---
** [tickets:#391] RTT Only Prints To Console When it is Stopped and Started Again**
**Status:** new
**Milestone:** 0.10.0
**Created:** Fri Apr 14, 2023 06:58 PM UTC by Ben Roytburd
**Last Updated:** Fri Apr 14, 2023 06:58 PM UTC
**Owner:** nobody
I am debugging an AM6548 SoC, specifically the Cortex-R5 core of the SoC, I am using the development board's (AM65x_GP_EVM) integrated XDS110 debugger. I have been able to integrate SEGGER print statements into my code as well, and configuring RTT on OpenOCD I am able to see the _SEGGER_RTT symbol and find the control block.
The issue is that the RTT console that is created by OpenOCD does not print out data in real time, I have to `monitor rtt stop` then `monitor rtt start` in the debug console, and then all the print data that was in the RTT control block is printed out. This behavior is pretty consistent. I use just a basic telnet connection to monitor the RTT terminal.
Here are some details about my setup
OS: WSL: Ubuntu 20.04 LTS
GDB Version: gdb-multiarch (GNU gdb (Ubuntu 9.2-0ubuntu1~20.04.1) 9.2)
OpenOCD version: Open On-Chip Debugger 0.12.0-rc1+dev-00924-gae937791d (2022-09-29-09:21)
The commands I am using to initialize the RTT terminal are as follows:
~~~
(gdb) monitor rtt setup 0xa040f974 10 {SEGGER RTT}
(gdb) monitor rtt server start 60000 0
Listening on port 60000 for rtt connections
(gdb) monitor rtt start
rtt: Searching for control block 'SEGGER RTT'
rtt: Control block found at 0xa040f974
~~~
And then to connect to the RTT terminal I use `telnet localhost 60001`. And my print statements are not printed as I run the code, only when I `monitor rtt stop` and `monitor rtt start` from the gdb terminal do I see all the buffered print statements dumped.
---
Sent from sourceforge.net because ope...@li... is subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list. |
