[PATCH]: dd01f05287 configure.ac: show the parallel port adapter in the config summary

[<ge...@op...>]

This is an automated email from Gerrit.

"R. Diez <rdi...@rd...>" just uploaded a new patch set to Gerrit, which you can find at https://review.openocd.org/c/openocd/+/9003

-- gerrit

commit dd01f05287ddcd9f680b38d1b5ee568ed2d19064
Author: R. Diez <rdi...@rd...>
Date:   Sun Jul 20 11:18:35 2025 +0200

    configure.ac: show the parallel port adapter in the config summary
    
    Use the same processing logic as most other enable/disable options.
    
    Change-Id: I994963fdab32a09c191f2e29620c9540136f980c
    Signed-off-by: R. Diez <rdi...@rd...>

diff --git a/configure.ac b/configure.ac
index 453cbcfb5a..7ce412f57c 100644
--- a/configure.ac
+++ b/configure.ac
@@ -183,6 +183,9 @@ m4_define([PCIE_ADAPTERS],
 m4_define([SERIAL_PORT_ADAPTERS],
 	[[[buspirate], [Bus Pirate], [BUS_PIRATE]]])
 
+m4_define([PARALLEL_PORT_ADAPTER],
+	[[[parport], [PC Parallel Port], [PARPORT]]])
+
 m4_define([LINUXSPIDEV_ADAPTER],
 	[[[linuxspidev], [Linux spidev driver], [LINUXSPIDEV]]])
 m4_define([VDEBUG_ADAPTER],
@@ -330,6 +333,7 @@ AC_ARG_ADAPTERS([
   REMOTE_BITBANG_ADAPTER,
   LINUXSPIDEV_ADAPTER,
   SERIAL_PORT_ADAPTERS,
+  PARALLEL_PORT_ADAPTER,
   DUMMY_ADAPTER,
   VDEBUG_ADAPTER,
   JTAG_DPI_ADAPTER,
@@ -353,10 +357,6 @@ AC_ARG_ADAPTERS([
 AC_ARG_ADAPTERS([HOST_ARM_BITBANG_ADAPTERS],[no])
 AC_ARG_ADAPTERS([HOST_ARM_OR_AARCH64_BITBANG_ADAPTERS],[no])
 
-AC_ARG_ENABLE([parport],
-  AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]),
-  [build_parport=$enableval], [build_parport=no])
-
 AC_ARG_ENABLE([parport_ppdev],
   AS_HELP_STRING([--disable-parport-ppdev],
       [Disable use of ppdev (/dev/parportN) for parport (for x86 only)]),
@@ -496,13 +496,6 @@ AS_IF([test "x$is_darwin" = "xyes"], [
     AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
 ])
 
-AS_IF([test "x$build_parport" = "xyes"], [
-  build_bitbang=yes
-  AC_DEFINE([BUILD_PARPORT], [1], [1 if you want parport.])
-], [
-  AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.])
-])
-
 AS_IF([test "x$ADAPTER_VAR([dummy])" != "xno"], [
   build_bitbang=yes
 ])
@@ -647,6 +640,7 @@ PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_internal_libjaylink" = "xyes" -o
 PROCESS_ADAPTERS([PCIE_ADAPTERS], ["x$is_linux" = "xyes" -a "x$ac_cv_header_linux_pci_h" = "xyes"], [Linux build])
 PROCESS_ADAPTERS([SERIAL_PORT_ADAPTERS], ["x$can_build_buspirate" = "xyes"],
                                          [internal error: validation should happen beforehand])
+PROCESS_ADAPTERS([PARALLEL_PORT_ADAPTER], [true], [unused])
 PROCESS_ADAPTERS([LINUXSPIDEV_ADAPTER], ["x$is_linux" = "xyes" -a "x$ac_cv_header_linux_spi_spidev_h" = "xyes"],
                                         [Linux spidev])
 PROCESS_ADAPTERS([VDEBUG_ADAPTER], [true], [unused])
@@ -724,7 +718,6 @@ AS_IF([test "x$enable_esp_usb_jtag" != "xno"], [
 ])
 
 AM_CONDITIONAL([RELEASE], [test "x$build_release" = "xyes"])
-AM_CONDITIONAL([PARPORT], [test "x$build_parport" = "xyes"])
 AM_CONDITIONAL([GIVEIO], [test "x$parport_use_giveio" = "xyes"])
 AM_CONDITIONAL([BITBANG], [test "x$build_bitbang" = "xyes"])
 AM_CONDITIONAL([USB_BLASTER_DRIVER], [test "x$enable_usb_blaster" != "xno" -o "x$enable_usb_blaster_2" != "xno"])
@@ -841,6 +834,7 @@ m4_foreach([adapterTuple], [USB1_ADAPTERS,
 	SYSFSGPIO_ADAPTER,
 	REMOTE_BITBANG_ADAPTER,
 	LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS, SERIAL_PORT_ADAPTERS,
+	PARALLEL_PORT_ADAPTER,
 	LINUXSPIDEV_ADAPTER,
 	VDEBUG_ADAPTER,
 	JTAG_DPI_ADAPTER,

--