED OUTPUT PORT 5:out 3 - MIDI soundcard synth 3 for device 2 Connecting my port 5 to 65:2 on initialisation done Creating device 2 in Play mode for connection 65:2 Emu10k1 Port 2 (write) Default device name for this device is MIDI soundcard synth 3 CREATED OUTPUT PORT 6:out 4 - MIDI soundcard synth 4 for device 3 Connecting my port 6 to 65:3 on initialisation done Creating device 3 in Play mode for connection 65:3 Emu10k1 Port 3 (write) Default device name for this device is MIDI soundcard synth 4 CREATED OUTPUT PORT 7:out 5 - MIDI external device for device 4 Connecting my port 7 to 64:0 on initialisation done Creating device 4 in Play mode for connection 64:0 EMU10K1 MPU-401 (UART) (duplex) Default device name for this device is MIDI external device Creating device 5 in Record mode for connection 64:0 EMU10K1 MPU-401 (UART) (duplex) Default device name for this device is MIDI hardware input device CREATED OUTPUT PORT 8:out 6 - MIDI output system device for device 6 done Creating device 6 in Play mode for connection 62:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI output system device Creating device 7 in Record mode for connection 62:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI input system device AlsaDriver::setCurrentTimer((auto)) Current timer set to "system timer" with timer checks AlsaDriver::initialiseMidi - initialised MIDI subsystem ====== end of initial rosegardensequencer output ====================== |