Logged In: NO
Browser: Mozilla/4.7 [en] (X11; I; Linux 2.2.14-15mdk i686)
Hi, I hate to bother you but I'm in need of help. I
have a Linux-Mandrake running on PIII733 with GeForce.
I installed and configured XFree86-4.0 and nVidia new
drivers. Everything is working. Befoure installation
removed or uninstalled Mesa and lib files that were on
the way of installation. I installed UT 400a. UT.ini
was missing , I got it from your webpage. Using UTCP I
configured it to use SDL, which is installed (latest).
But SDLDrv.so , SDLGL.so and SDLGL.ini are missing from
UT/system directory. I have no idia how to get them.
Please help me , in detail(new to Linux), I already
spent 12 hr trying to get this game running.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Change to where you installed UT and then uncompress the
patch file with "bunzip2 -dc UT-Patch413a-Linux.tar.bz2 |
tar xvf -". Now change into the newly created "Patch"
directory. Read the README there for instructions.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Logged In: NO
Browser: Mozilla/4.7 [en] (X11; I; Linux 2.2.14-15mdk i686)
Well I did everything and still same error: Failed to load
'SDLDrv' : Can't find file for package 'SDLDrv'
What am I doing wrong and how to fix it. I'm getting
desperate, please help!!!!!!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Logged In: NO
Browser: Mozilla/4.7 [en] (X11; I; Linux 2.2.14-15mdk i686)
I think I might know what is the problem. Reading OpenUT
HOWTO I noticed in section for SDL that some files mignt not
get installed. I checked my /user/include and I don't even
have /SDL dirrectory. Maybe I did something wrong during
install SDL-1.1.2 ? here is what I used after uncompressing:
cd SDl-1.1.2
./configure
make
make install
everything went thru without any error mesages, I also tryed
./configure --enable-dynamic-opengl
make
make install
What should I do?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Logged In: NO
Browser: Mozilla/4.0 (compatible; MSIE 5.01; Windows 98)
Ok, problem: during instalation of nvidia drivers I removed
Mesa and everything that was on the way. But I did a backup
of X11R6 and X11,so I still have it. I checked config.log
of SDL-1.1.2 and found following error. Couldn't
find /GL/gl.h and /GL/glx.h. Maybe that is the reson my SDL
doesnt work. I checked /usr/include and surely enuf I don't
have /GL dirrectory. I downloaded gl.h and glx.h from
Mesa3D SVC(latest). Question: do I create a /GL
dirrectory , put these files in there and recompile SDL, or
what should I do. Sorry for so many questions, but I'm
realy new to Linux and apreciate any help I can get.
Grateful in advance.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Logged In: NO
Browser: Mozilla/4.72 [en] (X11; I; Linux 2.2.14 i586)
How did u made it work? I get the same message.. I already
had SDL installed (i am a 3d linux programmer - or at least
thats wut i like to think :))..
pls help me.. :)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Logged In: NO
Browser: Mozilla/4.0 (compatible; MSIE 5.01; Windows 98)
Here is how I got to work: download latest .rpm of SDL even
if you already have it and install it, than go to SVC and
follow instraction on compiling it and compile . I know it
might sound strange but that is how it worked for me...
Good luck.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Logged In: NO
Browser: Mozilla/4.7 [en] (X11; I; Linux 2.2.14-15mdk i686)
Hi, I hate to bother you but I'm in need of help. I
have a Linux-Mandrake running on PIII733 with GeForce.
I installed and configured XFree86-4.0 and nVidia new
drivers. Everything is working. Befoure installation
removed or uninstalled Mesa and lib files that were on
the way of installation. I installed UT 400a. UT.ini
was missing , I got it from your webpage. Using UTCP I
configured it to use SDL, which is installed (latest).
But SDLDrv.so , SDLGL.so and SDLGL.ini are missing from
UT/system directory. I have no idia how to get them.
Please help me , in detail(new to Linux), I already
spent 12 hr trying to get this game running.
Logged In: YES
user_id=18639
Browser: Mozilla/4.73 [en] (X11; I; Linux 2.2.15pre16 i586; Nav)
400a does not support SDL. Upgrade your installation to 413
using this:
http://download.sourceforge.net/OpenUT/UT-Patch413a-Linux.tar.bz2
Change to where you installed UT and then uncompress the
patch file with "bunzip2 -dc UT-Patch413a-Linux.tar.bz2 |
tar xvf -". Now change into the newly created "Patch"
directory. Read the README there for instructions.
Logged In: NO
Browser: Mozilla/4.7 [en] (X11; I; Linux 2.2.14-15mdk i686)
Thanks for reply. I'll do that right now and hope everything
will work this time :-). It's time to play!
Logged In: NO
Browser: Mozilla/4.7 [en] (X11; I; Linux 2.2.14-15mdk i686)
Well I did everything and still same error: Failed to load
'SDLDrv' : Can't find file for package 'SDLDrv'
What am I doing wrong and how to fix it. I'm getting
desperate, please help!!!!!!
Logged In: NO
Browser: Mozilla/4.7 [en] (X11; I; Linux 2.2.14-15mdk i686)
I think I might know what is the problem. Reading OpenUT
HOWTO I noticed in section for SDL that some files mignt not
get installed. I checked my /user/include and I don't even
have /SDL dirrectory. Maybe I did something wrong during
install SDL-1.1.2 ? here is what I used after uncompressing:
cd SDl-1.1.2
./configure
make
make install
everything went thru without any error mesages, I also tryed
./configure --enable-dynamic-opengl
make
make install
What should I do?
Logged In: NO
Browser: Mozilla/4.0 (compatible; MSIE 5.01; Windows 98)
Ok, problem: during instalation of nvidia drivers I removed
Mesa and everything that was on the way. But I did a backup
of X11R6 and X11,so I still have it. I checked config.log
of SDL-1.1.2 and found following error. Couldn't
find /GL/gl.h and /GL/glx.h. Maybe that is the reson my SDL
doesnt work. I checked /usr/include and surely enuf I don't
have /GL dirrectory. I downloaded gl.h and glx.h from
Mesa3D SVC(latest). Question: do I create a /GL
dirrectory , put these files in there and recompile SDL, or
what should I do. Sorry for so many questions, but I'm
realy new to Linux and apreciate any help I can get.
Grateful in advance.
Logged In: YES
user_id=32278
Browser: Mozilla/4.7 [en] (X11; I; Linux 2.2.14-15mdk i686)
Problem solved!!!! My UT is workin!
Logged In: NO
Browser: Mozilla/4.72 [en] (X11; I; Linux 2.2.14 i586)
How did u made it work? I get the same message.. I already
had SDL installed (i am a 3d linux programmer - or at least
thats wut i like to think :))..
pls help me.. :)
Logged In: NO
Browser: Mozilla/4.0 (compatible; MSIE 5.01; Windows 98)
Here is how I got to work: download latest .rpm of SDL even
if you already have it and install it, than go to SVC and
follow instraction on compiling it and compile . I know it
might sound strange but that is how it worked for me...
Good luck.