openocd-commit

[David B. <dbr...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  5ae48dba487b76162c2d108193241e34330abe5b (commit)
      from  4bc3132a1e8229e6475fa64ce095330a71cb10ae (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 5ae48dba487b76162c2d108193241e34330abe5b
Author: David Brownell <dbr...@us...>
Date:   Wed Oct 14 02:00:34 2009 -0700

    omap2420.cfg updates
    
    Remove ircapture/mask attributes.  Add "srst_nogate".
    
    Signed-off-by: David Brownell <dbr...@us...>

diff --git a/tcl/target/omap2420.cfg b/tcl/target/omap2420.cfg
index 866b4a3..a579866 100644
--- a/tcl/target/omap2420.cfg
+++ b/tcl/target/omap2420.cfg
@@ -8,12 +8,13 @@ if { [info exists CHIPNAME] } {
 }
 
 # NOTE: likes slowish clock on reset (1.5 MBit/s or less) or use RCLK
+reset_config srst_nogate
 
 # Subsidiary TAP:  ARM7TDMIr4 plus imaging ... must add via ICEpick (addr 6).
-jtag newtap $_CHIPNAME iva -irlen 4 -ircapture 0x1 -irmask 0x3f -disable
+jtag newtap $_CHIPNAME iva -irlen 4 -disable
 
 # Subsidiary TAP: C55x DSP ... must add via ICEpick (addr 2).
-jtag newtap $_CHIPNAME dsp -irlen 38 -ircapture 0x1 -irmask 0x3f -disable
+jtag newtap $_CHIPNAME dsp -irlen 38 -disable
 
 # Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer
 if { [info exists ETB_TAPID ] } {
@@ -21,7 +22,7 @@ if { [info exists ETB_TAPID ] } {
 } else {
    set _ETB_TAPID 0x2b900f0f
 }
-jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_ETB_TAPID
+jtag newtap $_CHIPNAME etb -irlen 4 -expected-id $_ETB_TAPID
 
 # Subsidiary TAP: ARM1136jf-s with scan chains for ARM Debug, EmbeddedICE-RT, ETM.
 if { [info exists CPU_TAPID ] } {
@@ -29,7 +30,7 @@ if { [info exists CPU_TAPID ] } {
 } else {
    set _CPU_TAPID 0x07b3602f
 }
-jtag newtap $_CHIPNAME arm -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPU_TAPID
+jtag newtap $_CHIPNAME arm -irlen 5 -expected-id $_CPU_TAPID
 
 # Primary TAP: ICEpick-B (JTAG route controller) and boundary scan
 if { [info exists JRC_TAPID ] } {
@@ -37,7 +38,7 @@ if { [info exists JRC_TAPID ] } {
 } else {
    set _JRC_TAPID 0x01ce4801
 }
-jtag newtap $_CHIPNAME jrc -irlen 2 -ircapture 0x1 -irmask 0x3 -expected-id $_JRC_TAPID
+jtag newtap $_CHIPNAME jrc -irlen 2 -expected-id $_JRC_TAPID
 
 # GDB target:  the ARM.
 set _TARGETNAME $_CHIPNAME.arm

-----------------------------------------------------------------------

Summary of changes:
 tcl/target/omap2420.cfg |   11 ++++++-----
 1 files changed, 6 insertions(+), 5 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository