This is an automated email from Gerrit.
"zapb <de...@za...>" just uploaded a new patch set to Gerrit, which you can find at https://review.openocd.org/c/openocd/+/9000
-- gerrit
commit 10ebb2a37505dbb7f3726bf85f3a0b2bfa17dfb3
Author: Marc Schink <de...@za...>
Date: Sun Jul 13 19:56:45 2025 +0000
flash/nor/stm32l4x: Rework 'option_read' output
Remove the verbose command output to enable processing with Tcl.
Change-Id: I97c2ffbd7bbbb3064a98f8977373f6c48272e71e
Signed-off-by: Marc Schink <de...@za...>
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 22095d4b27..7b0db14776 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -8357,8 +8357,8 @@ is the register offset of the Option byte to read.
For example to read the FLASH_OPTR register:
@example
stm32l4x option_read 0 0x20
-# Option Register (for STM32L4x): <0x40022020> = 0xffeff8aa
-# Option Register (for STM32WBx): <0x58004020> = ...
+# Option Register (for STM32L4x): 0xffeff8aa
+# Option Register (for STM32WBx): ...
# The correct flash base address will be used automatically
@end example
diff --git a/src/flash/nor/stm32l4x.c b/src/flash/nor/stm32l4x.c
index 8001aaf006..44590c7482 100644
--- a/src/flash/nor/stm32l4x.c
+++ b/src/flash/nor/stm32l4x.c
@@ -2409,17 +2409,16 @@ COMMAND_HANDLER(stm32l4_handle_option_read_command)
if (retval != ERROR_OK)
return retval;
- uint32_t reg_offset, reg_addr;
+ uint32_t reg_offset;
uint32_t value = 0;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], reg_offset);
- reg_addr = stm32l4_get_flash_reg(bank, reg_offset);
retval = stm32l4_read_flash_reg(bank, reg_offset, &value);
if (retval != ERROR_OK)
return retval;
- command_print(CMD, "Option Register: <0x%" PRIx32 "> = 0x%" PRIx32 "", reg_addr, value);
+ command_print(CMD, "0x%" PRIx32, value);
return retval;
}
--
|
