[Quantlib-dev] Still problems compiling QuantLibAddIn under Linux

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Hi Eric, hi Luigi,

Sorry, to bother you again.
I am still struggling with the compilation of QuantLibAddIn under Linux.

Luigi, you mentioned that you added some "patches" to the current
development branch (Linux). So I today retrieved the modules QuantLib,
ObjectHandler and QuantLibAddin via anon-cvs and tried to compile and 
link the modules again (in the above order).

As before there were no problems with QuantLib and ObjectHandler. When 
trying to compile the QuantLibAddin module in the same way as described
previously (please see below), however, I encountered the following 
errors:

--- SCHNIPP ---
[wpe@metallica QuantLibAddin]$ make
Making all in Autogen
make[1]: Entering directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/Autogen'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/Autogen'
Making all in qla
make[1]: Entering directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/qla'
make  all-am
make[2]: Entering directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/qla'
make[2]: Leaving directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/qla'
make[1]: Leaving directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/qla'
Making all in Addins/C
make[1]: Entering directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/Addins/C'
if /bin/sh ../../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
-I../../qla  -I../.. -I/home/wpe/projects/quantlib_cvs_devel/ObjectHandler
-I/home/wpe/projects/quantlib_cvs_devel/QuantLib/include/  -g -O2 -Wall -MT
options.lo -MD -MP -MF ".deps/options.Tpo" -c -o options.lo options.cpp; \
then mv -f ".deps/options.Tpo" ".deps/options.Plo"; else rm -f
".deps/options.Tpo"; exit 1; fi
 g++ -DHAVE_CONFIG_H -I. -I. -I../../qla -I../..
-I/home/wpe/projects/quantlib_cvs_devel/ObjectHandler
-I/home/wpe/projects/quantlib_cvs_devel/QuantLib/include/ -g -O2 -Wall -MT
options.lo -MD -MP -MF .deps/options.Tpo -c options.cpp  -fPIC -DPIC -o
.libs/options.o
options.cpp: In function `int QL_OPTION_ASIAN_D(char*, char*, char*, double,
   long int, long int, long int*, char*, char*, double, char*, long int,
long
   int, char*, long int, VariesList*)':
options.cpp:87: error: no matching function for call to `Conversion<long
int>::
   convertVector(long int*&, long int&)'
../../Addins/C/varies.hpp:28: error: candidates are: static
   std::vector<array_type, std::allocator<_CharT> >
   Conversion<T>::convertVector(const T*&, const long int&) [with T = long
int]
../../Addins/C/varies.hpp:35: error:                 static
   std::vector<std::string, std::allocator<std::string> >
   Conversion<T>::convertVector(char**&, const long int&) [with T = long
int]
options.cpp: In function `int QL_OPTION_CLIQUET(char*, char*, long int, long
   int*, char*, double, long int, char*, long int, VariesList*)':
options.cpp:212: error: no matching function for call to `Conversion<long
int>
   ::convertVector(long int*&, long int&)'
../../Addins/C/varies.hpp:28: error: candidates are: static
   std::vector<array_type, std::allocator<_CharT> >
   Conversion<T>::convertVector(const T*&, const long int&) [with T = long
int]
../../Addins/C/varies.hpp:35: error:                 static
   std::vector<std::string, std::allocator<std::string> >
   Conversion<T>::convertVector(char**&, const long int&) [with T = long
int]
options.cpp: In function `int QL_OPTION_DIVIDENDVANILLA(char*, char*, long
int,
   long int*, long int, double*, char*, char*, double, char*, long int, long
   int, char*, long int, VariesList*)':
options.cpp:251: error: no matching function for call to `Conversion<long
int>
   ::convertVector(long int*&, long int&)'
../../Addins/C/varies.hpp:28: error: candidates are: static
   std::vector<array_type, std::allocator<_CharT> >
   Conversion<T>::convertVector(const T*&, const long int&) [with T = long
int]
../../Addins/C/varies.hpp:35: error:                 static
   std::vector<std::string, std::allocator<std::string> >
   Conversion<T>::convertVector(char**&, const long int&) [with T = long
int]
options.cpp:253: error: no matching function for call to
`Conversion<double>::
   convertVector(double*&, long int&)'
../../Addins/C/varies.hpp:28: error: candidates are: static
   std::vector<array_type, std::allocator<_CharT> >
   Conversion<T>::convertVector(const T*&, const long int&) [with T =
double]
../../Addins/C/varies.hpp:35: error:                 static
   std::vector<std::string, std::allocator<std::string> >
   Conversion<T>::convertVector(char**&, const long int&) [with T = double]
make[1]: *** [options.lo] Error 1
make[1]: Leaving directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/Addins/C'
make: *** [all-recursive] Error 1
[wpe@metallica QuantLibAddin]$
--- SCHNAPP ---

Your help is (as always) highly appreciated,

wpe

-----Original Message-----
From: qua...@li...
[mailto:qua...@li...]On Behalf Of
qua...@li...
Sent: Saturday, February 19, 2005 5:33 AM
To: qua...@li...
Subject: Quantlib-dev digest, Vol 1 #285 - 5 msgs

Send Quantlib-dev mailing list submissions to
	qua...@li...

To subscribe or unsubscribe via the World Wide Web, visit
	https://lists.sourceforge.net/lists/listinfo/quantlib-dev
or, via email, send a message with subject or body 'help' to
	qua...@li...

You can reach the person managing the list at
	qua...@li...

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Quantlib-dev digest..."

Today's Topics:

   1. [ quantlib-Bugs-1143732 ] VC6 Compliation Error (SourceForge.net)
   2. ObjectHandler and QuantLibAddin (Penschke, Walter)
   3. Re: ObjectHandler and QuantLibAddin (eric ehlers)
   4. ObjectHandler and QuantLibAddin II (Penschke, Walter)
   5. Re: ObjectHandler and QuantLibAddin (Luigi Ballabio)

Message: 2
From: "Penschke, Walter" <Wal...@co...>
To: "'qua...@li...'"
<qua...@li...>
Date: Fri, 18 Feb 2005 14:55:31 +0100
Subject: [Quantlib-dev] ObjectHandler and QuantLibAddin

Hi Eric,

sorry that I could not respong to you earlier.

Before I get come to your response to my initial email I'd like to address
that I have problems getting 
QuantLibAddIn compiled from the actual development backup tar-ball. With QL
and ObjectHandler 
everything went fine. Here is what I did (Linux as OS):

- Downloaded the development tar ball and extracted it locally.

- Set CVSROOT to the just extracted local CVS repository and checked out the

modules QuantLib, ObjectHandler and QuantLibAddin.

- Compiled QuantLib and ObjectHandler successfully like that:
$ ./autogen.sh 
$ ./configure --prefix=`pwd`
$ make 
$ make install

- Tried to compile QuantLibAddin like that:
$ ./autogen.sh
$ ./configure --prefix=`pwd` CPPFLAGS="-I<PATH_TO_OBJECTHANDLER>
-I<PATH_TO_QUANTLIB>/include" LDFLAGS="-L<PATH_TO_OBJECTHANDLER>/lib
-L<PATH_TO_QUANTLIB>/lib"
$ make

This make command seems to compile and link the directory
QuantLibAddin/qla/objects successfully 
but runs into problems with the directory QuantLibAddin/qla/functions. Here
is the end of the generated output:

--- SCHNIPP ---
g++ -DHAVE_CONFIG_H -I. -I. -I../../qla -I../..
-I/home/wpe/projects/quantlib_cvs_devel/ObjectHandler/
-I/home/wpe/projects/quantlib_cvs_devel/QuantLib/include -g -O2 -Wall -MT
vanillaoption.lo -MD -MP -MF .deps/vanillaoption.Tpo -c vanillaoption.cpp -o
vanillaoption.o >/dev/null 2>&1
/bin/sh ../../libtool --mode=link g++  -g -O2 -Wall
-L/home/wpe/projects/quantlib_cvs_devel/ObjectHandler/lib
-L/home/wpe/projects/quantlib_cvs_devel/QuantLib/lib -o libObjects.la
asianoption.lo barrieroption.lo basketoption.lo cliquetoption.lo
dividendvanillaoption.lo forwardvanillaoption.lo optionutils.lo
stochasticprocess.lo vanillaoption.lo
ar cru .libs/libObjects.a .libs/asianoption.o .libs/barrieroption.o
.libs/basketoption.o .libs/cliquetoption.o .libs/dividendvanillaoption.o
.libs/forwardvanillaoption.o .libs/optionutils.o .libs/stochasticprocess.o
.libs/vanillaoption.o
ranlib .libs/libObjects.a
creating libObjects.la
(cd .libs && rm -f libObjects.la && ln -s ../libObjects.la libObjects.la)
make[3]: Leaving directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/qla/objects'
Making all in functions
make[3]: Entering directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/qla/functions'
make[3]: *** No rule to make target `options.cpp', needed by `options.lo'.
Stop.
make[3]: Leaving directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/qla/functions'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/qla'
make[1]: *** [all] Error 2
make[1]: Leaving directory
`/opt/projects/quantlib_cvs_devel/QuantLibAddin/qla'
make: *** [all-recursive] Error 1
[wpe@metallica QuantLibAddin]$
--- SCHNAPP ---

Having a look in the corresponding QuantLibAddin/qla/functions/Makefile it
seems that it expects a source file options.cpp. However in the 
corresponding directory there is no such file.

Any help would be highly appreciated. Thanks in advance.

wpe

--__--__--

Message: 3
Date: Fri, 18 Feb 2005 14:32:25 +0000
From: eric ehlers <eri...@gm...>
Reply-To: eric ehlers <eri...@gm...>
To: qua...@li...
Subject: Re: [Quantlib-dev] ObjectHandler and QuantLibAddin

Hi Walter

> Having a look in the corresponding QuantLibAddin/qla/functions/Makefile it
> seems that it expects a source file options.cpp. However in the
> corresponding directory there is no such file.

Much of the QuantLibAddin source code is autogenerated, you need to cd
to the Autogen directory and run autogen.py.  Sorry for not mentioning
that anywhere!, I'll add it to the readme file.

Some other notes on recompiling ...
- compiling the Calc Linux addin requires some extra steps which I
haven't gotten around to documenting.  If you need that please let me
know.  The Calc addin on Windows should compile as documented.
- On Windows I use MSDEV6 and those project workspace files are always
up to date.  I try to propogate changes to the other IDEs with
grep/sed but they may be broken.

Very much looking forward to your feedback.

Regards
Eric

--__--__--

Message: 5
Date: Fri, 18 Feb 2005 16:09:07 +0000
From: Luigi Ballabio <lui...@gm...>
Subject: Re: [Quantlib-dev] ObjectHandler and QuantLibAddin
To: eric ehlers <eri...@gm...>
Cc: qua...@li...

On 02/18/05 15:32:25, eric ehlers wrote:
> Much of the QuantLibAddin source code is autogenerated, you need to cd
> to the Autogen directory and run autogen.py.  Sorry for not mentioning
> that anywhere!, I'll add it to the readme file.

I just committed a couple of small patches---under Linux, 'make' will now
=20
invoke autogen.py before building the addins.

> Some other notes on recompiling ...
> - compiling the Calc Linux addin requires some extra steps which I
> haven't gotten around to documenting.  If you need that please let me
> know.

Or if you don't have Calc installed, use
./configure --disable-calc
to inhibit Calc-specific compilations.

Later,
	Luigi

----------------------------------------

Every solution breeds new problems.
-- unknown

--__--__--

_______________________________________________
Quantlib-dev mailing list
Qua...@li...
https://lists.sourceforge.net/lists/listinfo/quantlib-dev

End of Quantlib-dev Digest