Folks,
I'm sorry if I'm missing something very obvious here, so please feel
free to push me back onto the right lines if I am. I've distilled the
problem down as far as I'm able.
1) I can start openocd with a command like;
openocd -f /usr/local/lib/openocd/board/olimex_lpc_h2148.cfg -f
/usr/local/lib/openocd/interface/olimex-arm-usb-ocd.cfg
I can then telnet to localhost 4444 and enter the command 'reset' and it
works perfectly, resetting my target.
2) If I run the same command, but include the 'reset' as a command line
option, in this way;
openocd -f /usr/local/lib/openocd/board/olimex_lpc_h2148.cfg -f
/usr/local/lib/openocd/interface/olimex-arm-usb-ocd.cfg -c 'reset'
...then I get;
$URL: svn://svn.berlios.de/openocd/trunk/src/openocd.c $
Runtime error, file "command.c", line 456:
Unknown command: reset
I've gone to current SVN to see if I had a problem from there, but to no
avail. I'm sure I'm doing something wrong, but no idea what. Im
actually trying to use 'reset' and other commands in a command file, but
this description distils down the core of my problem and doesn't need
any config to show it up.
Please help a stoopid person today....thanks in advance.
DAVE
|
