Menu
▾
▴
[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.12.0-656-g812fad02f
|
From: openocd-gerrit <ope...@us...> - 2024-07-13 22:30:35
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".
The branch, master has been updated
via 812fad02fee0627d917b7ba746947f06244ed3b1 (commit)
from 40a6af6eda6e12768ab4341de10f78140f925e25 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 812fad02fee0627d917b7ba746947f06244ed3b1
Author: Nishanth Menon <nm...@ti...>
Date: Thu May 16 15:49:37 2024 -0500
tcl/board: Add am62p/am62a7/j722s native swd configuration
Direct memory driver swd native configuration for am62a7, am62p and
J722S SoCs. All three share common memory map for the debug address
map, so there is a strong reuse. However, introduce board file
specific to the board to allow users to directly get started.
Change-Id: I5609925a2e9918fd4c91d9fd40fbee98de27fdbc
Signed-off-by: Nishanth Menon <nm...@ti...>
Reviewed-on: https://review.openocd.org/c/openocd/+/8283
Tested-by: jenkins
Reviewed-by: Vaishnav M A <vai...@be...>
Reviewed-by: Antonio Borneo <bor...@gm...>
Reviewed-by: Oleksij Rempel <li...@re...>
diff --git a/tcl/board/ti_am62a7_swd_native.cfg b/tcl/board/ti_am62a7_swd_native.cfg
new file mode 100644
index 000000000..99fc0b0b3
--- /dev/null
+++ b/tcl/board/ti_am62a7_swd_native.cfg
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (C) 2024 Texas Instruments Incorporated - http://www.ti.com/
+#
+# Texas Instruments AM62A7
+# Link: https://www.ti.com/product/AM62A7
+#
+# This configuration file is used as a self hosted debug configuration that
+# works on every AM62A7 platform based on firewall configuration permitted
+# in the system.
+#
+# In this system openOCD runs on one of the CPUs inside AM62A7 and provides
+# network ports that can then be used to debug the microcontrollers on the
+# SoC - either self hosted IDE OR remotely.
+
+# We are using dmem, which uses dapdirect_swd transport
+adapter driver dmem
+
+if { ![info exists SOC] } {
+ set SOC am62a7
+}
+
+source [find target/ti_k3.cfg]
diff --git a/tcl/board/ti_am62p_swd_native.cfg b/tcl/board/ti_am62p_swd_native.cfg
new file mode 100644
index 000000000..fa549f358
--- /dev/null
+++ b/tcl/board/ti_am62p_swd_native.cfg
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (C) 2024 Texas Instruments Incorporated - http://www.ti.com/
+#
+# Texas Instruments am62p
+# Link: https://www.ti.com/product/AM62P
+#
+# This configuration file is used as a self hosted debug configuration that
+# works on every AM62P platform based on firewall configuration permitted
+# in the system.
+#
+# In this system openOCD runs on one of the CPUs inside AM62P and provides
+# network ports that can then be used to debug the microcontrollers on the
+# SoC - either self hosted IDE OR remotely.
+
+# We are using dmem, which uses dapdirect_swd transport
+adapter driver dmem
+
+if { ![info exists SOC] } {
+ set SOC am62p
+}
+
+source [find target/ti_k3.cfg]
diff --git a/tcl/board/ti_j722s_swd_native.cfg b/tcl/board/ti_j722s_swd_native.cfg
new file mode 100644
index 000000000..bbe0d508c
--- /dev/null
+++ b/tcl/board/ti_j722s_swd_native.cfg
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (C) 2024 Texas Instruments Incorporated - http://www.ti.com/
+#
+# Texas Instruments J722S/AM67/TDA4VEN
+# Link: https://www.ti.com/product/AM67
+# Link: https://www.ti.com/product/TDA4VEN-Q1
+#
+# This configuration file is used as a self hosted debug configuration that
+# works on every J722S platform based on firewall configuration permitted
+# in the system.
+#
+# In this system openOCD runs on one of the CPUs inside J722S and provides
+# network ports that can then be used to debug the microcontrollers on the
+# SoC - either self hosted IDE OR remotely.
+
+# We are using dmem, which uses dapdirect_swd transport
+adapter driver dmem
+
+if { ![info exists SOC] } {
+ set SOC j722s
+}
+
+source [find target/ti_k3.cfg]
diff --git a/tcl/target/ti_k3.cfg b/tcl/target/ti_k3.cfg
index ebea82179..2ae0f75b8 100644
--- a/tcl/target/ti_k3.cfg
+++ b/tcl/target/ti_k3.cfg
@@ -209,6 +209,16 @@ switch $_soc {
# Sysctrl power-ap unlock offsets
set _sysctrl_ap_unlock_offsets {0xf0 0x78}
+ # Setup DMEM access descriptions
+ # DAPBUS (Debugger) description
+ set _dmem_base_address 0x740002000
+ set _dmem_ap_address_offset 0x100
+ set _dmem_max_aps 10
+ # Emulated AP description
+ set _dmem_emu_base_address 0x760000000
+ set _dmem_emu_base_address_map_to 0x1d500000
+ set _dmem_emu_ap_list 1
+
# Overrides for am62p
if { "$_soc" == "am62p" } {
set _K3_DAP_TAPID 0x0bb9d02f
-----------------------------------------------------------------------
Summary of changes:
.../{ti_j721e_swd_native.cfg => ti_am62a7_swd_native.cfg} | 13 +++++++------
.../{ti_am625_swd_native.cfg => ti_am62p_swd_native.cfg} | 12 ++++++------
.../{ti_am625_swd_native.cfg => ti_j722s_swd_native.cfg} | 13 +++++++------
tcl/target/ti_k3.cfg | 10 ++++++++++
4 files changed, 30 insertions(+), 18 deletions(-)
copy tcl/board/{ti_j721e_swd_native.cfg => ti_am62a7_swd_native.cfg} (58%)
copy tcl/board/{ti_am625_swd_native.cfg => ti_am62p_swd_native.cfg} (59%)
copy tcl/board/{ti_am625_swd_native.cfg => ti_j722s_swd_native.cfg} (55%)
hooks/post-receive
--
Main OpenOCD repository
|
