From: SourceForge.net <no...@so...> - 2006-04-25 20:58:11
|
Bugs item #1476393, was opened at 2006-04-25 13:58 Message generated for change (Tracker Item Submitted) made by Item Submitter You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=381347&aid=1476393&group_id=24366 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 5 Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: serial redirection control signal problem Initial Comment: I am using latest rdesktop cvs (2006-04-25) to conect to XP pro Sp2 from Mandrake 10.0 machine. I have used command line option "-r comport:COM1=/dev/ttyS0" for serial redirection and connected an external modem to ttyS0 of my Linux box. I am able to add this modem on XP and successfully diagnose it thru control panel applet. I can also communicate with the modem using Hyperterminal if I select COM1 port at "Connect Using" dropdown list of Hyperterminal. However, if I select the modem device on this list, I can not communicate with the modem. Its always show "disconnected" message. Below is modem log file. Same problem when I set up a dial-up connection and try to dial a number. It seems that there is a serial control signal handling problem at rdesktop when modem driver used instead of direct COM port on Windows machine. When I used microsoft rdp client on same client device everything works fine. Thanks in advance for any clue. John 04-25-2006 18:16:57.671 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600 04-25-2006 18:16:57.671 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600 04-25-2006 18:16:57.671 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600 04-25-2006 18:16:57.671 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600 04-25-2006 18:16:57.671 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600 04-25-2006 18:16:57.671 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600 04-25-2006 18:16:57.671 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600 04-25-2006 18:16:57.671 - Modem type: Standard 56000 bps Modem 04-25-2006 18:16:57.671 - Modem inf path: mdmgen.inf 04-25-2006 18:16:57.671 - Modem inf section: Gen556F 04-25-2006 18:16:57.671 - Matching hardware ID: moto1_gen 04-25-2006 18:16:57.671 - 115200,8,N,1, ctsfl=1, rtsctl=2 04-25-2006 18:16:57.671 - Initializing modem. 04-25-2006 18:16:57.671 - DSR is low while initializing the modem. Verify modem is turned on. 04-25-2006 18:16:57.671 - CTS is low while initializing modem. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=381347&aid=1476393&group_id=24366 |