[PacketFence-devel] Support of Netgear GS110TP

[Michael K. <mic...@rz...>]

Hi,

I just found out you are supporting the Netgear GS110TP - that's really 
great.
You say that the Netgear GS110 is not supporting Port-Security but in 
firmware version 5.0.3.5 this is possible.

The following is part of the configuration of our Netgear GS110TP with 
port security and sending SNMP traps on violation of port security enabled:


--- saved configuration ----
port-security
interface 0/2
   vlan participation auto 1
   vlan participation include 2042
   port-security
   port-security max-dynamic 2
   snmp-server enable traps violation
   exit
--- saved configuration ----


I also verified that the switch is sending the port violation traps to 
the PacketFence server, but it doesn't recognize these SNMP traps from 
the switch. I am going to try get it working with the GS110.pm module 
but I think it's much easier for you to get this working.
Maybe you also have a working solution I can use?


Best regards,
Mike

--------------------------------------------------------------------------------
Michael Kölbl / Rechenzentrum         Phone   +49 89 3299 1305
Max-Planck-Institut für Plasmaphysik  Fax     +49 89 3299 9613 05
Boltzmannstr. 2                       E-Mail: mic...@rz...
D-85748 Garching/München              Web:    http://www.rzg.mpg.de/~ick
--------------------------------------------------------------------------------