[Plplot-cvs] SF.net SVN: plplot:[11140] trunk/scripts/comprehensive_test.sh

[<ai...@us...>]

Revision: 11140
          http://plplot.svn.sourceforge.net/plplot/?rev=11140&view=rev
Author:   airwin
Date:     2010-08-20 18:20:16 +0000 (Fri, 20 Aug 2010)

Log Message:
-----------
Initial commit for script to organize comprehensive testing of PLplot
for all platforms with access to bash and GNU make.

For each of the three principal PLplot configurations, this script
runs all 7 of our fundamental tests.  Those three configurations
are (1) shared library/dynamic devices; (2) shared library/nondynamic
devices; and (3) static library/nondynamic devices.  The 7 fundamental
tests are ctest in the build tree and running the make targets
test_noninteractive and test_interactive in (1) the build tree; (2) the
installed examples tree with cmake build system; and (3) the installed
examples tree with traditional (Makefile + pkg-config) build system.

FIXME: currently the choice of which configurations and which of the 7
possible tests to run is controlled by some hard-coded variables. 
Those variables are currently set to use all all 7 tests for each of
the three configurations. Those variables should be controlled by
user-settable options for maximum flexibility.

Added Paths:
-----------
    trunk/scripts/comprehensive_test.sh

Added: trunk/scripts/comprehensive_test.sh
===================================================================
--- trunk/scripts/comprehensive_test.sh	                        (rev 0)
+++ trunk/scripts/comprehensive_test.sh	2010-08-20 18:20:16 UTC (rev 11140)
@@ -0,0 +1,151 @@
+#!/bin/bash
+
+# Complete tests of PLplot for the three generic build types which
+# consist of shared+dynamic, shared+nondynanic, and
+# static+nondynamic.  These complete tests that are run for each build
+# type are (I) ctest, test_noninteractive, and test_interactive in
+# build tree; (II) traditional [Makefile+pkg-config]
+# test_noninteractive and test_interactive of installed examples; and
+# (III) CMake-based test_noninteractive and test_interactive of
+# installed examples.
+
+# FIXME: the following should be set as a result of user options.
+# These control what kind of build is tested.
+CMAKE_ADDED_OPTIONS='-DPLD_pdf=ON'
+do_shared=yes
+do_nondynamic=yes
+do_static=yes
+
+# These control which of 7 tests that are run.
+do_ctest=yes
+do_build_tree_test=yes
+do_install_tree_test=yes
+do_traditional_tree_test=yes
+do_noninteractive_test=yes
+do_interactive_test=yes
+
+# Find absolute PATH of script without using readlink (since readlink is
+# not available on all platforms).  Followed advice at
+# http://fritzthomas.com/open-source/linux/551-how-to-get-absolute-path-within-shell-script-part2/
+ORIGINAL_PATH="$(pwd)"
+cd "$(dirname $0)"
+# Absolute Path of the script
+SCRIPT_PATH="$(pwd)"
+cd "${ORIGINAL_PATH}"
+
+# Assumption: top-level source tree is parent directory of where script
+# is located.
+SOURCE_TREE="$(dirname ${SCRIPT_PATH})"
+# This is the parent tree for the BUILD_TREE, INSTALL_TREE, 
+# INSTALL_BUILD_TREE, and OUTPUT_TREE.  It is disposable.
+PARENT_TREE="${SOURCE_TREE}/comprehensive_test_disposeable"
+
+function comprehensive_test {
+    mkdir -p "$OUTPUT_TREE"
+    rm -rf "$BUILD_TREE"
+    mkdir -p "$BUILD_TREE"
+    cd "$BUILD_TREE"
+    if [ "$do_ctest" = "yes" -o "$do_build_tree_test" = "yes" ] ; then
+	BUILD_TEST_OPTION="-DBUILD_TEST=ON"
+    else
+	BUILD_TEST_OPTION=""
+    fi
+    output="$OUTPUT_TREE"/cmake.out
+    rm -f "$output"
+    cmake "-DCMAKE_INSTALL_PREFIX=$INSTALL_TREE" $BUILD_TEST_OPTION \
+	$CMAKE_ADDED_OPTIONS $1 "$SOURCE_TREE" >& "$output"
+    cmake_rc=$?
+    if [ "$cmake_rc" -eq 0 ] ; then
+	if [ "$do_build_tree_test" = "yes" -a  "$do_noninteractive_test" = "yes" ] ; then
+	    output="$OUTPUT_TREE"/make_noninteractive.out
+	    rm -f "$output"
+	    make -j4 VERBOSE=1 test_noninteractive >& "$output"
+	fi
+	rm -rf "$INSTALL_TREE"
+	output="$OUTPUT_TREE"/make_install.out
+	rm -f "$output"
+	make -j4 VERBOSE=1 install >& "$output"
+	make_install_rc=$?
+	if [ "$make_install_rc" -eq 0 ] ; then
+	    PATH="$INSTALL_TREE/bin":$PATH
+	    if [ "$do_ctest" = "yes" ] ; then
+		output="$OUTPUT_TREE"/ctest.out
+		rm -f "$output"
+		ctest --extra-verbose >& "$output" &
+	    fi
+	    if [ "$do_install_tree_test" = "yes" ] ; then
+		rm -rf "$INSTALL_BUILD_TREE"
+		mkdir -p "$INSTALL_BUILD_TREE"
+		cd "$INSTALL_BUILD_TREE"
+		output="$OUTPUT_TREE"/installed_cmake.out
+		rm -f "$output"
+		cmake "$INSTALL_TREE"/share/plplot?.?.?/examples >& "$output"
+		if [ "$do_noninteractive_test" = "yes" ] ; then
+		    output="$OUTPUT_TREE"/installed_make_noninteractive.out
+		    rm -f "$output"
+		    make -j4 VERBOSE=1 test_noninteractive >& "$output"
+		fi
+	    fi
+	    if [ "$do_traditional_tree_test" = "yes" -a "$do_noninteractive_test" = "yes" ] ; then
+		cd "$INSTALL_TREE"/share/plplot?.?.?/examples
+		output="$OUTPUT_TREE"/traditional_make_noninteractive.out
+		rm -f "$output"
+		make -j4 test_noninteractive >& "$output"
+	    fi
+	else
+	    echo "ERROR: make install failed"
+	    exit 1
+	fi
+
+	if [ "$do_interactive_test" = "yes" ] ; then
+	    if [ "$do_build_tree_test" = "yes" ] ; then
+		cd "$BUILD_TREE"
+		output="$OUTPUT_TREE"/make_interactive.out
+		rm -f "$output"
+		make -j4 VERBOSE=1 test_interactive >& "$output"
+	    fi
+	    if [ "$do_install_tree_test" = "yes" ] ; then
+		cd "$INSTALL_BUILD_TREE"
+		output="$OUTPUT_TREE"/installed_make_interactive.out
+		rm -f "$output"
+		make -j4 VERBOSE=1 test_interactive >& "$output"
+	    fi
+	    if [ "$do_traditional_tree_test" = "yes" ] ; then
+		cd "$INSTALL_TREE"/share/plplot?.?.?/examples
+		output="$OUTPUT_TREE"/traditional_make_interactive.out
+		rm -f "$output"
+		make -j4 test_interactive >& "$output"
+	    fi
+	fi
+    else
+	echo "ERROR: cmake in build tree failed"
+	exit 1
+    fi
+}
+
+# Shared + dynamic
+if [ "$do_shared" = "yes" ] ; then
+    OUTPUT_TREE="$PARENT_TREE/shared/output_tree"
+    BUILD_TREE="$PARENT_TREE/shared/build_tree"
+    INSTALL_TREE="$PARENT_TREE/shared/install_tree"
+    INSTALL_BUILD_TREE="$PARENT_TREE/shared/install_build_tree"
+    comprehensive_test "-DBUILD_SHARED_LIBS=ON"
+fi
+
+# Shared + nondynamic
+if [ "$do_nondynamic" = "yes" ] ; then
+    OUTPUT_TREE="$PARENT_TREE/nondynamic/output_tree"
+    BUILD_TREE="$PARENT_TREE/nondynamic/build_tree"
+    INSTALL_TREE="$PARENT_TREE/nondynamic/install_tree"
+    INSTALL_BUILD_TREE="$PARENT_TREE/nondynamic/install_build_tree"
+    comprehensive_test "-DBUILD_SHARED_LIBS=ON -DENABLE_DYNDRIVERS=OFF"
+fi
+
+if [ "$do_static" = "yes" ] ; then
+# Static + nondynamic
+    OUTPUT_TREE="$PARENT_TREE/static/output_tree"
+    BUILD_TREE="$PARENT_TREE/static/build_tree"
+    INSTALL_TREE="$PARENT_TREE/static/install_tree"
+    INSTALL_BUILD_TREE="$PARENT_TREE/static/install_build_tree"
+    comprehensive_test "-DBUILD_SHARED_LIBS=OFF"
+fi


Property changes on: trunk/scripts/comprehensive_test.sh
___________________________________________________________________
Added: svn:executable
   + *
Added: svn:keywords
   + Author Date Id Revision
Added: svn:eol-style
   + native


This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.