Re: [Quexf-discuss] Banding problems (mostly)

[Adam Z. <ada...@ac...>]

Dear Tom,

1) I have only tested queXF with A4 size pages, as this is the default
output of a queXML form. It should be possible to use different size
forms though, as long as they retain the corner edges and barcode on
each page. Also, queXF will have to have the form configured using the
page setup function.

2) Can you send through a PDF of your scanned and un-scanned form for
testing? Make sure to use a printed and scanned form for setting up
the banding. Also make sure that the scanner is set to Monochrome (1
bit) at 300DPI.

Regards,
Adam Zammit

2009/12/2 Tom Murphy <am...@gm...>:
> Hello,
>     Thank you for your great program and what seems like healthy support
> community. I've set up queXML and queXF, and am having two problems:
> 1) Although it doesn't say so on the queXF page, it appears I am only able
> to import 8 1/2" x 11" survey pages. Is this standard? It would be much more
> convenient if I were able to use smaller questionnaire cards.
>
> 2) Banding isn't working at all. I've been looking through the support
> pages, but mostly the recommendation is to import a non-scanned form. I
> generated mine with the terminal command recommended, but queXM won't accept
> it.
> Attached are a few images of banding problems. "aPicture 4" shows my
> attempts to band uniformly-sized, horizontally- and vertically-oriented
> boxes.
>
> Thank you for your time!
> Tom Murphy
> ------------------------------------------------------------------------------
> Join us December 9, 2009 for the Red Hat Virtual Experience,
> a free event focused on virtualization and cloud computing.
> Attend in-depth sessions from your desk. Your couch. Anywhere.
> http://p.sf.net/sfu/redhat-sfdev2dev
> _______________________________________________
> Quexf-discuss mailing list
> Que...@li...
> https://lists.sourceforge.net/lists/listinfo/quexf-discuss
>
>