[root@209 qc-usb-0.6.6]# ./quickcam.sh
-=- Logitech QuickCam USB camera driver installer -=-
Hello! I am the (hopefully) easy-to-use, fully automated
qc-usb driver installation script.
At the moment, this is experimental, and if it doesn't work,
don't hesitate to quit this with Ctrl+C and install the
driver manually.
The driver is provided in source code form, so it has to be
compiled. This should happen automatically, but it does mean
that there are some steps required before installation.
You also need to know "root" user password to test and
install the driver.
Basically you need only to keep hitting Enter whenever you
see this prompt: --->. Sometimes you're asked root password.
Pay special attention to lines beginning with [!].
It means that some trouble has been detected.
To most important location is the path to your kernel source
or headers. This can be guessed, but you can specify it by
giving it as an argument to this script like this:
./quickcam.sh LINUX_DIR=/usr/src/linux
If you haven't done it yet, now it would be a good moment to
take a look at file README.
Next I'm going to check if you have some important programs installed
and if they and the kernel are of suitable version.
Press Ctrl+C to quit, Enter to continue --->
[root@209 qc-usb-0.6.6]# ./quickcam.sh
-=- Logitech QuickCam USB camera driver installer -=-
Hello! I am the (hopefully) easy-to-use, fully automated
qc-usb driver installation script.
At the moment, this is experimental, and if it doesn't work,
don't hesitate to quit this with Ctrl+C and install the
driver manually.
The driver is provided in source code form, so it has to be
compiled. This should happen automatically, but it does mean
that there are some steps required before installation.
You also need to know "root" user password to test and
install the driver.
Basically you need only to keep hitting Enter whenever you
see this prompt: --->. Sometimes you're asked root password.
Pay special attention to lines beginning with [!].
It means that some trouble has been detected.
To most important location is the path to your kernel source
or headers. This can be guessed, but you can specify it by
giving it as an argument to this script like this:
./quickcam.sh LINUX_DIR=/usr/src/linux
If you haven't done it yet, now it would be a good moment to
take a look at file README.
Next I'm going to check if you have some important programs installed
and if they and the kernel are of suitable version.
Press Ctrl+C to quit, Enter to continue --->
/home/josito/Desktop/qc-usb-0.6.6/quickcam.sh
/usr/bin/whoami
/bin/su
/bin/ls
/bin/cat
/usr/bin/gcc
/usr/bin/gcc
/usr/bin/make
/bin/grep
/bin/egrep
/bin/awk
/bin/sed
/usr/bin/tail
/usr/bin/head
/usr/bin/install
/usr/bin/ld
/bin/uname
/usr/bin/tr
which: no xawtv in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin)
Warning: xawtv missing
/usr/X11R6/bin/xdpyinfo
/bin/dmesg
/usr/bin/wc
[!] Some important programs can not be found on default path.
Probably they aren't installed.
You should install them, for example, by using apt-get or rpm.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue --->
which: no realpath in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin)
which: no realpath in (/usr/local/bin)
/usr/bin/readlink
gcc version: gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)
gcc version: gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)
Make version: GNU Make 3.80
Linker version: GNU ld version 2.14.90.0.7 20031029
Kernel compiler: gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)
Looking for more necessary programs...
Found program /sbin/depmod
Found program /sbin/insmod
Found program /sbin/rmmod
Found program /sbin/modprobe
Found program /bin/mount
Found program /usr/sbin/lsusb
depmod version: module-init-tools 3.0
insmod version: module-init-tools version 3.0
rmmod version: module-init-tools version 3.0
modprobe version: module-init-tools version 3.0
Checking whether we're root... root
[!] Running script as root.
You shouldn't run this script as root. It should work,
but is unsafe. Please run this as an ordinary user.
When root access is really needed, you will be prompted
for the root password.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue --->
Checking for driver source code...
Checking for write permission...
Previous round done. Now checking if you have kernel source installed.
Press Ctrl+C to quit, Enter to continue --->
awk: línea ord.:2: fatal: no se puede abrir el fichero `/lib/modules/2.6.3-7mdk/build/include/linux/version.h' para lectura (No such file or directory)
/bin/sh: line 1: [: -ge: unary operator expected
/bin/sh: line 1: [: -ge: unary operator expected
Kernel source directory: /lib/modules/2.6.3-7mdk/build
[!] Can not find kernel source or even headers.
Make sure that they are installed (install with e.g. rpm or apt-get
if necessary) and ensure that you have read rights to the files.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
[root@209 qc-usb-0.6.6]# ./quickcam.sh
-=- Logitech QuickCam USB camera driver installer -=-
Hello! I am the (hopefully) easy-to-use, fully automated
qc-usb driver installation script.
At the moment, this is experimental, and if it doesn't work,
don't hesitate to quit this with Ctrl+C and install the
driver manually.
The driver is provided in source code form, so it has to be
compiled. This should happen automatically, but it does mean
that there are some steps required before installation.
You also need to know "root" user password to test and
install the driver.
Basically you need only to keep hitting Enter whenever you
see this prompt: --->. Sometimes you're asked root password.
Pay special attention to lines beginning with [!].
It means that some trouble has been detected.
To most important location is the path to your kernel source
or headers. This can be guessed, but you can specify it by
giving it as an argument to this script like this:
./quickcam.sh LINUX_DIR=/usr/src/linux
If you haven't done it yet, now it would be a good moment to
take a look at file README.
Next I'm going to check if you have some important programs installed
and if they and the kernel are of suitable version.
Press Ctrl+C to quit, Enter to continue --->
[root@209 qc-usb-0.6.6]# ./quickcam.sh
-=- Logitech QuickCam USB camera driver installer -=-
Hello! I am the (hopefully) easy-to-use, fully automated
qc-usb driver installation script.
At the moment, this is experimental, and if it doesn't work,
don't hesitate to quit this with Ctrl+C and install the
driver manually.
The driver is provided in source code form, so it has to be
compiled. This should happen automatically, but it does mean
that there are some steps required before installation.
You also need to know "root" user password to test and
install the driver.
Basically you need only to keep hitting Enter whenever you
see this prompt: --->. Sometimes you're asked root password.
Pay special attention to lines beginning with [!].
It means that some trouble has been detected.
To most important location is the path to your kernel source
or headers. This can be guessed, but you can specify it by
giving it as an argument to this script like this:
./quickcam.sh LINUX_DIR=/usr/src/linux
If you haven't done it yet, now it would be a good moment to
take a look at file README.
Next I'm going to check if you have some important programs installed
and if they and the kernel are of suitable version.
Press Ctrl+C to quit, Enter to continue --->
/home/josito/Desktop/qc-usb-0.6.6/quickcam.sh
/usr/bin/whoami
/bin/su
/bin/ls
/bin/cat
/usr/bin/gcc
/usr/bin/gcc
/usr/bin/make
/bin/grep
/bin/egrep
/bin/awk
/bin/sed
/usr/bin/tail
/usr/bin/head
/usr/bin/install
/usr/bin/ld
/bin/uname
/usr/bin/tr
which: no xawtv in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin)
Warning: xawtv missing
/usr/X11R6/bin/xdpyinfo
/bin/dmesg
/usr/bin/wc
[!] Some important programs can not be found on default path.
Probably they aren't installed.
You should install them, for example, by using apt-get or rpm.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue --->
which: no realpath in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin)
which: no realpath in (/usr/local/bin)
/usr/bin/readlink
gcc version: gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)
gcc version: gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)
Make version: GNU Make 3.80
Linker version: GNU ld version 2.14.90.0.7 20031029
Kernel compiler: gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)
Looking for more necessary programs...
Found program /sbin/depmod
Found program /sbin/insmod
Found program /sbin/rmmod
Found program /sbin/modprobe
Found program /bin/mount
Found program /usr/sbin/lsusb
depmod version: module-init-tools 3.0
insmod version: module-init-tools version 3.0
rmmod version: module-init-tools version 3.0
modprobe version: module-init-tools version 3.0
Checking whether we're root... root
[!] Running script as root.
You shouldn't run this script as root. It should work,
but is unsafe. Please run this as an ordinary user.
When root access is really needed, you will be prompted
for the root password.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue --->
Checking for driver source code...
Checking for write permission...
Previous round done. Now checking if you have kernel source installed.
Press Ctrl+C to quit, Enter to continue --->
awk: línea ord.:2: fatal: no se puede abrir el fichero `/lib/modules/2.6.3-7mdk/build/include/linux/version.h' para lectura (No such file or directory)
/bin/sh: line 1: [: -ge: unary operator expected
/bin/sh: line 1: [: -ge: unary operator expected
Kernel source directory: /lib/modules/2.6.3-7mdk/build
[!] Can not find kernel source or even headers.
Make sure that they are installed (install with e.g. rpm or apt-get
if necessary) and ensure that you have read rights to the files.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.