This is an automated email from Gerrit.
Matthew Stephenson (op...@ma...) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/5988
-- gerrit
commit 877111e3a56e8c71d70efa8f8c091315c0556bbf
Author: Matthew Stephenson <op...@ma...>
Date: Sun Dec 27 10:35:14 2020 +0000
tcl/board: Add STM32G031J6 Discovery configuration
Add configuration for STM32G031J6 Discovery board
Change-Id: Ifca2ee1fbbb2804a571e1ee5c47048ff74d84431
Signed-off-by: Matthew Stephenson <op...@ma...>
diff --git a/tcl/board/stm32g0discovery.cfg b/tcl/board/stm32g0discovery.cfg
new file mode 100644
index 0000000..7024bcd
--- /dev/null
+++ b/tcl/board/stm32g0discovery.cfg
@@ -0,0 +1,16 @@
+# This is an STM32G031J6 discovery board with a single STM32G031J6 chip.
+# https://www.st.com/en/evaluation-tools/stm32g0316-disco.html
+#
+# The reset_config is set to "none" because the pre-programmed
+# demonstration configures the reset pin as GPIO during part of its
+# operation, in which case "reset_config srst_only" won't work.
+
+source [find interface/stlink.cfg]
+
+transport select hla_swd
+
+set WORKAREASIZE 0x1000
+source [find target/stm32g0x.cfg]
+
+reset_config none
+#reset_config srst_only
--
|
