Dear Alberto, I need help again. I tried to write 16F1704 like 16f1503 or 16F1822 allmost of program work but not all. What I must to do to can write properly.And If you teach me (????) maibe I can add new device in list... I dont now if it easy or not.
With best regards Stefan
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello, those devices are more or less verified, so you should not have any problem writing them.
What do you mean with not all work?
Do you get a write error?
Please save a log in that case.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Thank for your fast replay
I had only normaly error : UNKNOWN DEVICE (BECAUSE IS DIFERENT) and config word were is diferent the bit wich is not use .( but is not realy error, I check it).
I check again the config word and register and now I fixed the problem. I write the 16F1704 with the programmer set on 16F1824 and evrithing it is OK now.
Thanks again (sorry for my english)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Heloo again
Today I understand your question and I get the new version of opgui v0.9.1.
I use 0.9.0 , and I don't now you made upgrade. I read constant-ly what are posted in forum but you do not write there is a new version WITH A LOT OF NEW CIPS!!!!
tHANKS for your job . I must download at first some GDK for use in Windows XP but now I load and realy works with the new cips.
Maybe you must to post in forum your new version , for other users like me.....????
THANKS AGAIN
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Yes, I was not sure if support had been already added in the published version or in only my private development version.
Anyways, I'll post a message next time.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello again
Dear Alberto, I need help again. I tried to write 16F1704 like 16f1503 or 16F1822 allmost of program work but not all. What I must to do to can write properly.And If you teach me (????) maibe I can add new device in list... I dont now if it easy or not.
With best regards Stefan
Hello, those devices are more or less verified, so you should not have any problem writing them.
What do you mean with not all work?
Do you get a write error?
Please save a log in that case.
Thank for your fast replay
I had only normaly error : UNKNOWN DEVICE (BECAUSE IS DIFERENT) and config word were is diferent the bit wich is not use .( but is not realy error, I check it).
I check again the config word and register and now I fixed the problem. I write the 16F1704 with the programmer set on 16F1824 and evrithing it is OK now.
Thanks again (sorry for my english)
Hello again
I still have a problem with 16F 1613. this cip have 3 config words and OpProg write only two if I set on 16f1824 . What I have to do ??
Best regards .Stefan
I don't understand why you select a device which is different from the one you want to program.
because this two cip ther is not in list of device.
maybe there are a new soft of programmer with impruved list and I not make upgrade?
Heloo again
Today I understand your question and I get the new version of opgui v0.9.1.
I use 0.9.0 , and I don't now you made upgrade. I read constant-ly what are posted in forum but you do not write there is a new version WITH A LOT OF NEW CIPS!!!!
tHANKS for your job . I must download at first some GDK for use in Windows XP but now I load and realy works with the new cips.
Maybe you must to post in forum your new version , for other users like me.....????
THANKS AGAIN
Yes, I was not sure if support had been already added in the published version or in only my private development version.
Anyways, I'll post a message next time.