Menu
▾
▴
Re: [project-open-development] Why Project is not created
|
From: Malte S. <mal...@co...> - 2011-06-28 11:00:11
|
Hey,
just add the following then to your postgresql.conf
#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------
# - Previous PostgreSQL Versions -
add_missing_from = on
#array_nulls = on
#backslash_quote = safe_encoding # on, off, or safe_encoding
default_with_oids = on
#escape_string_warning = on
regex_flavor = extended # advanced, extended, or basic
#sql_inheritance = on
#standard_conforming_strings = off
#synchronize_seqscans = on
# - Other Platforms and Clients -
#transform_null_equals = off
Best wishes
Malte
Am 28.06.2011 um 12:56 schrieb Adarsh Sharma:
> Thanks Malte,
>
> When I was installing Project open, I found the below things :
>
> 1. I install Postgresql from PostgresPlus-8.4.2-linux.bin file which includes all in one.
>
> I know I have to change the 3 parameters ( add_missing_from, default_with_oids and set the regex_flavor ) but I found only one parameter in my postgresql.conf.
>
> I also attached the file.
>
> U r suggesting me to uninstall and reinstall postgres frm u'r way. Am i right. Is it not possible to add these parameters in postgresql.conf
>
>
> Thanks
>
>
> Malte Sussdorff wrote:
>> You need to manually configure postgres as ]project-open[ and OpenACS did not yet change old coding habits. This will happen with OpenACS 5.7 and ]project-open[ 4.x, I presume.
>>
>> # Also edit the configuration to allow add_missing_from, default_with_oids and set the regex_flavor to extended
>>
>> sudo emacs /etc/postgresql/8.4/main/postgresql.conf
>> sudo /etc/init.d/postgresql-8.4 reload
>>
>> Best wishes
>> Malte
>>
>>
>> Am 28.06.2011 um 12:36 schrieb Adarsh Sharma:
>>
>>
>
> # -----------------------------
> # PostgreSQL configuration file
> # -----------------------------
> #
> # This file consists of lines of the form:
> #
> # name = value
> #
> # (The "=" is optional.) Whitespace may be used. Comments are introduced with
> # "#" anywhere on a line. The complete list of parameter names and allowed
> # values can be found in the PostgreSQL documentation.
> #
> # The commented-out settings shown in this file represent the default values.
> # Re-commenting a setting is NOT sufficient to revert it to the default value;
> # you need to reload the server.
> #
> # This file is read on server startup and when the server receives a SIGHUP
> # signal. If you edit the file on a running system, you have to SIGHUP the
> # server for the changes to take effect, or use "pg_ctl reload". Some
> # parameters, which are marked below, require a server shutdown and restart to
> # take effect.
> #
> # Any parameter can also be given as a command-line option to the server, e.g.,
> # "postgres -c log_connections=on". Some parameters can be changed at run time
> # with the "SET" SQL command.
> #
> # Memory units: kB = kilobytes Time units: ms = milliseconds
> # MB = megabytes s = seconds
> # GB = gigabytes min = minutes
> # h = hours
> # d = days
>
>
> #------------------------------------------------------------------------------
> # FILE LOCATIONS
> #------------------------------------------------------------------------------
>
> # The default values of these variables are driven from the -D command-line
> # option or PGDATA environment variable, represented here as ConfigDir.
>
> #data_directory = 'ConfigDir' # use data in another directory
> # (change requires restart)
> #hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
> # (change requires restart)
> #ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
> # (change requires restart)
>
> # If external_pid_file is not explicitly set, no extra PID file is written.
> #external_pid_file = '(none)' # write an extra PID file
> # (change requires restart)
>
>
> #------------------------------------------------------------------------------
> # CONNECTIONS AND AUTHENTICATION
> #------------------------------------------------------------------------------
>
> # - Connection Settings -
>
> listen_addresses = '*' # what IP address(es) to listen on;
> # comma-separated list of addresses;
> # defaults to 'localhost', '*' = all
> # (change requires restart)
> port = 5432 # (change requires restart)
> #max_connections = 100 # (change requires restart)
> max_connections = 100 # (change requires restart)
> # Note: Increasing max_connections costs ~400 bytes of shared memory per
> # connection slot, plus lock space (see max_locks_per_transaction).
> #superuser_reserved_connections = 3 # (change requires restart)
> #unix_socket_directory = '' # (change requires restart)
> #unix_socket_group = '' # (change requires restart)
> #unix_socket_permissions = 0777 # begin with 0 to use octal notation
> # (change requires restart)
> #bonjour = off # advertise server via Bonjour
> # (change requires restart)
> #bonjour_name = '' # defaults to the computer name
> # (change requires restart)
>
> # - Security and Authentication -
>
> #authentication_timeout = 1min # 1s-600s
> #ssl = off # (change requires restart)
> #ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH' # allowed SSL ciphers
> # (change requires restart)
> #ssl_renegotiation_limit = 512MB # amount of data between renegotiations
> #password_encryption = on
> #db_user_namespace = off
>
> # Kerberos and GSSAPI
> #krb_server_keyfile = ''
> #krb_srvname = 'postgres' # (Kerberos only)
> #krb_caseins_users = off
>
> # - TCP Keepalives -
> # see "man 7 tcp" for details
>
> #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
> # 0 selects the system default
> #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
> # 0 selects the system default
> #tcp_keepalives_count = 0 # TCP_KEEPCNT;
> # 0 selects the system default
>
>
> #------------------------------------------------------------------------------
> # RESOURCE USAGE (except WAL)
> #------------------------------------------------------------------------------
>
> # - Memory -
>
> #shared_buffers = 32MB # min 128kB
> shared_buffers = 512MB # min 128kB or max_connections*16kB
> # (change requires restart)
> #temp_buffers = 8MB # min 800kB
> #max_prepared_transactions = 0 # zero disables the feature
> # (change requires restart)
> # Note: Increasing max_prepared_transactions costs ~600 bytes of shared memory
> # per transaction slot, plus lock space (see max_locks_per_transaction).
> # It is not advisable to set max_prepared_transactions nonzero unless you
> # actively intend to use prepared transactions.
> #work_mem = 1MB # min 64kB
> work_mem = 32MB # min 64kB
> #maintenance_work_mem = 16MB # min 1MB
> maintenance_work_mem = 16MB # min 1MB
> #max_stack_depth = 2MB # min 100kB
>
> # - Kernel Resource Usage -
>
> #max_files_per_process = 1000 # min 25
> # (change requires restart)
> #shared_preload_libraries = '' # (change requires restart)
>
> # - Cost-Based Vacuum Delay -
>
> #vacuum_cost_delay = 0ms # 0-100 milliseconds
> #vacuum_cost_page_hit = 1 # 0-10000 credits
> #vacuum_cost_page_miss = 10 # 0-10000 credits
> #vacuum_cost_page_dirty = 20 # 0-10000 credits
> #vacuum_cost_limit = 200 # 1-10000 credits
>
> # - Background Writer -
>
> #bgwriter_delay = 200ms # 10-10000ms between rounds
> #bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round
> #bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on buffers scanned/round
>
> # - Asynchronous Behavior -
>
> #effective_io_concurrency = 1 # 1-1000. 0 disables prefetching
>
>
> #------------------------------------------------------------------------------
> # WRITE AHEAD LOG
> #------------------------------------------------------------------------------
>
> # - Settings -
>
> #wal_level = minimal # minimal, archive, or hot_standby
> # (change requires restart)
> #fsync = on # turns forced synchronization on or off
> #synchronous_commit = on # immediate fsync at commit
> #wal_sync_method = fsync # the default is the first option
> # supported by the operating system:
> # open_datasync
> # fdatasync (default on Linux)
> # fsync
> # fsync_writethrough
> # open_sync
> #full_page_writes = on # recover from partial page writes
> #wal_buffers = 64kB # min 32kB
> #wal_buffers = 384 # min 32kB
> # (change requires restart)
> #wal_writer_delay = 200ms # 1-10000 milliseconds
>
> #commit_delay = 0 # range 0-100000, in microseconds
> #commit_siblings = 5 # range 1-1000
>
> # - Checkpoints -
>
> #checkpoint_segments = 3 # in logfile segments, min 1, 16MB each
> checkpoint_segments = 64 # in logfile segments, min 1, 16MB each
> #checkpoint_timeout = 5min # range 30s-1h
> #checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
> #checkpoint_warning = 30s # 0 disables
>
> # - Archiving -
>
> #archive_mode = off # allows archiving to be done
> # (change requires restart)
> #archive_command = '' # command to use to archive a logfile segment
> #archive_timeout = 0 # force a logfile segment switch after this
> # number of seconds; 0 disables
>
> # - Streaming Replication -
>
> #max_wal_senders = 0 # max number of walsender processes
> # (change requires restart)
> #wal_sender_delay = 200ms # walsender cycle time, 1-10000 milliseconds
> #wal_keep_segments = 0 # in logfile segments, 16MB each; 0 disables
> #vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
>
> # - Standby Servers -
>
> #hot_standby = off # "on" allows queries during recovery
> # (change requires restart)
> #max_standby_archive_delay = 30s # max delay before canceling queries
> # when reading WAL from archive;
> # -1 allows indefinite delay
> #max_standby_streaming_delay = 30s # max delay before canceling queries
> # when reading streaming WAL;
> # -1 allows indefinite delay
>
>
> #------------------------------------------------------------------------------
> # QUERY TUNING
> #------------------------------------------------------------------------------
>
> # - Planner Method Configuration -
>
> #enable_bitmapscan = on
> #enable_hashagg = on
> #enable_hashjoin = on
> #enable_indexscan = on
> #enable_material = on
> #enable_mergejoin = on
> #enable_nestloop = on
> #enable_seqscan = on
> #enable_sort = on
> #enable_tidscan = on
>
> # - Planner Cost Constants -
>
> #seq_page_cost = 1.0 # measured on an arbitrary scale
> #random_page_cost = 4.0 # same scale as above
> random_page_cost = 2.0 # same scale as above
> #cpu_tuple_cost = 0.01 # same scale as above
> #cpu_index_tuple_cost = 0.005 # same scale as above
> #cpu_operator_cost = 0.0025 # same scale as above
> #effective_cache_size = 128MB
> effective_cache_size = 4096MB
>
> # - Genetic Query Optimizer -
>
> #geqo = on
> #geqo_threshold = 12
> #geqo_effort = 5 # range 1-10
> #geqo_pool_size = 0 # selects default based on effort
> #geqo_generations = 0 # selects default based on effort
> #geqo_selection_bias = 2.0 # range 1.5-2.0
> #geqo_seed = 0.0 # range 0.0-1.0
>
> # - Other Planner Options -
>
> #default_statistics_target = 100 # range 1-10000
> #constraint_exclusion = partition # on, off, or partition
> #cursor_tuple_fraction = 0.1 # range 0.0-1.0
> #from_collapse_limit = 8
> #join_collapse_limit = 8 # 1 disables collapsing of explicit
> # JOIN clauses
>
>
> #------------------------------------------------------------------------------
> # ERROR REPORTING AND LOGGING
> #------------------------------------------------------------------------------
>
> # - Where to Log -
>
> log_destination = 'stderr' # Valid values are combinations of
> # stderr, csvlog, syslog, and eventlog,
> # depending on platform. csvlog
> # requires logging_collector to be on.
>
> # This is used when logging to stderr:
> logging_collector = on # Enable capturing of stderr and csvlog
> # into log files. Required to be on for
> # csvlogs.
> # (change requires restart)
>
> # These are only used if logging_collector is on:
> #log_directory = 'pg_log' # directory where log files are written,
> # can be absolute or relative to PGDATA
> #log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
> # can include strftime() escapes
> #log_truncate_on_rotation = off # If on, an existing log file of the
> # same name as the new log file will be
> # truncated rather than appended to.
> # But such truncation only occurs on
> # time-driven rotation, not on restarts
> # or size-driven rotation. Default is
> # off, meaning append to existing files
> # in all cases.
> #log_rotation_age = 1d # Automatic rotation of logfiles will
> # happen after that time. 0 disables.
> #log_rotation_size = 10MB # Automatic rotation of logfiles will
> # happen after that much log output.
> # 0 disables.
>
> # These are relevant when logging to syslog:
> #syslog_facility = 'LOCAL0'
> #syslog_ident = 'postgres'
>
> #silent_mode = off # Run server silently.
> # DO NOT USE without syslog or
> # logging_collector
> # (change requires restart)
>
>
> # - When to Log -
>
> #client_min_messages = notice # values in order of decreasing detail:
> # debug5
> # debug4
> # debug3
> # debug2
> # debug1
> # log
> # notice
> # warning
> # error
>
> #log_min_messages = warning # values in order of decreasing detail:
> # debug5
> # debug4
> # debug3
> # debug2
> # debug1
> # info
> # notice
> # warning
> # error
> # log
> # fatal
> # panic
>
> #log_min_error_statement = error # values in order of decreasing detail:
> # debug5
> # debug4
> # debug3
> # debug2
> # debug1
> # info
> # notice
> # warning
> # error
> # log
> # fatal
> # panic (effectively off)
>
> #log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
> # and their durations, > 0 logs only
> # statements running at least this number
> # of milliseconds
>
>
> # - What to Log -
>
> #debug_print_parse = off
> #debug_print_rewritten = off
> #debug_print_plan = off
> #debug_pretty_print = on
> #log_checkpoints = off
> #log_connections = off
> #log_disconnections = off
> #log_duration = off
> #log_error_verbosity = default # terse, default, or verbose messages
> #log_hostname = off
> log_line_prefix = '%t ' # special values:
> # %a = application name
> # %u = user name
> # %d = database name
> # %r = remote host and port
> # %h = remote host
> # %p = process ID
> # %t = timestamp without milliseconds
> # %m = timestamp with milliseconds
> # %i = command tag
> # %e = SQL state
> # %c = session ID
> # %l = session line number
> # %s = session start timestamp
> # %v = virtual transaction ID
> # %x = transaction ID (0 if none)
> # %q = stop here in non-session
> # processes
> # %% = '%'
> # e.g. '<%u%%%d> '
> #log_lock_waits = off # log lock waits >= deadlock_timeout
> #log_statement = 'none' # none, ddl, mod, all
> #log_temp_files = -1 # log temporary files equal or larger
> # than the specified size in kilobytes;
> # -1 disables, 0 logs all temp files
> #log_timezone = unknown # actually, defaults to TZ environment
> # setting
>
>
> #------------------------------------------------------------------------------
> # RUNTIME STATISTICS
> #------------------------------------------------------------------------------
>
> # - Query/Index Statistics Collector -
>
> #track_activities = on
> #track_counts = on
> #track_functions = none # none, pl, all
> #track_activity_query_size = 1024 # (change requires restart)
> #update_process_title = on
> #stats_temp_directory = 'pg_stat_tmp'
>
>
> # - Statistics Monitoring -
>
> #log_parser_stats = off
> #log_planner_stats = off
> #log_executor_stats = off
> #log_statement_stats = off
>
>
> #------------------------------------------------------------------------------
> # AUTOVACUUM PARAMETERS
> #------------------------------------------------------------------------------
>
> #autovacuum = on # Enable autovacuum subprocess? 'on'
> autovacuum = true # Enable autovacuum subprocess? 'on'
> # requires track_counts to also be on.
> #log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
> # their durations, > 0 logs only
> # actions running at least this number
> # of milliseconds.
> #autovacuum_max_workers = 3 # max number of autovacuum subprocesses
> # (change requires restart)
> #autovacuum_naptime = 1min # time between autovacuum runs
> autovacuum_naptime = 60 # time between autovacuum runs
> #autovacuum_vacuum_threshold = 50 # min number of row updates before
> autovacuum_vacuum_threshold = 1000 # min number of row updates before
> # vacuum
> #autovacuum_analyze_threshold = 50 # min number of row updates before
> autovacuum_analyze_threshold = 250 # min number of row updates before
> # analyze
> #autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
> autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
> #autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
> autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
> #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
> # (change requires restart)
> #autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for
> # autovacuum, in milliseconds;
> # -1 means use vacuum_cost_delay
> #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
> # autovacuum, -1 means use
> # vacuum_cost_limit
>
>
> #------------------------------------------------------------------------------
> # CLIENT CONNECTION DEFAULTS
> #------------------------------------------------------------------------------
>
> # - Statement Behavior -
>
> #search_path = '"$user",public' # schema names
> #default_tablespace = '' # a tablespace name, '' uses the default
> #temp_tablespaces = '' # a list of tablespace names, '' uses
> # only default tablespace
> #check_function_bodies = on
> #default_transaction_isolation = 'read committed'
> #default_transaction_read_only = off
> #session_replication_role = 'origin'
> #statement_timeout = 0 # in milliseconds, 0 is disabled
> #vacuum_freeze_min_age = 50000000
> #vacuum_freeze_table_age = 150000000
> #bytea_output = 'hex' # hex, escape
> #xmlbinary = 'base64'
> #xmloption = 'content'
>
> # - Locale and Formatting -
>
> datestyle = 'iso, mdy'
> #intervalstyle = 'postgres'
> #timezone = unknown # actually, defaults to TZ environment
> # setting
> #timezone_abbreviations = 'Default' # Select the set of available time zone
> # abbreviations. Currently, there are
> # Default
> # Australia
> # India
> # You can create your own file in
> # share/timezonesets/.
> #extra_float_digits = 0 # min -15, max 3
> #client_encoding = sql_ascii # actually, defaults to database
> # encoding
>
> # These settings are initialized by initdb, but they can be changed.
> lc_messages = 'en_US.UTF-8' # locale for system error message
> # strings
> lc_monetary = 'en_US.UTF-8' # locale for monetary formatting
> lc_numeric = 'en_US.UTF-8' # locale for number formatting
> lc_time = 'en_US.UTF-8' # locale for time formatting
>
> # default configuration for text search
> default_text_search_config = 'pg_catalog.english'
>
> # - Other Defaults -
>
> #dynamic_library_path = '$libdir'
> #local_preload_libraries = ''
>
>
> #------------------------------------------------------------------------------
> # LOCK MANAGEMENT
> #------------------------------------------------------------------------------
>
> #deadlock_timeout = 1s
> #max_locks_per_transaction = 64 # min 10
> # (change requires restart)
> # Note: Each lock table slot uses ~270 bytes of shared memory, and there are
> # max_locks_per_transaction * (max_connections + max_prepared_transactions)
> # lock table slots.
>
>
> #------------------------------------------------------------------------------
> # VERSION/PLATFORM COMPATIBILITY
> #------------------------------------------------------------------------------
>
> # - Previous PostgreSQL Versions -
>
> #array_nulls = on
> #backslash_quote = safe_encoding # on, off, or safe_encoding
> default_with_oids = off
> #escape_string_warning = on
> #lo_compat_privileges = off
> #sql_inheritance = on
> #standard_conforming_strings = off
> #synchronize_seqscans = on
>
> # - Other Platforms and Clients -
>
> #transform_null_equals = off
>
>
> #------------------------------------------------------------------------------
> # CUSTOMIZED OPTIONS
> #------------------------------------------------------------------------------
>
> #custom_variable_classes = '' # list of custom variable class names
--
Malte Sussdorff
cognovís GmbH
Schrödersweg 27
D-22453 Hamburg
Mobil: +49 (0)151 / 230 33 826
Fon: +49 (0)40 / 386 60 521
Fax: +49 (0)40 / 386 60 523
www.cognovis.de
HRB Hamburg 28909
Geschäftsführer: Malte Sussdorff
Diese Nachricht ist streng vertraulich und enthält rechtlich geschützte Informationen. Sie ist nur für die Adressaten bestimmt. Falls Sie diese Mail fälschlicherweise erhalten haben, bitten wir Sie freundlicherweise uns umgehend telefonisch oder per E-Mail zu informieren und den Inhalt dieser Nachricht in Ihrem System zu löschen. Diese Nachricht ist anfällig für Datenkorruption, Abfangen von Daten, nicht autorisierte Änderungen, Verfälschung und Viren. Wir senden und empfangen E-Mails nur auf der Grundlage, dass wir nicht für solche Datenkorruption, Abfangen von Daten, nicht autorisierte Änderungen, Verfälschung und Viren und deren Konsequenzen haften.
This e-mail is confidential and may contain legally privileged information. It is intended only for the addressees. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message from your system. E-Mail is susceptible to data corruption, interception, unauthorised amendment, tampering and viruses, and we only send and receive e-mails on the basis that we are not liable for any such corruption, interception, unauthorised amendment, tampering and viruses or any consequences thereof.
|
