Re: [PacketFence-users] No answer to the RADIUS disconnect

[Michael S. <mic...@in...>]

Hi Ellyn,
Have you enabled Dynamic Authorization Extensions (RFC 5176) in the hostapd.conf file on your AP?
https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf

# Dynamic Authorization Extensions (RFC 5176)

# This mechanism can be used to allow dynamic changes to user session based on

# commands from a RADIUS server (or some other disconnect client that has the

# needed session information). For example, Disconnect message can be used to

# request an associated station to be disconnected.

#

# This is disabled by default. Set radius_das_port to non-zero UDP port

# number to enable.

#radius_das_port=3799

#

# DAS client (the host that can send Disconnect/CoA requests) and shared secret

#radius_das_client=192.168.1.123 shared secret here

#

# DAS Event-Timestamp time window in seconds

#radius_das_time_window=300

#

# DAS require Event-Timestamp

#radius_das_require_event_timestamp=1

Cheers,

Michael





Invigor Group Limited is a company registered in Australia (ABN 75 081 368 274). This email and any attachments are intended solely for the use of the addressee(s) and may contain information that is confidential, subject to copyright and subject to legal professional privilege. If you have received this email in error, please notify the sender immediately, delete it and destroy all copies. Any views expressed are those of the individual sender unless expressly stated otherwise. In respect of this email and any attachments, to the extent permitted by law, no warranty is given and all liability is excluded,including, without limitation, liability for any loss or damage caused by way of computer virus, defect, delay, or interruption.