Bonjour,
I never tried this method, it all depends from where it is loaded in memory: if the final address is the same as specified (i.e. at the beginning) it's likely to work, otherwise you may have to do some code changes and recompile.
Please keep us informed.
Best regards.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I used Windows 7 x64+ VEN24/FT232BL+buffer +ExtraPic,Vpp 12,2..12,3 V, WinPIC , JDM interface for flashing . I recommend using .hex for HID bootloader for correct flashing (from ORG 0800 or 1000 )
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Bonjour
it's possible to load firmware in pic18f2550 with microchip bootloader ?
Regards
Bonjour,
I never tried this method, it all depends from where it is loaded in memory: if the final address is the same as specified (i.e. at the beginning) it's likely to work, otherwise you may have to do some code changes and recompile.
Please keep us informed.
Best regards.
View and moderate all "Open Discussion" comments posted by this user
Mark all as spam, and block user from posting to "Discussion"
I used Windows 7 x64+ VEN24/FT232BL+buffer +ExtraPic,Vpp 12,2..12,3 V, WinPIC , JDM interface for flashing . I recommend using .hex for HID bootloader for correct flashing (from ORG 0800 or 1000 )