Menu
▾
▴
[PATCH]: dfa8a13864 jtag: drivers: prepare for aligning switch and case statements
|
From: <ge...@op...> - 2025-07-26 17:40:17
|
This is an automated email from Gerrit. "Antonio Borneo <bor...@gm...>" just uploaded a new patch set to Gerrit, which you can find at https://review.openocd.org/c/openocd/+/9054 -- gerrit commit dfa8a13864b3ab25afff431395585848aa308dd0 Author: Antonio Borneo <bor...@gm...> Date: Sat Jul 26 18:20:57 2025 +0200 jtag: drivers: prepare for aligning switch and case statements To prepare for aligning switch and case statements, fix in advance some checkpatch error due to existing code: - remove 'else' after return and break; - use '__func__' in place of hardcoded function name; - remove useless parenthesis; - don't end line with an open parenthesis. Change-Id: I6a9905e5a30c90456de562e727dd2dfe2fda10c4 Signed-off-by: Antonio Borneo <bor...@gm...> diff --git a/src/jtag/drivers/ft232r.c b/src/jtag/drivers/ft232r.c index f88e4b9408..8f7ae13d6c 100644 --- a/src/jtag/drivers/ft232r.c +++ b/src/jtag/drivers/ft232r.c @@ -821,11 +821,11 @@ static int syncbb_execute_queue(struct jtag_command *cmd_queue) case JTAG_RESET: LOG_DEBUG_IO("reset trst: %i srst %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst); - if ((cmd->cmd.reset->trst == 1) || - (cmd->cmd.reset->srst && - (jtag_get_reset_config() & RESET_SRST_PULLS_TRST))) { + if (cmd->cmd.reset->trst == 1 || + (cmd->cmd.reset->srst && + (jtag_get_reset_config() & RESET_SRST_PULLS_TRST))) tap_set_state(TAP_RESET); - } + ft232r_reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst); break; diff --git a/src/jtag/drivers/kitprog.c b/src/jtag/drivers/kitprog.c index 88e301cebc..2bb4d17da2 100644 --- a/src/jtag/drivers/kitprog.c +++ b/src/jtag/drivers/kitprog.c @@ -652,10 +652,9 @@ static int kitprog_swd_switch_seq(enum swd_special_seq seq) if (kitprog_swd_seq(SEQUENCE_JTAG_TO_SWD) != ERROR_OK) return ERROR_FAIL; break; - } else { - LOG_DEBUG("JTAG to SWD not supported"); - /* Fall through to fix target reset issue */ } + LOG_DEBUG("JTAG to SWD not supported"); + /* Fall through to fix target reset issue */ /* fallthrough */ case LINE_RESET: LOG_DEBUG("SWD line reset"); diff --git a/src/jtag/drivers/rlink.c b/src/jtag/drivers/rlink.c index a818996255..9622740c6b 100644 --- a/src/jtag/drivers/rlink.c +++ b/src/jtag/drivers/rlink.c @@ -332,33 +332,22 @@ static int dtc_load_from_buffer(struct libusb_device_handle *hdev_param, const u case DTCLOAD_LOAD: /* Send the DTC program to ST7 RAM. */ - usb_err = ep1_memory_write( - hdev_param, - DTC_LOAD_BUFFER, - header->length + 1, buffer - ); + usb_err = ep1_memory_write(hdev_param, DTC_LOAD_BUFFER, + header->length + 1, buffer); if (usb_err < 0) return usb_err; /* Load it into the DTC. */ - usb_err = ep1_generic_commandl( - hdev_param, 3, - EP1_CMD_DTC_LOAD, - (DTC_LOAD_BUFFER >> 8), - DTC_LOAD_BUFFER - ); + usb_err = ep1_generic_commandl(hdev_param, 3, EP1_CMD_DTC_LOAD, + (DTC_LOAD_BUFFER >> 8), DTC_LOAD_BUFFER); if (usb_err < 0) return usb_err; break; case DTCLOAD_RUN: - usb_err = ep1_generic_commandl( - hdev_param, 3, - EP1_CMD_DTC_CALL, - buffer[0], - EP1_CMD_DTC_WAIT - ); + usb_err = ep1_generic_commandl(hdev_param, 3, EP1_CMD_DTC_CALL, + buffer[0], EP1_CMD_DTC_WAIT); if (usb_err < 0) return usb_err; @@ -369,11 +358,8 @@ static int dtc_load_from_buffer(struct libusb_device_handle *hdev_param, const u break; case DTCLOAD_LUT: - usb_err = ep1_memory_write( - hdev_param, - ST7_USB_BUF_EP0OUT + lut_start, - header->length + 1, buffer - ); + usb_err = ep1_memory_write(hdev_param, + ST7_USB_BUF_EP0OUT + lut_start, header->length + 1, buffer); if (usb_err < 0) return usb_err; break; @@ -1300,7 +1286,7 @@ static int rlink_execute_queue(struct jtag_command *cmd_queue) LOG_DEBUG_IO("reset trst: %i srst %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst); - if ((cmd->cmd.reset->trst == 1) || + if (cmd->cmd.reset->trst == 1 || (cmd->cmd.reset->srst && (jtag_get_reset_config() & RESET_SRST_PULLS_TRST))) tap_set_state(TAP_RESET); diff --git a/src/jtag/drivers/ulink.c b/src/jtag/drivers/ulink.c index 417d560cde..30778a1d8b 100644 --- a/src/jtag/drivers/ulink.c +++ b/src/jtag/drivers/ulink.c @@ -528,26 +528,24 @@ static int ulink_allocate_payload(struct ulink_cmd *ulink_cmd, int size, LOG_ERROR("BUG: Duplicate payload allocation for OpenULINK command"); free(payload); return ERROR_FAIL; - } else { - ulink_cmd->payload_out = payload; - ulink_cmd->payload_out_size = size; } + ulink_cmd->payload_out = payload; + ulink_cmd->payload_out_size = size; break; case PAYLOAD_DIRECTION_IN: if (ulink_cmd->payload_in_start) { LOG_ERROR("BUG: Duplicate payload allocation for OpenULINK command"); free(payload); return ERROR_FAIL; - } else { - ulink_cmd->payload_in_start = payload; - ulink_cmd->payload_in = payload; - ulink_cmd->payload_in_size = size; - - /* By default, free payload_in_start in ulink_clear_queue(). Commands - * that do not want this behavior (e. g. split scans) must turn it off - * separately! */ - ulink_cmd->free_payload_in_start = true; } + ulink_cmd->payload_in_start = payload; + ulink_cmd->payload_in = payload; + ulink_cmd->payload_in_size = size; + + /* By default, free payload_in_start in ulink_clear_queue(). Commands + * that do not want this behavior (e. g. split scans) must turn it off + * separately! */ + ulink_cmd->free_payload_in_start = true; break; } @@ -903,7 +901,7 @@ static int ulink_append_scan_cmd(struct ulink *device, enum scan_type scan_type, ret = ulink_allocate_payload(cmd, scan_size_bytes + 5, PAYLOAD_DIRECTION_OUT); break; default: - LOG_ERROR("BUG: ulink_append_scan_cmd() encountered an unknown scan type"); + LOG_ERROR("BUG: %s() encountered an unknown scan type", __func__); ret = ERROR_FAIL; break; } @@ -1832,8 +1830,7 @@ static int ulink_post_process_scan(struct ulink_cmd *ulink_cmd) ret = ERROR_OK; break; default: - LOG_ERROR("BUG: ulink_post_process_scan() encountered an unknown" - " JTAG scan type"); + LOG_ERROR("BUG: %s() encountered an unknown JTAG scan type", __func__); ret = ERROR_FAIL; break; } @@ -1877,8 +1874,7 @@ static int ulink_post_process_queue(struct ulink *device) break; default: ret = ERROR_FAIL; - LOG_ERROR("BUG: ulink_post_process_queue() encountered unknown JTAG " - "command type"); + LOG_ERROR("BUG: %s() encountered unknown JTAG command type", __func__); break; } -- |
