[Pollpod-checkins] pollpod/docs README,1.1,1.2

[Chilts <and...@us...>]

Update of /cvsroot/pollpod/pollpod/docs
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv13738/pollpod/docs

Modified Files:
	README 
Log Message:
- README changes (from old sample.ini)


Index: README
===================================================================
RCS file: /cvsroot/pollpod/pollpod/docs/README,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -d -r1.1 -r1.2
--- README	6 May 2005 13:57:38 -0000	1.1
+++ README	18 Jul 2005 09:03:06 -0000	1.2
@@ -0,0 +1,123 @@
+
+
+# -----------------------------------------------------------------------------
+
+# This first section defines the default values for this installation of
+# pollpod.pl. These values are read first, then your own configuration file,
+# then any configuration file you choose to mention on the command line, then
+# finally, any command line option you require.
+
+# See /etc/pollpod.ini for a more compact version.
+
+# Note on yes/no options. Usually, the default value is a no, but can be set to
+# 'yes' if required. The option is turned on only if the value is 'yes' and it
+# is all lowercase. Anything else (including 'YES', 'y', 'ON', 'True' or
+# 'DoIt'), will be seen as 'no'.
+
+[Options]
+
+# This is the main directory where your feeds will be saved. Each feed will be
+# saved into it's own directory, the name of which is the name before the comma
+# in each of [Feeds]Feed lines.
+
+PodCastSaveDir=~/podcasts
+
+# If this option is set to 'yes', then pollpod.pl will attempt to only download
+# the latest podcast in each feed. In this circumstance, the latest podcast is
+# the one nearest the top of the file.
+
+SaveLatestOnly=no
+
+# If this option is set to 'yes', pollpod.pl will run pretty much as it should,
+# except that just before trying to download each podcast, it will internally
+# mark each one as done, hence when downloading is attempted, each podcast will
+# be skipped.
+
+TestOnly=no
+
+# If this option is set to 'yes', then each podcast that is encountered will be
+# marked as 'done'. This is achieved by 'touching' a file in the feed's
+# directory which is the name of the file appended with a '.done'. E.g. for a
+# file of the name '20050509_AShow.mp3', the file '20050509_AShow.mp3.done'
+# will be created so that show won't try and be downloaded again. If you
+# require to download that show in the future, just delete the '*.done' files
+# you don't equire and re-run pollpod.pl with this option not set to 'yes'.
+
+CatchUpAll=no 
+
+# This option means that pollpod.pl will try and create any directories it
+# requires, including the PodCastSaveDir, any feed's directory and the DateDir.
+
+MakeDirs=no
+
+# This option allows you to save the podcasts with a filename taken from the
+# feed. This will either be the name of the file taken from the last part of
+# the URL (from the last /), or the title of the podcast taken from the title
+# element in the enclosure.
+#    Valid values are 'url' or 'title'.
+# If you are unsure of this, leave it as 'url'.
+
+FieldForFilename=url
+
+# This option tries to replace both spaces and /'s in any filename with an
+# underscore. It is usually only useful if you have set the FieldForFilename
+# option to 'title'. If you don't know anything about this, leave the
+# FieldForFilename set to 'url' and NormaliseFilenames to 'no' and you should
+# be fine.
+
+NormaliseFilenames=no
+
+# Again, this option is usually only useful when you wish to use the
+# FieldForFilename set to 'title'. You can safely leave this as 'no' if you
+# have the above set to 'url'.
+
+PrecedeFilenamesWithDate=no
+
+# If you require create a dated directory containing links to all of the most
+# recently downloaded podcasts, set this option to 'yes' and be sure to set
+# DateDir too.
+
+MakeDateLinks=no
+
+# This directory is the one in which dated directories will be created which
+# will contain symbolic links to each of the latest podcasts that have been
+# downloaded.
+
+DateDir=~/podcasts/dates
+
+# If you require an M3U playlist file of all the latest downloaded podcasts,
+# set this option to 'yes'.
+
+CreateM3UPlayList=no
+
+# This specifies the file to save the playlist too if the above option is
+# 'yes'.
+
+M3UPlayListFile=~/podcasts/podcasts.m3u
+
+# These final two options are for the curious rather than the normal user.
+# This says whether to save the RSS XML feed. It is saved into each feed's
+# directory. It is saved as 'feed.xml'.
+
+SaveRssXmlFeeds=no
+
+# This says whether to save the RSS XML feed as a dump of the Perl data
+# structure. The files is saved into each feed's directory. Note: this is
+# really only for people interested in developing something, learning a bit
+# about Perl, or just the generally inquisitive person. The file is saved as
+# 'feed.dmp'.
+
+DumpParsedXml=no
+
+# -----------------------------------------------------------------------------
+
+# This final section is only an example which you may copy. Obviously, you need
+# to uncomment the [Feeds] line, then uncomment any feed you like, or add your
+# own.
+
+# [Feeds]
+# Feed=NASA,http://science.nasa.gov/podcast.xml
+# Feed=Brainwagon,http://brainwagon.org/feed/
+# Feed=InOurTime,http://www.bbc.co.uk/radio4/history/inourtime/mp3/podcast.xml
+
+# -----------------------------------------------------------------------------