openocd-commit

[Andreas F. <nat...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  4017af8492f37b7659eafebae5ab3dde80f1249f (commit)
      from  c50ed69e792001ef197aa64522658ba0bffdfd98 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 4017af8492f37b7659eafebae5ab3dde80f1249f
Author: Luca Bruno <lu...@de...>
Date:   Sat Sep 10 17:01:46 2011 +0200

    Fixes and spellchecks for various Buspirate output messages
    
    Signed-off-by: Luca Bruno <lu...@de...>

diff --git a/src/jtag/drivers/buspirate.c b/src/jtag/drivers/buspirate.c
index a360d23..62ab008 100644
--- a/src/jtag/drivers/buspirate.c
+++ b/src/jtag/drivers/buspirate.c
@@ -217,13 +217,13 @@ static int buspirate_execute_queue(void)
 static int buspirate_init(void)
 {
 	if (buspirate_port == NULL) {
-		LOG_ERROR("You need to specify port !");
+		LOG_ERROR("You need to specify the serial port!");
 		return ERROR_JTAG_INIT_FAILED;
 	}
 
 	buspirate_fd = buspirate_serial_open(buspirate_port);
 	if (buspirate_fd == -1) {
-		LOG_ERROR("Could not open serial port.");
+		LOG_ERROR("Could not open serial port");
 		return ERROR_JTAG_INIT_FAILED;
 	}
 
@@ -249,7 +249,7 @@ static int buspirate_init(void)
 
 static int buspirate_quit(void)
 {
-	LOG_INFO("Shuting down buspirate ");
+	LOG_INFO("Shutting down buspirate.");
 	buspirate_jtag_set_mode(buspirate_fd, MODE_HIZ);
 
 	buspirate_jtag_set_speed(buspirate_fd, SERIAL_NORMAL);
@@ -665,7 +665,7 @@ static void buspirate_tap_append(int tms, int tdi)
 
 		tap_chain_index++;
 	} else
-		LOG_ERROR("tap_chain overflow, Bad things will happen");
+		LOG_ERROR("tap_chain overflow, bad things will happen");
 
 }
 
@@ -724,19 +724,19 @@ static void buspirate_jtag_enable(int fd)
 	while (!done) {
 		ret = buspirate_serial_read(fd, tmp, 4);
 		if (ret != 4) {
-			LOG_ERROR("Buspirate error. Is is binary/"
+			LOG_ERROR("Buspirate error. Is binary"
 				"/OpenOCD support enabled?");
 			exit(-1);
 		}
 		if (strncmp(tmp, "BBIO", 4) == 0) {
 			ret = buspirate_serial_read(fd, tmp, 1);
 			if (ret != 1) {
-				LOG_ERROR("Buspirate did not correctly! "
+				LOG_ERROR("Buspirate did not answer correctly! "
 					"Do you have correct firmware?");
 				exit(-1);
 			}
 			if (tmp[0] != '1') {
-				LOG_ERROR("Unsupported binary protocol ");
+				LOG_ERROR("Unsupported binary protocol");
 				exit(-1);
 			}
 			if (cmd_sent == 0) {
@@ -747,7 +747,7 @@ static void buspirate_jtag_enable(int fd)
 		} else if (strncmp(tmp, "OCD1", 4) == 0)
 			done = 1;
 		else {
-			LOG_ERROR("Buspirate did not correctly! "
+			LOG_ERROR("Buspirate did not answer correctly! "
 				"Do you have correct firmware?");
 			exit(-1);
 		}
@@ -794,7 +794,7 @@ static void buspirate_jtag_set_speed(int fd, char speed)
 		exit(-1);
 	}
 	if ((tmp[0] != CMD_UART_SPEED) || (tmp[1] != speed)) {
-		LOG_ERROR("Buspirate didn't reply as expected");
+		LOG_ERROR("Buspirate did not reply as expected");
 		exit(-1);
 	}
 	LOG_INFO("Buspirate switched to %s mode",

-----------------------------------------------------------------------

Summary of changes:
 src/jtag/drivers/buspirate.c |   18 +++++++++---------
 1 files changed, 9 insertions(+), 9 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository