Mr. Alberto Maccioni
as I can schedule ATmega328?
sorry this question
I have 2 files with .hex
extension and .eep
my question is, would load the two files
in this order
also fuses have that order. For the IC settings you need to set FUSEBIT from the microcontroller:
• LFUSE = 0XFF
• HFUSE = 0XDE
Link Download :
Last edit: Anonymous 2016-01-20
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
View and moderate all "Open Discussion" comments posted by this user
Mark all as spam, and block user from posting to "Discussion"
Mr. Alberto Maccioni
as I can schedule ATmega328?
sorry this question
I have 2 files with .hex
extension and .eep
my question is, would load the two files
in this order
also fuses have that order. For the IC settings you need to set FUSEBIT from the microcontroller:
• LFUSE = 0XFF
• HFUSE = 0XDE
Link Download :
Last edit: Anonymous 2016-01-20
ATmega 328 is supported and verified.
Both files are handled; fuses have to be entered manually in the device options.