:: raider version 0.13.2 started
:: Option: Single disk to RAID 1 (MIRRORING)
:: Distro name and version: openSUSE 12.3
:: Distro edition: openSUSE 12.3 (i586)
:: Test Status (in lab): Tested successfully on similar major version
:: Advice: Raider will probably succeed.
:: Disks selected (2):
:: /dev/sda: VBOX Model: HARDDISK Serial: VBf08c489e-46f3ab3a (1T)
:: /dev/sdb: VBOX Model: HARDDISK Serial: VBe1f41f45-a9768ed2 (1T)
:: /dev/sda partition table type: MBR/msdos
:: Bootloader found in the boot sector: GRUB patched
** :: GRUB 1 version: 0.97 <= It's wrong! **
:: Grub configuration file found in /boot/grub2/grub.cfg
:: GRUB bootloader does not have references to a initrd file
:: Initramfs generator: mkinitrd
:: Initramfs generator command: "mkinitrd"
:: You are not running in "single mode"
:: This is ok for openSUSE 12.3 (i586). Good...
:: BuildRaid phase will start now!
:: There are 2.29GB of data to be copied to the new raid system
:: BuildRaid phase will take a long time, maybe several minutes to one hour(?).
:: Do you want to continue? (y/[n])
(...)
Features: acpi plymouth block usb md resume.userspace resume.kernel
Kernel image: /boot/vmlinuz-3.7.10-1.1-default
Initrd image: /boot/initrd-3.7.10-1.1-default
Root device: /dev/disk/by-id/md-uuid-3a82ea0e:21d4f470:97ca7dc8:2e9ff661 (/dev/md1) (mounted on / as ext4)
Resume device: /dev/disk/by-id/ata-VBOX_HARDDISK_VBf08c489e-46f3ab3a-part1 (/dev/sda1)
Kernel Modules: hwmon thermal_sys thermal processor fan libata libahci ahci ata_piix ata_generic rtc-cmos scsi_dh scsi_dh_alua scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw pata_cs5536 sata_vsc ahci_platform pata_sl82c105 pata_oldpiix pdc_adma pata_triflex pata_amd pata_jmicron sata_sil sata_svw pata_optidma sata_highbank pata_efar sata_sx4 pata_atp867x pata_ninja32 pata_cmd640 pata_netcell pata_cmd64x pata_cs5520 pata_rz1000 pata_sc1200 pata_atiixp pata_ns87415 acard-ahci pata_sch pata_hpt366 sata_inic162x pata_sis sata_sis pata_legacy pata_mpiix pata_marvell sata_uli pata_rdc pata_artop sata_mv pata_ali sata_qstor pata_pdc202xx_old pata_hpt3x2n pata_sil680 pata_via pata_pdc2027x sata_nv pata_cypress pata_ns87410 pata_cs5530 pata_piccolo pata_it8213 sata_via pata_cs5535 pata_radisys pcmcia_core pcmcia pata_pcmcia sata_sil24 pata_serverworks pata_arasan_cf pata_isapnp pata_acpi pata_hpt3x3 sata_promise pata_it821x pata_hpt37x pata_opti usb-common usbcore ohci-hcd uhci-hcd ehci-hcd xhci-hcd hid usbhid hid-logitech-dj hid-generic raid0 raid1 raid10 async_tx async_memcpy xor async_xor raid6_pq async_pq async_raid6_recov raid456
Features: acpi plymouth block usb md resume.userspace resume.kernel
Perl-Bootloader: 2013-08-07 17:51:50 <3> pbl-1786.2 Core::RunCommand.1642: Error: Command '/usr/sbin/grub2-install --target=i386-pc --force --skip-fs-probe "(hd0,2)" >/var/log/YaST2/y2log_bootloader 2>&1' failed with code 256 and output: /usr/sbin/grub2-probe: warning: Couldn't find physical volume (null)'. Some modules may be missing from core image..
/usr/sbin/grub2-probe: warning: Couldn't find physical volume(null)'. Some modules may be missing from core image..
/usr/sbin/grub2-bios-setup: warning: File system `ext2' doesn't support embedding.
/usr/sbin/grub2-bios-setup: error: embedding is not possible, but this is required for RAID and LVM install.
There was an error generating the initrd (1)
Error_chroot_mkinitrd
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename. ]
grub> root (hd1,1)
Filesystem type is ext2fs, partition type 0xfd
grub> setup (hd1)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd1)"... 17 sectors are embedded.
succeeded
Running "install /boot/grub/stage1 (hd1) (hd1)1+17 p (hd1,1)/boot/grub/stage2 /boot/grub/menu.lst"... succeeded
Done.
grub> quit
Thanks in advance.
[]'s
anckerdj
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm trying to use the raider in opensuse 12.3 but raider apparently does not recognize the grub correctly.
Any tips how to solve this?
See logs:
rpm -qa | grep -i grub
grub2-i386-pc-2.00-19.23.1.i586
grub-0.97-188.1.1.i586
grub2-i386-efi-2.00-19.23.1.i586
grub2-2.00-19.23.1.i586
grub2-efi-2.00-19.23.1.i586
grub2-branding-openSUSE-12.3-6.38.1.noarch
raider -R1
:: raider version 0.13.2 started
:: Option: Single disk to RAID 1 (MIRRORING)
:: Distro name and version: openSUSE 12.3
:: Distro edition: openSUSE 12.3 (i586)
:: Test Status (in lab): Tested successfully on similar major version
:: Advice: Raider will probably succeed.
:: Disks selected (2):
:: /dev/sda: VBOX Model: HARDDISK Serial: VBf08c489e-46f3ab3a (1T)
:: /dev/sdb: VBOX Model: HARDDISK Serial: VBe1f41f45-a9768ed2 (1T)
:: /dev/sda partition table type: MBR/msdos
:: Bootloader found in the boot sector: GRUB patched
** :: GRUB 1 version: 0.97 <= It's wrong! **
:: Grub configuration file found in /boot/grub2/grub.cfg
:: GRUB bootloader does not have references to a initrd file
:: Initramfs generator: mkinitrd
:: Initramfs generator command: "mkinitrd"
:: You are not running in "single mode"
:: This is ok for openSUSE 12.3 (i586). Good...
:: BuildRaid phase will start now!
:: There are 2.29GB of data to be copied to the new raid system
:: BuildRaid phase will take a long time, maybe several minutes to one hour(?).
:: Do you want to continue? (y/[n])
(...)
Features: acpi plymouth block usb md resume.userspace resume.kernel
Kernel image: /boot/vmlinuz-3.7.10-1.1-default
Initrd image: /boot/initrd-3.7.10-1.1-default
Root device: /dev/disk/by-id/md-uuid-3a82ea0e:21d4f470:97ca7dc8:2e9ff661 (/dev/md1) (mounted on / as ext4)
Resume device: /dev/disk/by-id/ata-VBOX_HARDDISK_VBf08c489e-46f3ab3a-part1 (/dev/sda1)
Kernel Modules: hwmon thermal_sys thermal processor fan libata libahci ahci ata_piix ata_generic rtc-cmos scsi_dh scsi_dh_alua scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw pata_cs5536 sata_vsc ahci_platform pata_sl82c105 pata_oldpiix pdc_adma pata_triflex pata_amd pata_jmicron sata_sil sata_svw pata_optidma sata_highbank pata_efar sata_sx4 pata_atp867x pata_ninja32 pata_cmd640 pata_netcell pata_cmd64x pata_cs5520 pata_rz1000 pata_sc1200 pata_atiixp pata_ns87415 acard-ahci pata_sch pata_hpt366 sata_inic162x pata_sis sata_sis pata_legacy pata_mpiix pata_marvell sata_uli pata_rdc pata_artop sata_mv pata_ali sata_qstor pata_pdc202xx_old pata_hpt3x2n pata_sil680 pata_via pata_pdc2027x sata_nv pata_cypress pata_ns87410 pata_cs5530 pata_piccolo pata_it8213 sata_via pata_cs5535 pata_radisys pcmcia_core pcmcia pata_pcmcia sata_sil24 pata_serverworks pata_arasan_cf pata_isapnp pata_acpi pata_hpt3x3 sata_promise pata_it821x pata_hpt37x pata_opti usb-common usbcore ohci-hcd uhci-hcd ehci-hcd xhci-hcd hid usbhid hid-logitech-dj hid-generic raid0 raid1 raid10 async_tx async_memcpy xor async_xor raid6_pq async_pq async_raid6_recov raid456
Features: acpi plymouth block usb md resume.userspace resume.kernel
Perl-Bootloader: 2013-08-07 17:51:50 <3> pbl-1786.2 Core::RunCommand.1642: Error: Command '/usr/sbin/grub2-install --target=i386-pc --force --skip-fs-probe "(hd0,2)" >/var/log/YaST2/y2log_bootloader 2>&1' failed with code 256 and output: /usr/sbin/grub2-probe: warning: Couldn't find physical volume
(null)'. Some modules may be missing from core image.. /usr/sbin/grub2-probe: warning: Couldn't find physical volume(null)'. Some modules may be missing from core image../usr/sbin/grub2-bios-setup: warning: File system `ext2' doesn't support embedding.
/usr/sbin/grub2-bios-setup: error: embedding is not possible, but this is required for RAID and LVM install.
There was an error generating the initrd (1)
Error_chroot_mkinitrd
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename. ]
grub> root (hd1,1)
Filesystem type is ext2fs, partition type 0xfd
grub> setup (hd1)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd1)"... 17 sectors are embedded.
succeeded
Running "install /boot/grub/stage1 (hd1) (hd1)1+17 p (hd1,1)/boot/grub/stage2 /boot/grub/menu.lst"... succeeded
Done.
grub> quit
Thanks in advance.
[]'s
anckerdj