[reprap-commits] SF.net SVN: reprap:[4127] trunk/software/host/lib/reprap.properties.dist

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Revision: 4127
          http://reprap.svn.sourceforge.net/reprap/?rev=4127&view=rev
Author:   adrian-bowyer
Date:     2011-05-09 08:46:20 +0000 (Mon, 09 May 2011)

Log Message:
-----------
Latest properties file.

Modified Paths:
--------------
    trunk/software/host/lib/reprap.properties.dist

Modified: trunk/software/host/lib/reprap.properties.dist
===================================================================

--- trunk/software/host/lib/reprap.properties.dist	2011-05-09 04:37:10 UTC (rev 4126)
+++ trunk/software/host/lib/reprap.properties.dist	2011-05-09 08:46:20 UTC (rev 4127)
@@ -1,205 +1,205 @@
+#Fri Apr 29 10:43:50 BST 2011
 #RepRap machine parameters. See http://objects.reprap.org/wiki/Java_Software_Preferences_File
-#Fri Apr 29 10:43:50 BST 2011
-Extruder0_ExtrusionLastFoundationWidth(mm)=2
-Extruder2_InfillSpeed(0..1)=1
-Extruder1_FastXYFeedrate(mm/minute)=2500.0
-Extruder2_CoolingPeriod(s)=-1
-Extruder2_ExtrudeRatio(0..)=1
-Extruder0_OffsetX(mm)=0
-Extruder1_ColourB(0..1)=0.3
-Extruder3_OutlineSpeed(0..1)=0.9
-Extruder1_OffsetY(mm)=0
-Extruder2_MaterialType(name)=PLA-infill
-Extruder2_OffsetZ(mm)=0
-Extruder2_Reverse(ms)=1200
-Extruder3_SlowXYFeedrate(mm/minute)=1500.0
+BaudRate=57600
+BedTemperature(C)=65
+CommsDebug=false
 Debug=false
-Extruder0_ValveDelayForLayer(ms)=200
-Extruder3_CoolingPeriod(s)=0.1
-Extruder2_ArcCompensationFactor(0..)=8
-Extruder1_ExtrusionPWM(0..1)=-1
-Extruder0_ExtrusionBroadWidth(mm)=-1
-SlowZFeedrate(mm/minute)=50.0
-MaximumFeedrateX(mm/minute)=2500
-WorkingY(mm)=300
-Extruder3_ExtrusionOverRun(mm)=0
-Extruder0_InfillSpeed(0..1)=1
-Extruder2_MaxAcceleration(mm/minute/minute)=1200000.0
-Extruder3_ValvePulseTime(ms)=500
+DumpX(mm)=143
+DumpY(mm)=5
+Extruder0_Address=0
 Extruder0_ArcCompensationFactor(0..)=8
-Extruder3_ValveDelayForLayer(ms)=200
-DumpX(mm)=143
-Extruder3_SupportMaterialType(name)=null
-Extruder1_ExtrusionLastFoundationWidth(mm)=1
-Extruder0_ExtrusionSpeed(mm/minute)=2500
-Extruder1_Address=0
-Extruder2_FastEFeedrate(mm/minute)=18000.0
-Extruder2_ExtrusionSize(mm)=0.5
-Extruder3_MiddleStart=true
-Extruder3_MaterialType(name)=PCB-pen
-Extruder3_ExtrusionHeight(mm)=0.25
-Extruder2_InFillMaterialType(name)=PLA-infill
-Extruder2_ColourG(0..1)=0.8
-Extruder2_ExtrusionDelayForLayer(ms)=500
+Extruder0_ArcShortSides(0..)=1
+Extruder0_ColourB(0..1)=0.6
+Extruder0_ColourG(0..1)=0.3
+Extruder0_ColourR(0..1)=0.3
+Extruder0_CoolingPeriod(s)=-1
+Extruder0_EvenHatchDirection(degrees)=45
 Extruder0_ExtrudeRatio(0..)=1
-Extruder2_ExtrusionOverRun(mm)=0
-Extruder2_OddHatchDirection(degrees)=-45
-Extruder1_SlowXYFeedrate(mm/minute)=1500.0
-Extruder2_ExtrusionPWM(0..1)=-1
-Extruder1_MaxAcceleration(mm/minute/minute)=1200000.0
-Extruder1_ExtrusionBroadWidth(mm)=2.5
-Extruder2_ExtrusionHeight(mm)=0.25
-Extruder1_ValveDelayForPolygon(ms)=200
-Extruder2_ExtrusionInfillWidth(mm)=1.5
-Extruder3_ExtrusionDelayForPolygon(ms)=500
+Extruder0_ExtrusionBroadWidth(mm)=-1
 Extruder0_ExtrusionDelayForLayer(ms)=500
-Extruder1_SupportMaterialType(name)=null
-Extruder0_OddHatchDirection(degrees)=-45
-Port(name)=/dev/ttyUSB0 
-Extruder2_ExtrusionDelayForPolygon(ms)=50
-BaudRate=57600
-Extruder3_NumberOfShells(0..N)=1
-Extruder1_OffsetX(mm)=0
-Extruder0_ColourR(0..1)=0.3
-Extruder2_OffsetY(mm)=0
-Extruder1_ExtrusionDelayForPolygon(ms)=50
-Extruder2_ColourB(0..1)=0.3
-Extruder3_OffsetZ(mm)=0
-Extruder1_ExtrusionHeight(mm)=0.25
-Extruder3_ColourR(0..1)=0.3
-Extruder0_MiddleStart=true
-Extruder3_Reverse(ms)=400
-Extruder2_InfillOverlap(mm)=0.2
-Extruder0_ArcShortSides(0..)=1
-Extruder0_ExtrusionSize(mm)=0.5
-Extruder2_FastXYFeedrate(mm/minute)=2500.0
-Shield=false
 Extruder0_ExtrusionDelayForPolygon(ms)=50
-Extruder1_ExtrusionOverRun(mm)=3
-FoundationLayers=0
-Extruder2_ExtrusionLastFoundationWidth(mm)=2
-Extruder3_InfillSpeed(0..1)=0.9
-Extruder0_Reverse(ms)=1200
-WorkingX(mm)=300
+Extruder0_ExtrusionFoundationWidth(mm)=2
 Extruder0_ExtrusionHeight(mm)=0.25
+Extruder0_ExtrusionInfillWidth(mm)=0.5
+Extruder0_ExtrusionLastFoundationWidth(mm)=2
+Extruder0_ExtrusionOverRun(mm)=-1
+Extruder0_ExtrusionPWM(0..1)=-1
+Extruder0_ExtrusionSize(mm)=0.5
+Extruder0_ExtrusionSpeed(mm/minute)=2500
+Extruder0_ExtrusionTemp(C)=205
+Extruder0_FastEFeedrate(mm/minute)=18000.0
+Extruder0_FastXYFeedrate(mm/minute)=2500.0
+Extruder0_InFillMaterialType(name)=PLA-infill
+Extruder0_InfillOverlap(mm)=0.2
+Extruder0_InfillSpeed(0..1)=1
+Extruder0_Lift(mm)=0
+Extruder0_MaterialType(name)=PLA
 Extruder0_MaxAcceleration(mm/minute/minute)=1200000.0
-Extruder3_ExtrusionSpeed(mm/minute)=2500
-Extruder1_ValveDelayForLayer(ms)=200
-Extruder2_NumberOfShells(0..N)=1
-Extruder3_ExtrusionPWM(0..1)=-1
-Extruder2_ExtrusionBroadWidth(mm)=6
+Extruder0_MiddleStart=true
+Extruder0_NumberOfShells(0..N)=2
+Extruder0_OddHatchDirection(degrees)=-45
+Extruder0_OffsetX(mm)=0
+Extruder0_OffsetY(mm)=0
 Extruder0_OffsetZ(mm)=0
-Extruder0_InfillOverlap(mm)=0.2
-Extruder0_ExtrusionTemp(C)=205
-Extruder0_ExtrusionOverRun(mm)=-1
-Extruder3_ExtrusionLastFoundationWidth(mm)=2
-Extruder3_ExtrudeRatio(0..)=1
-MaximumFeedrateY(mm/minute)=2500
 Extruder0_OutlineSpeed(0..1)=0.9
-Extruder1_InfillSpeed(0..1)=1
-NumberOfExtruders=4
-Extruder0_ColourG(0..1)=0.3
-Extruder2_Address=0
-MaxXYAcceleration(mm/mininute/minute)=1200000
-Extruder2_ValveDelayForPolygon(ms)=200
-Extruder0_FastEFeedrate(mm/minute)=18000.0
-Extruder3_ColourG(0..1)=0.3
-Extruder3_FastEFeedrate(mm/minute)=8000.0
-Extruder0_InFillMaterialType(name)=PLA-infill
-Extruder1_ExtrusionTemp(C)=205
-Extruder1_NumberOfShells(0..N)=0
-Extruder3_ArcCompensationFactor(0..)=8
-Extruder0_FastXYFeedrate(mm/minute)=2500.0
-Extruder3_InFillMaterialType(name)=null
-FiveD=true
-BedTemperature(C)=65
-FinishY(mm)=190
+Extruder0_Purge(ms)=30000
+Extruder0_Reverse(ms)=1200
+Extruder0_SlowXYFeedrate(mm/minute)=1500.0
+Extruder0_SupportMaterialType(name)=null
+Extruder0_ValveDelayForLayer(ms)=200
+Extruder0_ValveDelayForPolygon(ms)=200
+Extruder0_ValveOverRun(mm)=-1
 Extruder0_ValvePulseTime(ms)=-500
+Extruder1_Address=0
 Extruder1_ArcCompensationFactor(0..)=8
-Extruder0_ExtrusionInfillWidth(mm)=0.5
 Extruder1_ArcShortSides(0..)=1
-Extruder2_OffsetX(mm)=0
-Extruder2_SlowXYFeedrate(mm/minute)=1500.0
-Extruder3_ExtrusionSize(mm)=0.3
-Extruder3_ExtrusionBroadWidth(mm)=6
-Extruder3_ExtrusionInfillWidth(mm)=1.5
-Extruder3_OffsetY(mm)=0
+Extruder1_ColourB(0..1)=0.3
+Extruder1_ColourG(0..1)=0.6
+Extruder1_ColourR(0..1)=0.9
+Extruder1_CoolingPeriod(s)=-1
+Extruder1_EvenHatchDirection(degrees)=45
+Extruder1_ExtrudeRatio(0..)=1
+Extruder1_ExtrusionBroadWidth(mm)=2.5
+Extruder1_ExtrusionDelayForLayer(ms)=500
+Extruder1_ExtrusionDelayForPolygon(ms)=50
+Extruder1_ExtrusionFoundationWidth(mm)=2
+Extruder1_ExtrusionHeight(mm)=0.25
+Extruder1_ExtrusionInfillWidth(mm)=2
+Extruder1_ExtrusionLastFoundationWidth(mm)=1
+Extruder1_ExtrusionOverRun(mm)=3
+Extruder1_ExtrusionPWM(0..1)=-1
+Extruder1_ExtrusionSize(mm)=0.5
 Extruder1_ExtrusionSpeed(mm/minute)=2500
-Extruder0_ColourB(0..1)=0.6
-Extruder1_ExtrudeRatio(0..)=1
-Extruder1_ColourR(0..1)=0.9
+Extruder1_ExtrusionTemp(C)=205
+Extruder1_FastEFeedrate(mm/minute)=18000.0
+Extruder1_FastXYFeedrate(mm/minute)=2500.0
+Extruder1_InFillMaterialType(name)=PLA-support
+Extruder1_InfillOverlap(mm)=0
+Extruder1_InfillSpeed(0..1)=1
+Extruder1_Lift(mm)=0
+Extruder1_MaterialType(name)=PLA-support
+Extruder1_MaxAcceleration(mm/minute/minute)=1200000.0
 Extruder1_MiddleStart=true
-Extruder3_ColourB(0..1)=0.3
-Extruder0_ValveOverRun(mm)=-1
-Extruder0_Lift(mm)=0
-Extruder0_NumberOfShells(0..N)=2
-Extruder3_EvenHatchDirection(degrees)=45
+Extruder1_NumberOfShells(0..N)=0
+Extruder1_OddHatchDirection(degrees)=45
+Extruder1_OffsetX(mm)=0
+Extruder1_OffsetY(mm)=0
+Extruder1_OffsetZ(mm)=0
 Extruder1_OutlineSpeed(0..1)=0.9
-Extruder0_Purge(ms)=30000
-Extruder0_MaterialType(name)=PLA
-Extruder3_ExtrusionDelayForLayer(ms)=600
-Extruder2_ExtrusionTemp(C)=205
-Extruder3_OddHatchDirection(degrees)=-45
+Extruder1_Purge(ms)=30000
+Extruder1_Reverse(ms)=1200
+Extruder1_SlowXYFeedrate(mm/minute)=1500.0
+Extruder1_SupportMaterialType(name)=null
+Extruder1_ValveDelayForLayer(ms)=200
+Extruder1_ValveDelayForPolygon(ms)=200
 Extruder1_ValveOverRun(mm)=2
-Extruder2_SupportMaterialType(name)=null
-PathOptimise=true
-Extruder0_OffsetY(mm)=0
-Extruder1_OffsetZ(mm)=0
-Extruder1_Reverse(ms)=1200
-Extruder1_ExtrusionDelayForLayer(ms)=500
-Extruder1_Lift(mm)=0
-InterLayerCooling=true
-Extruder0_CoolingPeriod(s)=-1
 Extruder1_ValvePulseTime(ms)=-500
-Extruder1_OddHatchDirection(degrees)=45
+Extruder2_Address=0
+Extruder2_ArcCompensationFactor(0..)=8
+Extruder2_ArcShortSides(0..)=1
+Extruder2_ColourB(0..1)=0.3
+Extruder2_ColourG(0..1)=0.8
+Extruder2_ColourR(0..1)=0.3
+Extruder2_CoolingPeriod(s)=-1
 Extruder2_EvenHatchDirection(degrees)=45
-SlowXYFeedrate(mm/minute)=1500.0
-Extruder1_Purge(ms)=30000
-Extruder1_EvenHatchDirection(degrees)=45
+Extruder2_ExtrudeRatio(0..)=1
+Extruder2_ExtrusionBroadWidth(mm)=6
+Extruder2_ExtrusionDelayForLayer(ms)=500
+Extruder2_ExtrusionDelayForPolygon(ms)=50
+Extruder2_ExtrusionFoundationWidth(mm)=2
+Extruder2_ExtrusionHeight(mm)=0.25
+Extruder2_ExtrusionInfillWidth(mm)=1.5
+Extruder2_ExtrusionLastFoundationWidth(mm)=2
+Extruder2_ExtrusionOverRun(mm)=0
+Extruder2_ExtrusionPWM(0..1)=-1
+Extruder2_ExtrusionSize(mm)=0.5
+Extruder2_ExtrusionSpeed(mm/minute)=2500
+Extruder2_ExtrusionTemp(C)=205
+Extruder2_FastEFeedrate(mm/minute)=18000.0
+Extruder2_FastXYFeedrate(mm/minute)=2500.0
+Extruder2_InFillMaterialType(name)=PLA-infill
+Extruder2_InfillOverlap(mm)=0.2
+Extruder2_InfillSpeed(0..1)=1
+Extruder2_Lift(mm)=0
+Extruder2_MaterialType(name)=PLA-infill
+Extruder2_MaxAcceleration(mm/minute/minute)=1200000.0
+Extruder2_MiddleStart=true
+Extruder2_NumberOfShells(0..N)=1
+Extruder2_OddHatchDirection(degrees)=-45
+Extruder2_OffsetX(mm)=0
+Extruder2_OffsetY(mm)=0
+Extruder2_OffsetZ(mm)=0
+Extruder2_OutlineSpeed(0..1)=0.9
+Extruder2_Purge(ms)=30000
+Extruder2_Reverse(ms)=1200
+Extruder2_SeparationOutlineSpeed(0..1)=1
+Extruder2_SlowXYFeedrate(mm/minute)=1500.0
+Extruder2_SupportMaterialType(name)=null
+Extruder2_ValveDelayForLayer(ms)=200
+Extruder2_ValveDelayForPolygon(ms)=200
+Extruder2_ValveOverRun(mm)=2
+Extruder2_ValvePulseTime(ms)=-500
 Extruder3_Address=1
+Extruder3_ArcCompensationFactor(0..)=8
+Extruder3_ArcShortSides(0..)=1
+Extruder3_ColourB(0..1)=0.3
+Extruder3_ColourG(0..1)=0.3
+Extruder3_ColourR(0..1)=0.3
+Extruder3_CoolingPeriod(s)=0.1
+Extruder3_EvenHatchDirection(degrees)=45
+Extruder3_ExtrudeRatio(0..)=1
+Extruder3_ExtrusionBroadWidth(mm)=6
+Extruder3_ExtrusionDelayForLayer(ms)=600
+Extruder3_ExtrusionDelayForPolygon(ms)=500
+Extruder3_ExtrusionFoundationWidth(mm)=2
+Extruder3_ExtrusionHeight(mm)=0.25
+Extruder3_ExtrusionInfillWidth(mm)=1.5
+Extruder3_ExtrusionLastFoundationWidth(mm)=2
+Extruder3_ExtrusionOverRun(mm)=0
+Extruder3_ExtrusionPWM(0..1)=-1
+Extruder3_ExtrusionSize(mm)=0.3
+Extruder3_ExtrusionSpeed(mm/minute)=2500
 Extruder3_ExtrusionTemp(C)=0
-Extruder2_ValveDelayForLayer(ms)=200
-Extruder0_EvenHatchDirection(degrees)=45
-Extruder2_ArcShortSides(0..)=1
+Extruder3_FastEFeedrate(mm/minute)=8000.0
 Extruder3_FastXYFeedrate(mm/minute)=2500.0
-Extruder2_ValveOverRun(mm)=2
-Extruder0_SlowXYFeedrate(mm/minute)=1500.0
+Extruder3_InFillMaterialType(name)=null
 Extruder3_InfillOverlap(mm)=0.2
-WorkingZ(mm)=300
-Extruder1_ExtrusionSize(mm)=0.5
-CommsDebug=false
-Extruder1_CoolingPeriod(s)=-1
-Extruder0_Address=0
-Extruder2_Lift(mm)=0
-Extruder2_OutlineSpeed(0..1)=0.9
-DumpY(mm)=5
-Extruder1_FastEFeedrate(mm/minute)=18000.0
+Extruder3_InfillSpeed(0..1)=0.9
+Extruder3_Lift(mm)=0
+Extruder3_MaterialType(name)=PCB-pen
+Extruder3_MaxAcceleration(mm/minute/minute)=1200000.0
+Extruder3_MiddleStart=true
+Extruder3_NumberOfShells(0..N)=1
+Extruder3_OddHatchDirection(degrees)=-45
+Extruder3_OffsetX(mm)=0
+Extruder3_OffsetY(mm)=0
+Extruder3_OffsetZ(mm)=0
+Extruder3_OutlineSpeed(0..1)=0.9
+Extruder3_Purge(ms)=10000
+Extruder3_Reverse(ms)=400
+Extruder3_SeparationOutlineSpeed(0..1)=1
+Extruder3_SlowXYFeedrate(mm/minute)=1500.0
+Extruder3_SupportMaterialType(name)=null
+Extruder3_ValveDelayForLayer(ms)=200
 Extruder3_ValveDelayForPolygon(ms)=200
-Extruder2_Purge(ms)=30000
-Extruder1_MaterialType(name)=PLA-support
+Extruder3_ValveOverRun(mm)=2
+Extruder3_ValvePulseTime(ms)=500
 FinishX(mm)=10
-Extruder3_ExtrusionFoundationWidth(mm)=2
-Extruder1_InFillMaterialType(name)=PLA-support
-Extruder2_ExtrusionFoundationWidth(mm)=2
-Extruder3_OffsetX(mm)=0
+FinishY(mm)=190
+FiveD=true
+FoundationLayers=0
+InterLayerCooling=true
+MaxXYAcceleration(mm/mininute/minute)=1200000
+MaxZAcceleration(mm/mininute/minute)=3000
+MaximumFeedrateX(mm/minute)=2500
+MaximumFeedrateY(mm/minute)=2500
 MaximumFeedrateZ(mm/minute)=50
-Extruder0_ExtrusionPWM(0..1)=-1
-Extruder1_ColourG(0..1)=0.6
-Extruder1_ExtrusionFoundationWidth(mm)=2
-Extruder2_MiddleStart=true
-MaxZAcceleration(mm/mininute/minute)=3000
-Extruder0_ValveDelayForPolygon(ms)=200
-Extruder0_SupportMaterialType(name)=null
-Extruder2_ColourR(0..1)=0.3
-Extruder1_ExtrusionInfillWidth(mm)=2
-Extruder0_ExtrusionFoundationWidth(mm)=2
-Extruder3_Lift(mm)=0
-Extruder2_ValvePulseTime(ms)=-500
-Extruder1_InfillOverlap(mm)=0
-Extruder3_SeparationOutlineSpeed(0..1)=1
-Extruder3_ValveOverRun(mm)=2
-Extruder3_ArcShortSides(0..)=1
-Extruder3_Purge(ms)=10000
-Extruder2_SeparationOutlineSpeed(0..1)=1
-Extruder2_ExtrusionSpeed(mm/minute)=2500
-Extruder3_MaxAcceleration(mm/minute/minute)=1200000.0
+NumberOfExtruders=4
+PathOptimise=true
+Port(name)=/dev/ttyUSB0 
+Shield=false
+SlowXYFeedrate(mm/minute)=1500.0
+SlowZFeedrate(mm/minute)=50.0
+WorkingX(mm)=300
+WorkingY(mm)=300
+WorkingZ(mm)=300


This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.


