i can't sending analog value to IEC 870-5-104 Simulator

IEC 60870-5-104 protocol tester.

Brought to you by: ricardolo

i can't sending analog value to IEC 870-5-104 Simulator

Forum: General Discussion

Created: 2016-10-03

Updated: 2016-12-18

irfan - 2016-10-03

hello ricardolo, i have a problem
i can send and receive data digital from IEC 870-5-104 Simulator, IEC 870-5-104 Simulator can sending analog value to QTester104, but when i try to sending analog data from QTester104 to the IEC 870-5-104 Simulator, value indicator in IEC 870-5-104 Simulator can't change.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

ricardolo - 2016-10-03

Hi Irfan,

You are right, that's because I haven't implemented analog commands in versions 1.14 and below.
I will post an updated (1.15) version soon that will support analog commands.

Regards

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

ricardolo - 2016-10-03

Irfan, the software was updated, you can download version 1.15 and test the analog commands again selecting the command types 48, 49, 50, 61, 62 or 63.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

irfan - 2016-10-04

thank you very much for update, i hope now i can sending analog data to IEC Simulator.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

irfan - 2016-10-19

hi ricardo, i need help again. how to change asdu address slave in the protocol and how to sending clock synchronization command to slave ?
thanks.

Last edit: irfan 2016-10-19

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

ricardolo - 2016-10-19

Hi Irfan,
The C_CS_NA_1 Clock sync command it's easy to implement, I'll add it as another command option.
The ASDU Address field you mention you need to set is for commands?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

ricardolo - 2016-10-19

You can now send C_CS_NA_1 Clock sync command in version 1.16.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

irfan - 2016-10-20

thaks ricardo, for the update.
yes, i need that ASDU Address for controlling multiple RTU, can you help me for this problem ?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

ricardolo - 2016-10-20

Ok Irfan, try version 1.17.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

irfan - 2016-10-21

thanks ricardo. you qTester104 very helpful to me

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

ricardolo - 2016-10-21

Hope it can help you accomplish your work Irfan.
Regards

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

irfan - 2016-12-06

hi ricardo,
i got new problem. can you help me again?
how to connect in multiple RTU with different ip in same time ?

Last edit: irfan 2016-12-06

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

ricardolo - 2016-12-06

Hi Irfan.
No, this is currently not possible.
What is possible is to define a backup RTU, so QTester connect to it when the main RTU fails.
Also you can have two instances of QTester104 running simultaneously each one conected to a different RTU.
I can recommend you the Enilit CMS software demo, it can do many things, maybe it can solve your problem. You can request it at: http://www.enilit.lt/index.php?page=downloads.
Regards.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

irfan - 2016-12-14

thaks for your info. this is very helpfull to me
and thanks for all ricardo :D

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

ricardolo - 2016-12-18

Dear Irfan,
It is always a pleasure to help.
Regards

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.