RE: [Panicsel-developers] PEF setting

[Cress, A. R <and...@in...>]

Hugo,

Yes, pefconfig is intended to configure the BMC LAN traps via SNMP.  It =
will automatically look in your /etc/snmp/snmpd.conf file for an alert =
destination.  If there isn't one there, you would need to specify it via =
the -A command line option.

Also, tmconfig is used to set up the serial port parameters.=20
=20
To set up Serial Over LAN on a TIGPR2U platform, for instance:
1) Make sure BIOS Console Redirection is enabled.
2) Run tmconfig to set basic serial parameters.
3) Run pefconfig to enable the LAN linkage.  pefconfig will report a =
message like
   "SeupSerialOverLan: ret =3D 0" if this feature was set up =
successfully.

Andy

-----Original Message-----
From: pan...@li... =
[mailto:pan...@li...] On Behalf Of =
Hugo Monteiro Cacote
Sent: Tuesday, June 01, 2004 5:04 AM
To: pan...@li...
Subject: [Panicsel-developers] PEF setting


Dear All,


Can I use the panic_sel utilities in particular pefconfig to configure =
the=20
BMC PEF in order to send alert to the LAN (SNMP traps). I'm I also able =
to=20
configure Serial over LAN using the tmconfig utility ??


Thank you,
Hugo  Ca=E7ote   =20



-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. =

Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3D3149&alloc_id=3D8166&op=3Dclick
_______________________________________________
Panicsel-developers mailing list
Pan...@li...
https://lists.sourceforge.net/lists/listinfo/panicsel-developers