[PATCH]: aa7d54dd94 flash/nor/stm32lx: Add 'option_load' command

[<ge...@op...>]

This is an automated email from Gerrit.

"zapb <de...@za...>" just uploaded a new patch set to Gerrit, which you can find at https://review.openocd.org/c/openocd/+/8998

-- gerrit

commit aa7d54dd9440ec8b8c792c0065cc715cc464de25
Author: Marc Schink <de...@za...>
Date:   Mon Jul 14 07:01:58 2025 +0000

    flash/nor/stm32lx: Add 'option_load' command
    
    Add command to re-load option bytes.
    
    Change-Id: I5653f2222a48af1fe0332d4bdc3552e481e375d0
    Signed-off-by: Marc Schink <de...@za...>

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 6d607d697f..fb4664f3db 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -8255,6 +8255,12 @@ data). This is the only way to unlock a protected flash (unless RDP
 Level is 2 which can't be unlocked at all).
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
+
+@deffn {Command} {stm32lx option_load} num
+Forces a re-load of the option byte registers.
+This command will cause a system reset of the device.
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
 @end deffn
 
 @deffn {Flash Driver} {stm32l4x}
diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c
index 1459e942d1..bf283239c0 100644
--- a/src/flash/nor/stm32lx.c
+++ b/src/flash/nor/stm32lx.c
@@ -90,6 +90,7 @@ static int stm32lx_lock_program_memory(struct flash_bank *bank);
 static int stm32lx_enable_write_half_page(struct flash_bank *bank);
 static int stm32lx_erase_sector(struct flash_bank *bank, int sector);
 static int stm32lx_wait_until_bsy_clear(struct flash_bank *bank);
+static int stm32lx_obl_launch(struct flash_bank *bank);
 static int stm32lx_lock(struct flash_bank *bank);
 static int stm32lx_unlock(struct flash_bank *bank);
 static int stm32lx_mass_erase(struct flash_bank *bank);
@@ -354,6 +355,26 @@ COMMAND_HANDLER(stm32lx_handle_unlock_command)
 	return retval;
 }
 
+COMMAND_HANDLER(stm32lx_handle_option_load_command)
+{
+	if (CMD_ARGC != 1)
+		return ERROR_COMMAND_SYNTAX_ERROR;
+
+	struct flash_bank *bank;
+	int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+
+	if (retval != ERROR_OK)
+		return retval;
+
+	retval = stm32lx_obl_launch(bank);
+	if (retval != ERROR_OK) {
+		command_print(CMD, "failed to load option bytes");
+		return retval;
+	}
+
+	return ERROR_OK;
+}
+
 static int stm32lx_protect_check(struct flash_bank *bank)
 {
 	int retval;
@@ -921,6 +942,13 @@ static const struct command_registration stm32lx_exec_command_handlers[] = {
 		.usage = "bank_id",
 		.help = "Lower the readout protection from Level 1 to 0.",
 	},
+	{
+		.name = "option_load",
+		.handler = stm32lx_handle_option_load_command,
+		.mode = COMMAND_EXEC,
+		.usage = "bank_id",
+		.help = "Force re-load of device options (will cause device reset).",
+	},
 	COMMAND_REGISTRATION_DONE
 };
 

--