[PacketFence-users] DHCiP not running on eth0 interface

[TOURE A. F. <ami...@ya...>]

Hi,I have a problem running with my packetfence. Now I have configure it to work  with a cisco 2960 swicth and the server is running on a wmware worksation machine.When packetfence put the device on the registration vlan the client doesn't get an IP address and a static ip address on this same client  doesn't permit to ping packetfence server or to ping the switch.eth0 interface seems to be running.The output of radius debug shows this  [suffix] No '@' in User-Name = "Administrateur", skipping NULL due to config.++[suffix] = noop[ntdomain] No '\' in User-Name = "Administrateur", looking up realm NULL[ntdomain] No such realm "NULL"++[ntdomain] = noop++[preprocess] = ok[eap] EAP packet type response id 10 length 43[eap] Continuing tunnel setup.++[eap] = ok+} # group authorize = okFound Auth-Type = EAP# Executing group from file /usr/local/pf/raddb//sites-enabled/packetfence+group authenticate {[eap] Request found, released from the list[eap] EAP/peap[eap] processing type peap[peap] processing EAP-TLS[peap] eaptls_verify returned 7 [peap] Done initial handshake[peap] eaptls_process returned 7 [peap] EAPTLS_OK[peap] Session established.  Decoding tunneled attributes.[peap] Peap state send tlv success[peap] Received EAP-TLV response.[peap] Success[peap] Using saved attributes from the original Access-Accept Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Type:0 = VLAN Tunnel-Private-Group-Id:0 = "100" User-Name = "Administrateur"[eap] Freeing handler++[eap] = ok+} # group authenticate = okLogin OK: [Administrateur] (from client 192.168.1.5 port 50003 cli 00:40:d0:67:d0:b1)} # server packetfence# Executing section post-auth from file /usr/local/pf/raddb//sites-enabled/packetfence+group post-auth {++[exec] = noop++? if (!EAP-Type || (EAP-Type != EAP-TTLS  && EAP-Type != PEAP))? Evaluating !(EAP-Type ) -> FALSE?? Evaluating (EAP-Type != EAP-TTLS  ) -> TRUE?? Evaluating (EAP-Type != PEAP) -> FALSE++? if (!EAP-Type || (EAP-Type != EAP-TTLS  && EAP-Type != PEAP)) -> FALSE+} # group post-auth = noopSending Access-Accept of id 42 to 192.168.1.5 port 1645 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Type:0 = VLAN Tunnel-Private-Group-Id:0 = "100" User-Name = "Administrateur" MS-MPPE-Recv-Key = 0xf68acbdf500d49b410cdfc7e55f80616b05cc4b2ef2ca466d212317af86838ff MS-MPPE-Send-Key = 0x127d4a339e47839cd271f86f062913e861408355d02e43364597daba13d2108e EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000Finished request 16.Going to the next requestWaking up in 4.9 seconds.Cleaning up request 15 ID 41 with timestamp +45Cleaning up request 16 ID 42 with timestamp +49Ready to process requests.  Now the output of packetfence.log and pfdhcplistener.log
Apr 26 11:49:51 httpd.aaa(50960) INFO: [mac:00:40:d0:67:d0:b1] is of status unreg; belongs into registration VLAN (pf::role::getRegistrationRole)Apr 26 11:49:51 httpd.aaa(50960) INFO: [mac:00:40:d0:67:d0:b1] (192.168.1.5) Added VLAN 100 to the returned RADIUS reply (pf::Switch::returnRadiusAccessAccept)Apr 26 11:49:51 httpd.aaa(50960) INFO: [mac:00:40:d0:67:d0:b1] (192.168.1.5) Returning ACCEPT with VLAN 100  (pf::Switch::returnRadiusAccessAccept)Apr 26 11:49:51 httpd.aaa(50960) INFO: [mac:00:40:d0:67:d0:b1] (192.168.1.5) No access lists defined for this role registration (pf::Switch::Cisco::Catalyst_2960::returnRadiusAccessAccept)
Apr 26 11:16:26 pfdhcplistener(51054) WARN: Unable to open VLAN proc description for eth0: No such file or directory (pf::util::get_vlan_from_int)Apr 26 11:16:26 pfdhcplistener(51054) INFO: DHCP detector on eth0 enabled (main::)Apr 26 11:16:26 pfdhcplistener(51054) INFO: Reload configuration on eth0 with status 0 (main::reload_config)
Why a static IP on the host can't reach the server or can ping the switch?All the firewalls have been stopped.Can I have a help?thanks