Menu
▾
▴
[Plplot-devel] Problems in tcl/tk driver on Solaris platform.
|
From: Piyush L. <pi...@da...> - 2003-02-07 10:02:28
|
bash-2.03$ ./configure --disable-dyndrivers --disable-tek4010f =
--disable-conex --disable-vlt --disable-versaterm --disable-mskermit =
--disable-tek4107 --disable-tek4010 --disable-xterm --disable-pstex =
--disable-psc --disable-pbm --disable-ntk --disable-ljiip --disable-ljii =
--disable-linuxvga --disable-imp --enable-jpeg --disable-lj_hpgl =
--disable-hp7580 --disable-hp7470 --disable-gnome --disable-png =
--disable-cgm --disable-dg300 --disable-xfig --disable-ljii =
--disable-gtktest --disable-pyton --disable-f77 --enable-itcl =
--enable-java --enable-tcl --enable-tk --disable-cxx --disable-octave=0A=
No defaults file found, performing full configure.=0A=
No defaults file found, performing full configure.=0A=
checking for a BSD-compatible install... ./install-sh -c=0A=
checking whether build environment is sane... yes=0A=
checking for gawk... no=0A=
checking for mawk... no=0A=
checking for nawk... nawk=0A=
checking whether make sets $(MAKE)... yes=0A=
checking for style of include used by make... GNU=0A=
checking for gcc... gcc=0A=
checking for C compiler default output... a.out=0A=
checking whether the C compiler works... yes=0A=
checking whether we are cross compiling... no=0A=
checking for suffix of executables... =0A=
checking for suffix of object files... o=0A=
checking whether we are using the GNU C compiler... yes=0A=
checking whether gcc accepts -g... yes=0A=
checking for gcc option to accept ANSI C... none needed=0A=
checking dependency style of gcc... gcc3=0A=
checking for gcc option to accept ANSI C... none needed=0A=
checking build system type... sparc-sun-solaris2.8=0A=
checking host system type... sparc-sun-solaris2.8=0A=
checking for ld used by GCC... /usr/local/sparc-sun-solaris2.8/bin/ld=0A=
checking if the linker (/usr/local/sparc-sun-solaris2.8/bin/ld) is GNU =
ld... yes=0A=
checking for /usr/local/sparc-sun-solaris2.8/bin/ld option to reload =
object files... -r=0A=
checking for BSD-compatible nm... /usr/local/bin/nm -B=0A=
checking for a sed that does not truncate output... /usr/xpg4/bin/sed=0A=
checking whether ln -s works... yes=0A=
checking how to recognise dependent libraries... pass_all=0A=
checking command to parse /usr/local/bin/nm -B output... ok=0A=
checking how to run the C preprocessor... gcc -E=0A=
checking for egrep... egrep=0A=
checking for ANSI C header files... yes=0A=
checking for sys/types.h... yes=0A=
checking for sys/stat.h... yes=0A=
checking for stdlib.h... yes=0A=
checking for string.h... yes=0A=
checking for memory.h... yes=0A=
checking for strings.h... yes=0A=
checking for inttypes.h... yes=0A=
checking for stdint.h... no=0A=
checking for unistd.h... yes=0A=
checking dlfcn.h usability... yes=0A=
checking dlfcn.h presence... yes=0A=
checking for dlfcn.h... yes=0A=
checking for ranlib... ranlib=0A=
checking for strip... strip=0A=
checking for objdir... .libs=0A=
checking for gcc option to produce PIC... -fPIC=0A=
checking if gcc PIC flag -fPIC works... yes=0A=
checking if gcc static flag -static works... yes=0A=
checking if gcc supports -c -o file.o... yes=0A=
checking if gcc supports -c -o file.lo... yes=0A=
checking if gcc supports -fno-rtti -fno-exceptions... yes=0A=
checking whether the linker (/usr/local/sparc-sun-solaris2.8/bin/ld) =
supports shared libraries... yes=0A=
checking how to hardcode library paths into programs... immediate=0A=
checking whether stripping libraries is possible... yes=0A=
checking dynamic linker characteristics... solaris2.8 ld.so=0A=
checking if libtool supports shared libraries... yes=0A=
checking whether to build shared libraries... yes=0A=
checking whether to build static libraries... yes=0A=
checking whether -lc should be explicitly linked in... yes=0A=
creating libtool=0A=
checking for X... libraries , headers =0A=
checking for main in -lX11... yes=0A=
"Uhhh." =0A=
warning: Java Native Interface include file not found=0A=
checking for main in -lgd... yes=0A=
checking for main in -lpng... no=0A=
but found in /usr/lib=0A=
checking for main in -ljpeg... yes=0A=
checking for main in -lz... yes=0A=
checking for png support in libgd... no: png driver disabled=0A=
checking for jpeg support in libgd... no: jpeg driver disabled=0A=
checking for libtcl... /usr/ActiveTcl/lib/libtcl8.4.so=0A=
checking itclDecls.h usability... no=0A=
checking itclDecls.h presence... yes=0A=
configure: WARNING: itclDecls.h: present but cannot be compiled=0A=
configure: WARNING: itclDecls.h: check for missing prerequisite headers?=0A=
configure: WARNING: itclDecls.h: proceeding with the preprocessor's =
result=0A=
configure: WARNING: ## ------------------------------------ ##=0A=
configure: WARNING: ## Report this to bug...@gn.... ##=0A=
configure: WARNING: ## ------------------------------------ ##=0A=
checking for itclDecls.h... yes=0A=
checking for libitcl... =0A=
/usr/ActiveTcl/lib/itcl3.2/libitcl3.2.so=0A=
/usr/ActiveTcl/lib/itcl3.2=0A=
yes /usr/ActiveTcl/include=0A=
checking for tkInt.h... /usr/ActiveTcl/include/tkInt.h=0A=
/usr/ActiveTcl/include=0A=
checking for tclInt.h... /usr/ActiveTcl/include/tclInt.h=0A=
checking for libtk... /usr/ActiveTcl/lib/libtk8.4.so=0A=
checking for libitk... /usr/ActiveTcl/lib/itk3.2/libitk3.2.so=0A=
checking for Python.h... no=0A=
warning: can't find Python.h, setting enable_python to no=0A=
checking for g++... g++=0A=
checking whether we are using the GNU C++ compiler... yes=0A=
checking whether g++ accepts -g... yes=0A=
checking dependency style of g++... gcc3=0A=
checking for ANSI C header files... (cached) yes=0A=
checking for unistd.h... (cached) yes=0A=
checking termios.h usability... yes=0A=
checking termios.h presence... yes=0A=
checking for termios.h... yes=0A=
checking for sys/wait.h that is POSIX.1 compatible... yes=0A=
checking for caddr_t... yes=0A=
checking for pid_t... yes=0A=
checking for unistd.h... (cached) yes=0A=
checking vfork.h usability... no=0A=
checking vfork.h presence... no=0A=
checking for vfork.h... no=0A=
checking for fork... yes=0A=
checking for vfork... yes=0A=
checking for working fork... yes=0A=
checking for working vfork... (cached) yes=0A=
checking for popen... yes=0A=
checking for usleep... yes=0A=
checking for isinf... no=0A=
checking for finite... yes=0A=
checking for gethostbyname... no=0A=
checking for gethostbyname in -lnsl... yes=0A=
checking for connect... no=0A=
checking for connect in -lsocket... yes=0A=
checking for remove... yes=0A=
checking for shmat... yes=0A=
checking for IceConnectionNumber in -lICE... yes=0A=
checking for dynamic drivers... =0A=
configure: creating ./config.status=0A=
config.status: creating Makefile=0A=
config.status: creating src/Makefile=0A=
config.status: creating include/Makefile=0A=
config.status: creating lib/Makefile=0A=
config.status: creating bindings/Makefile=0A=
config.status: creating bindings/c++/Makefile=0A=
config.status: creating bindings/f77/Makefile=0A=
config.status: creating bindings/python/Makefile=0A=
config.status: creating bindings/tcl/Makefile=0A=
config.status: creating bindings/tk/Makefile=0A=
config.status: creating bindings/octave/Makefile=0A=
config.status: creating bindings/octave/PLplot/Makefile=0A=
config.status: creating bindings/octave/PLplot/support/Makefile=0A=
config.status: creating bindings/octave/demos/Makefile=0A=
config.status: creating bindings/octave/misc/Makefile=0A=
config.status: creating bindings/java/Makefile=0A=
config.status: creating bindings/java/config.java=0A=
config.status: creating drivers/Makefile=0A=
config.status: creating examples/Makefile=0A=
config.status: creating examples/c/Makefile=0A=
config.status: creating examples/c/Makefile.examples=0A=
config.status: creating examples/c++/Makefile=0A=
config.status: creating examples/c++/Makefile.examples=0A=
config.status: creating examples/f77/Makefile=0A=
config.status: creating examples/f77/Makefile.examples=0A=
config.status: creating examples/python/Makefile=0A=
config.status: creating examples/python/plplot_python_start.py=0A=
config.status: creating examples/tcl/Makefile=0A=
config.status: creating examples/tk/Makefile=0A=
config.status: creating examples/tk/Makefile.examples=0A=
config.status: creating examples/java/Makefile=0A=
config.status: creating test/Makefile=0A=
config.status: creating test/plplot-test.sh=0A=
config.status: creating utils/Makefile=0A=
config.status: creating scripts/Makefile=0A=
config.status: creating plplot.pc=0A=
config.status: creating plplot-double.pc=0A=
config.status: creating include/plConfig.h=0A=
config.status: creating include/plDevs.h=0A=
config.status: executing depfiles commands=0A=
configure: configuring in libltdl=0A=
configure: running /bin/bash './configure' --prefix=3D/usr/local =
'--disable-dyndrivers' '--disable-tek4010f' '--disable-conex' =
'--disable-vlt' '--disable-versaterm' '--disable-mskermit' =
'--disable-tek4107' '--disable-tek4010' '--disable-xterm' =
'--disable-pstex' '--disable-psc' '--disable-pbm' '--disable-ntk' =
'--disable-ljiip' '--disable-linuxvga' '--disable-imp' '--enable-jpeg' =
'--disable-lj_hpgl' '--disable-hp7580' '--disable-hp7470' =
'--disable-gnome' '--disable-png' '--disable-cgm' '--disable-dg300' =
'--disable-xfig' '--disable-ljii' '--disable-gtktest' '--disable-pyton' =
'--disable-f77' '--enable-itcl' '--enable-java' '--enable-tcl' =
'--enable-tk' '--disable-cxx' '--disable-octave' =
--enable-ltdl-convenience --cache-file=3D/dev/null --srcdir=3D.=0A=
loading cache /dev/null=0A=
./configure: .: /dev/null: not a regular file=0A=
checking for a BSD compatible install... ./../install-sh -c=0A=
checking whether build environment is sane... yes=0A=
checking whether make sets ${MAKE}... yes=0A=
checking for working aclocal... missing=0A=
checking for working autoconf... missing=0A=
checking for working automake... missing=0A=
checking for working autoheader... missing=0A=
checking for working makeinfo... missing=0A=
checking whether to enable maintainer-specific portions of Makefiles... =
no=0A=
checking for gcc... gcc=0A=
checking whether the C compiler (gcc ) works... yes=0A=
checking whether the C compiler (gcc ) is a cross-compiler... no=0A=
checking whether we are using GNU C... yes=0A=
checking whether gcc accepts -g... yes=0A=
checking for working const... yes=0A=
checking for inline... inline=0A=
checking for Cygwin environment... no=0A=
checking for mingw32 environment... no=0A=
checking how to run the C preprocessor... gcc -E=0A=
checking host system type... sparc-sun-solaris2.8=0A=
checking build system type... sparc-sun-solaris2.8=0A=
checking for ld used by GCC... /usr/local/sparc-sun-solaris2.8/bin/ld=0A=
checking if the linker (/usr/local/sparc-sun-solaris2.8/bin/ld) is GNU =
ld... yes=0A=
checking for /usr/local/sparc-sun-solaris2.8/bin/ld option to reload =
object files... -r=0A=
checking for BSD-compatible nm... /usr/local/bin/nm -B=0A=
checking for a sed that does not truncate output... /usr/xpg4/bin/sed=0A=
checking whether ln -s works... yes=0A=
checking how to recognise dependent libraries... pass_all=0A=
checking for object suffix... o=0A=
checking for executable suffix... no=0A=
checking command to parse /usr/local/bin/nm -B output... ok=0A=
checking for dlfcn.h... yes=0A=
checking for ranlib... ranlib=0A=
checking for strip... strip=0A=
checking for objdir... .libs=0A=
checking for gcc option to produce PIC... -fPIC=0A=
checking if gcc PIC flag -fPIC works... yes=0A=
checking if gcc static flag -static works... yes=0A=
checking if gcc supports -c -o file.o... yes=0A=
checking if gcc supports -c -o file.lo... yes=0A=
checking if gcc supports -fno-rtti -fno-exceptions... yes=0A=
checking whether the linker (/usr/local/sparc-sun-solaris2.8/bin/ld) =
supports shared libraries... yes=0A=
checking how to hardcode library paths into programs... immediate=0A=
checking whether stripping libraries is possible... yes=0A=
checking dynamic linker characteristics... solaris2.8 ld.so=0A=
checking if libtool supports shared libraries... yes=0A=
checking whether to build shared libraries... yes=0A=
checking whether to build static libraries... yes=0A=
checking whether -lc should be explicitly linked in... yes=0A=
creating libtool=0A=
checking for ANSI C header files... yes=0A=
checking for dirent.h that defines DIR... yes=0A=
checking for opendir in -ldir... no=0A=
checking whether gcc supports assert without backlinking... =0A=
checking which extension is used for shared libraries... .so=0A=
checking which variable specifies run-time library path... =
LD_LIBRARY_PATH=0A=
checking for the default library search path... /lib /usr/lib=0A=
checking for objdir... .libs=0A=
checking whether libtool supports -dlopen/-dlpreopen... yes=0A=
checking for shl_load... no=0A=
checking for shl_load in -ldld... no=0A=
checking for dlopen in -ldl... yes=0A=
checking for dlerror... yes=0A=
checking for _ prefix in compiled symbols... no=0A=
checking whether deplibs are loaded by dlopen... yes=0A=
checking for argz.h... no=0A=
checking for error_t... no=0A=
checking for argz_append... no=0A=
checking for argz_create_sep... no=0A=
checking for argz_insert... no=0A=
checking for argz_next... no=0A=
checking for argz_stringify... no=0A=
checking for errno.h... yes=0A=
checking for malloc.h... yes=0A=
checking for memory.h... yes=0A=
checking for stdlib.h... yes=0A=
checking for stdio.h... yes=0A=
checking for ctype.h... yes=0A=
checking for unistd.h... yes=0A=
checking for dl.h... no=0A=
checking for sys/dl.h... yes=0A=
checking for dld.h... no=0A=
checking for string.h... yes=0A=
checking for strchr... yes=0A=
checking for strrchr... yes=0A=
checking for memcpy... yes=0A=
checking for memmove... yes=0A=
checking for strcmp... yes=0A=
updating cache /dev/null=0A=
creating ./config.status=0A=
creating Makefile=0A=
creating config.h=0A=
config.h is unchanged=0A=
Configure results:=0A=
=0A=
command: ./configure --disable-dyndrivers --disable-tek4010f =
--disable-conex --disable-vlt --disable-versaterm --disable-mskermit =
--disable-tek4107 --disable-tek4010 --disable-xterm --disable-pstex =
--disable-psc --disable-pbm --disable-ntk --disable-ljiip --disable-ljii =
--disable-linuxvga --disable-imp --enable-jpeg --disable-lj_hpgl =
--disable-hp7580 --disable-hp7470 --disable-gnome --disable-png =
--disable-cgm --disable-dg300 --disable-xfig --disable-ljii =
--disable-gtktest --disable-pyton --disable-f77 --enable-itcl =
--enable-java --enable-tcl --enable-tk --disable-cxx --disable-octave=0A=
system: sparc-sun-solaris2.8=0A=
prefix: /usr/local=0A=
CC: gcc =0A=
LIB_TAG:=0A=
devices: null plmeta ps tek4107f tk tkwin xwin=0A=
=0A=
Available device drivers=0A=
static: null.lo plmeta.lo ps.lo tek.lo tk.lo tkwin.lo xwin.lo=0A=
dynamic:=0A=
=0A=
with_shlib: yes with_double: no=0A=
with_debug: no with_opt: yes=0A=
with_warn: no with_profile: no=0A=
with_gcc: no with_rpath: yes=0A=
with_freetype: no=0A=
=0A=
enable_xwin: yes enable_tcl: yes=0A=
enable_tk: yes enable_itcl: yes=0A=
enable_cxx: no enable_python: no=0A=
enable_f77: no enable_java: no=0A=
enable_octave: no enable_gnome: no=0A=
enable_tkwin: yes |
