Re: [PacketFence-users] Missing node information in testing mode

[Zammit, L. <lu...@ak...>]

Yes, turn off the VLAN assignation:



It should return just the access accept and the device will lend on the VLAN configured on the switch port for wired and the VLAN assigned to the SSID for wireless.

Thanks,



Ludovic Zammit
Product Support Engineer Principal Lead

Cell: +1.613.670.8432
Akamai Technologies - Inverse
145 Broadway
Cambridge, MA 02142
Connect with Us:	 <https://community.akamai.com/>  <http://blogs.akamai.com/>  <https://twitter.com/akamai>  <http://www.facebook.com/AkamaiTechnologies>  <http://www.linkedin.com/company/akamai-technologies>  <http://www.youtube.com/user/akamaitechnologies?feature=results_main>

> On Feb 20, 2024, at 11:56 AM, sh...@gm... wrote:
> 
>  
> Hello Ludovic,
>  
> thank you for your answer.
>  
> Is there any way in production mode of gattering these mac-addresses and like the missing switch/port information but without changing VLAN assignment on the switch side?
>  
> Regards
> Sebastian
>  
> Gesendet: Dienstag, 20. Februar 2024 um 16:07 Uhr
> Von: "Zammit, Ludovic" <lu...@ak...>
> An: "pac...@li..." <pac...@li...>
> Cc: "sh...@gm..." <sh...@gm...>
> Betreff: Re: [PacketFence-users] Missing node information in testing mode
> Hello Sebastian,
>  
> It’s probably normal because we rarely use that mode.
>  
> It could be something we did not have tested, it would make sense because those information are populated during a real authentication.
>  
> Thanks,
> 
> 
>  
> Ludovic Zammit
> Product Support Engineer Principal Lead
> 
>  
> Cell: +1.613.670.8432	Akamai Technologies - Inverse
> 145 Broadway
> Cambridge, MA 02142
>  
> Connect with Us:	 <https://community.akamai.com/>  <http://blogs.akamai.com/>  <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!TapwHcmDAMuMPXilp0sMxA1ccyfVa09KayuAy0-CMnPh0UdB5QNXyThwmamwWqOhW3v49T9h-zr77A$>  <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!TapwHcmDAMuMPXilp0sMxA1ccyfVa09KayuAy0-CMnPh0UdB5QNXyThwmamwWqOhW3v49T-hIPRyGw$>  <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!TapwHcmDAMuMPXilp0sMxA1ccyfVa09KayuAy0-CMnPh0UdB5QNXyThwmamwWqOhW3v49T_3Xfzd-Q$>  <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!TapwHcmDAMuMPXilp0sMxA1ccyfVa09KayuAy0-CMnPh0UdB5QNXyThwmamwWqOhW3v49T-3iRKNng$>
>  
> On Feb 20, 2024, at 8:52 AM, sh1ndy--- via PacketFence-users <pac...@li...> wrote:
>  
>  
>  
>  
> I am currently running an HP Aruba switch in testing mode to gather mac addresses.
> I noticed many of the node information is missing. The Location tab is completely empty.
> Also there is no Last Switch information at the Info tab. Is this by design?
>  
> Regards
> Sebastian
> _______________________________________________
> PacketFence-users mailing list
> Pac...@li...
> https://urldefense.com/v3/__https://lists.sourceforge.net/lists/listinfo/packetfence-users__;!!GjvTz_vk!QXJNlaflFindEBM8oGdxjuP6H8I9M_YWaoiazZw3H-JO0aNljgVMUl0RJp_DnBvdLa_jfkA5Rnm8Vp7xeB54MKz4QBjeNUfc1ymcuQ$