Menu
▾
▴
openocd-commit
|
From: openocd-gerrit <ope...@us...> - 2024-07-13 22:29:09
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".
The branch, master has been updated
via b764fc2a4dda2dacba7e9d3dd901fc6b8b1ad34b (commit)
from 44cfdef0a40d6c5d4514a927d9e46f5c2acc1586 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit b764fc2a4dda2dacba7e9d3dd901fc6b8b1ad34b
Author: Marc Schink <de...@za...>
Date: Fri Jun 14 16:28:38 2024 +0200
tcl: Replace 'gdb_' prefix with 'gdb' command group
Change-Id: I0490b4c112c1a922bf77a4b37df2a630a8f6cea1
Signed-off-by: Marc Schink <de...@za...>
Reviewed-on: https://review.openocd.org/c/openocd/+/8337
Reviewed-by: Antonio Borneo <bor...@gm...>
Tested-by: jenkins
diff --git a/tcl/board/actux3.cfg b/tcl/board/actux3.cfg
index edb529c88..7c2ce0677 100644
--- a/tcl/board/actux3.cfg
+++ b/tcl/board/actux3.cfg
@@ -50,7 +50,7 @@ reset init
# setup to debug u-boot in flash
proc uboot_debug {} {
- gdb_breakpoint_override hard
+ gdb breakpoint_override hard
xscale vector_catch 0xFF
xscale vector_table low 1 0xe59ff018
diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg
index 85d9a35b9..5642cb1ab 100644
--- a/tcl/board/mini2440.cfg
+++ b/tcl/board/mini2440.cfg
@@ -128,7 +128,7 @@ reset_config trst_and_srst
# GDB Setup
#-------------------------------------------------------------------------
- gdb_breakpoint_override hard
+ gdb breakpoint_override hard
#------------------------------------------------
# ARM SPECIFIC
diff --git a/tcl/board/mini6410.cfg b/tcl/board/mini6410.cfg
index 18f9e8d25..276e7180e 100644
--- a/tcl/board/mini6410.cfg
+++ b/tcl/board/mini6410.cfg
@@ -95,7 +95,7 @@ adapter srst delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst
-gdb_breakpoint_override hard
+gdb breakpoint_override hard
targets
nand device $_CHIPNAME.flash s3c6400 $_CHIPNAME.cpu
diff --git a/tcl/board/or1k_generic.cfg b/tcl/board/or1k_generic.cfg
index 915a0de24..b6cf3a097 100644
--- a/tcl/board/or1k_generic.cfg
+++ b/tcl/board/or1k_generic.cfg
@@ -22,7 +22,7 @@ poll_period 1
adapter speed 3000
# Enable the target description feature
-gdb_target_description enable
+gdb target_description enable
# Add a new register in the cpu register list. This register will be
# included in the generated target descriptor file.
diff --git a/tcl/interface/vdebug.cfg b/tcl/interface/vdebug.cfg
index 7350bb9a9..116ac8a75 100644
--- a/tcl/interface/vdebug.cfg
+++ b/tcl/interface/vdebug.cfg
@@ -22,7 +22,7 @@ vdebug server $_VDEBUGHOST:$_VDEBUGPORT
# example config listen on all interfaces, disable tcl/telnet server
bindto 0.0.0.0
-#gdb_port 3333
+#gdb port 3333
#telnet_port disabled
tcl_port disabled
diff --git a/tcl/target/esi32xx.cfg b/tcl/target/esi32xx.cfg
index a8b0823da..d29c636cf 100644
--- a/tcl/target/esi32xx.cfg
+++ b/tcl/target/esi32xx.cfg
@@ -35,4 +35,4 @@ reset_config none
# The default linker scripts provided by the eSi-RISC toolchain do not
# specify attributes on memory regions, which results in incorrect
# application of software breakpoints by GDB.
-gdb_breakpoint_override hard
+gdb breakpoint_override hard
diff --git a/tcl/target/esp_common.cfg b/tcl/target/esp_common.cfg
index ac8cd6a19..e9a188f9f 100644
--- a/tcl/target/esp_common.cfg
+++ b/tcl/target/esp_common.cfg
@@ -181,7 +181,7 @@ proc configure_esp_xtensa_default_settings { } {
$_TARGETNAME_0 xtensa smpbreak BreakIn BreakOut
}
- gdb_breakpoint_override hard
+ gdb breakpoint_override hard
if { [info exists _FLASH_VOLTAGE] } {
$_TARGETNAME_0 $_CHIPNAME flashbootstrap $_FLASH_VOLTAGE
diff --git a/tcl/target/omap4430.cfg b/tcl/target/omap4430.cfg
index a448550f6..4bc7fe1bf 100644
--- a/tcl/target/omap4430.cfg
+++ b/tcl/target/omap4430.cfg
@@ -128,4 +128,4 @@ $_CHIPNAME.m30 configure -event reset-assert { }
$_CHIPNAME.m31 configure -event reset-assert { }
# Soft breakpoints don't currently work due to broken cache handling
-gdb_breakpoint_override hard
+gdb breakpoint_override hard
diff --git a/tcl/target/omap4460.cfg b/tcl/target/omap4460.cfg
index bbc824b2a..85ba96c51 100644
--- a/tcl/target/omap4460.cfg
+++ b/tcl/target/omap4460.cfg
@@ -128,4 +128,4 @@ $_CHIPNAME.m30 configure -event reset-assert { }
$_CHIPNAME.m31 configure -event reset-assert { }
# Soft breakpoints don't currently work due to broken cache handling
-gdb_breakpoint_override hard
+gdb breakpoint_override hard
diff --git a/tcl/target/omapl138.cfg b/tcl/target/omapl138.cfg
index 2d670b98a..78c456d5c 100644
--- a/tcl/target/omapl138.cfg
+++ b/tcl/target/omapl138.cfg
@@ -64,5 +64,5 @@ arm7_9 dcc_downloads enable
etm config $_TARGETNAME 16 normal full etb
etb config $_TARGETNAME $_CHIPNAME.etb
-gdb_breakpoint_override hard
+gdb breakpoint_override hard
arm7_9 dbgrq enable
diff --git a/tcl/target/rp2040.cfg b/tcl/target/rp2040.cfg
index de76b4e29..5e78c6931 100644
--- a/tcl/target/rp2040.cfg
+++ b/tcl/target/rp2040.cfg
@@ -96,7 +96,7 @@ if { $_USE_CORE == 1 } {
set _FLASH_TARGET $_TARGETNAME_0
}
# Backup the work area. The flash probe runs an algorithm on the target CPU.
-# The flash is probed during gdb connect if gdb_memory_map is enabled (by default).
+# The flash is probed during gdb connect if gdb memory_map is enabled (by default).
$_FLASH_TARGET configure -work-area-phys 0x20010000 -work-area-size $_WORKAREASIZE -work-area-backup 1
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME rp2040_flash 0x10000000 0 0 0 $_FLASH_TARGET
diff --git a/tcl/target/u8500.cfg b/tcl/target/u8500.cfg
index 417fdd18f..932ef8c20 100644
--- a/tcl/target/u8500.cfg
+++ b/tcl/target/u8500.cfg
@@ -144,7 +144,7 @@ proc enable_apetap {} {
tcl_port 5555
telnet_port 4444
-gdb_port 3333
+gdb port 3333
if { [info exists CHIPNAME] } {
global _CHIPNAME
@@ -319,7 +319,7 @@ global _MAXSPEED
adapter speed $_MAXSPEED
-gdb_breakpoint_override hard
+gdb breakpoint_override hard
set mem inaccessible-by-default-off
jtag_ntrst_delay 100
diff --git a/tcl/target/xtensa.cfg b/tcl/target/xtensa.cfg
index 561131d84..c277673e4 100644
--- a/tcl/target/xtensa.cfg
+++ b/tcl/target/xtensa.cfg
@@ -67,4 +67,4 @@ if { $_XTENSA_NUM_CORES == 1 } {
$_TARGETNAME configure -event reset-assert-post { soft_reset_halt }
}
-gdb_report_register_access_error enable
+gdb report_register_access_error enable
-----------------------------------------------------------------------
Summary of changes:
tcl/board/actux3.cfg | 2 +-
tcl/board/mini2440.cfg | 2 +-
tcl/board/mini6410.cfg | 2 +-
tcl/board/or1k_generic.cfg | 2 +-
tcl/interface/vdebug.cfg | 2 +-
tcl/target/esi32xx.cfg | 2 +-
tcl/target/esp_common.cfg | 2 +-
tcl/target/omap4430.cfg | 2 +-
tcl/target/omap4460.cfg | 2 +-
tcl/target/omapl138.cfg | 2 +-
tcl/target/rp2040.cfg | 2 +-
tcl/target/u8500.cfg | 4 ++--
tcl/target/xtensa.cfg | 2 +-
13 files changed, 14 insertions(+), 14 deletions(-)
hooks/post-receive
--
Main OpenOCD repository
|
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X