|
From: Hubert K. <ku...@un...> - 2015-07-23 05:02:52
|
Yes, I have done this. On the 2960G: aaa authentication dot1x default group radius aaa accounting dot1x default start-stop group radius Regards, Hubert Am 22.07.2015 um 20:16 schrieb Louis Munro: > It may not be your config that’s wrong. > It may be that the switch is not sending accounting data to PacketFence. > > Have you configured RADIUS accounting on the 2960? > > Regards, > -- > Louis Munro > lm...@in... <mailto:lm...@in...> :: www.inverse.ca > <http://www.inverse.ca> > +1.514.447.4918 x125 :: +1 (866) 353-6153 x125 > Inverse inc. :: Leaders behind SOGo (www.sogo.nu <http://www.sogo.nu>) > and PacketFence (www.packetfence.org <http://www.packetfence.org>) > > On Jul 22, 2015, at 1:11 , Hubert Kupper <ku...@un... > <mailto:ku...@un...>> wrote: > >> Hello, >> >> I have running Packetfence-ZEN-5-1 fine. I created a test bandwidth >> violation of 2MB/Day but nothing happens when a client uses more than >> 2MB traffic. The web interface shows "there is not enough data to create >> the graph" and violation.log shows only DHCP violations. >> >> I added the following line to the Cisco 2960G in switches.conf: >> >> deauthMethod=RADIUS >> >> In violations.conf: >> >> [1100013] >> desc=Bandwidth Limit test (2MB/day) >> template=bandwidth_limit >> #hk090715 trigger=Accounting::BandwidthExpired >> trigger=Accounting::TOT2MBD >> window=dynamic >> enabled=Y >> actions=trap,log >> priority=1 >> auto_enable=N >> whitelisted_categories= >> vlan=isolation >> >> >> So what is wrong with my config? >> >> Best regards, >> Hubert >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> PacketFence-users mailing list >> Pac...@li... >> <mailto:Pac...@li...> >> https://lists.sourceforge.net/lists/listinfo/packetfence-users > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > PacketFence-users mailing list > Pac...@li... > https://lists.sourceforge.net/lists/listinfo/packetfence-users -- _____________________________________________ Hubert Kupper Universitaetsrechenzentrum in Landau Fortstrasse 7, D-76829 Landau Tel: +49 6341/28031173 Fax: +49 6341/28031267 |