Unfortunately, I haven't had a ton of time to test this version but in the small amount of testing I have done, I think that Art-Net might not be functioning. Unfortunately, when I tested this, I did it early on then left it running during the actual live part of the night (my fault). Things weren't working correctly (may or may not have been related to QLC+ as I had some other things going on) and I restarted running 4.6.1.
I'll try to test more soon to confirm.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
If I create a folder under scene and create a chaser, push the add sign, and by mistake select the folder under scene and click OK, then the application crashes.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm afraid this isn't working as expected.
So, again, I'm in the situation to risk to release a new version and get a rain of "extremely unstable"-like comments the day after.
I would kindly ask everyone in this thread to test everything you can, even though you don't normally use some features.
Please help.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
OK, so I'm doing some additional testing on the 4.7 Beta by setting up a new show. So in the process of setting up some scenes and EFX, I've experienced a crash when cloning a scene and a crash while editing an FX. Unfortunately, it's not something that I've been able to reproduce, but I wanted to give what feedback I have.
Update: I also experienced a time when the EFX stopped working in both operate mode and test mode until I restarted QLC+
Last edit: George Qualley 2014-02-22
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi, I hope that this time I´m in the rite chat.
I tested the git build today. And found out that the XY-pad have some problems with passing the data to the dmx output. When I move the pad position, sometime the output doesn't react immediately e.g. just jump to the final position or it does not do anything at all.
Tested with 8 and 16 bit fixtures, not tested on real fixtures just on fixture monitor with the usb to dmx adapter.
Build on Opensuse 12.x, 13.1, x32/64, QT 4.8.5 Detailed info on builds (logs) are hire: https://build.opensuse.org/package/show/home:cingulingu1/qlcplus-git
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Welcome... glade to be helpful. I hope it is nothing serious.
I know that this thread is for pre-build test versions. The point is that, there are no pre-build versions for opensuse so I made it on my own from git. That's why I posted the problem here.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Cingulingu, you know I'm picky for these kind of things, so please pardon me.
If users don't learn how and where to post in this forum, it will get a mess. Moreover the search box will display messy results when searching something precise.
If you found an issue on a GIT version, it makes sense to me to create a new post named "XY pad DMX output issue on GIT 28/02/2014"
Just my opinion, but is it that difficult ?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
No. It is not. I explain it, why I did it that way. It seems to me a good idea, not open a separated thread. It seems that I was wrong (again). Oh well.... no body died :). I will do it next time. If you want you can add my repo into test section too. So there will be a larger testers pool to spot problems like that, before the release.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I have tested the last Test Release 20140310 and the Video Playback is a great feature for me.
But, I would like to play several videos in only one window on a second screen or beamer in full size. Therefor it would be great to define one output window in full screen. Than, all video should played back in only this window. Fine would be a fade in and out. A next wish would be to change the lenght of a video on the timeline by scaling the video.
Question: Is it possible to have more than one scenes (timelines) with video?
Thanks for this great software an the new features
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Qt4, compiled from 6ea7fafa434e50bc8e41dc576bc3bf795a26b2a4
Unfortunately, I haven't had a ton of time to test this version but in the small amount of testing I have done, I think that Art-Net might not be functioning. Unfortunately, when I tested this, I did it early on then left it running during the actual live part of the night (my fault). Things weren't working correctly (may or may not have been related to QLC+ as I had some other things going on) and I restarted running 4.6.1.
I'll try to test more soon to confirm.
Tested on Windows 8.1 64bit.
If I create a folder under scene and create a chaser, push the add sign, and by mistake select the folder under scene and click OK, then the application crashes.
OK, confirmed. Thanks
I'm afraid this isn't working as expected.
So, again, I'm in the situation to risk to release a new version and get a rain of "extremely unstable"-like comments the day after.
I would kindly ask everyone in this thread to test everything you can, even though you don't normally use some features.
Please help.
OK, so I'm doing some additional testing on the 4.7 Beta by setting up a new show. So in the process of setting up some scenes and EFX, I've experienced a crash when cloning a scene and a crash while editing an FX. Unfortunately, it's not something that I've been able to reproduce, but I wanted to give what feedback I have.
Update: I also experienced a time when the EFX stopped working in both operate mode and test mode until I restarted QLC+
Last edit: George Qualley 2014-02-22
Thanks George. I know Jano made some changes on the EFX part. Maybe what you found is already solved.
Anyway, I'm gonna release version 4.7.0 as BETA in a few days and see what happens.
Hi, I hope that this time I´m in the rite chat.
I tested the git build today. And found out that the XY-pad have some problems with passing the data to the dmx output. When I move the pad position, sometime the output doesn't react immediately e.g. just jump to the final position or it does not do anything at all.
Tested with 8 and 16 bit fixtures, not tested on real fixtures just on fixture monitor with the usb to dmx adapter.
Build on Opensuse 12.x, 13.1, x32/64, QT 4.8.5 Detailed info on builds (logs) are hire: https://build.opensuse.org/package/show/home:cingulingu1/qlcplus-git
Hi, yes, you're almost in the right thread (actually this is related to 4.7.0 prebuilt test and not GIT)
I think Jano can respond on this matter
I will check it tonight.
I can reproduce, but I haven't found the problem yet. Thanks for spotting.
Fixed in git.
Great, Thanks. Working like a charm.
Welcome... glade to be helpful. I hope it is nothing serious.
I know that this thread is for pre-build test versions. The point is that, there are no pre-build versions for opensuse so I made it on my own from git. That's why I posted the problem here.
Cingulingu, you know I'm picky for these kind of things, so please pardon me.
If users don't learn how and where to post in this forum, it will get a mess. Moreover the search box will display messy results when searching something precise.
If you found an issue on a GIT version, it makes sense to me to create a new post named "XY pad DMX output issue on GIT 28/02/2014"
Just my opinion, but is it that difficult ?
No. It is not. I explain it, why I did it that way. It seems to me a good idea, not open a separated thread. It seems that I was wrong (again). Oh well.... no body died :). I will do it next time. If you want you can add my repo into test section too. So there will be a larger testers pool to spot problems like that, before the release.
Hello,
I have tested the last Test Release 20140310 and the Video Playback is a great feature for me.
But, I would like to play several videos in only one window on a second screen or beamer in full size. Therefor it would be great to define one output window in full screen. Than, all video should played back in only this window. Fine would be a fade in and out. A next wish would be to change the lenght of a video on the timeline by scaling the video.
Question: Is it possible to have more than one scenes (timelines) with video?
Thanks for this great software an the new features
Version 0310 is not even mentioned in this thread.
Please do not write random posts in the wrong places (like the one in the announcement thread)
Basically I've built version 0310 for you. At least read what I write.