[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.12.0-643-ged80a182c

[openocd-gerrit <ope...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  ed80a182ceadbf7ecbc921241526335a6d5cc65e (commit)
      from  4d99e77419e34fac62e36355e7205e929c712b5c (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit ed80a182ceadbf7ecbc921241526335a6d5cc65e
Author: Marc Schink <de...@za...>
Date:   Fri Jun 14 16:37:39 2024 +0200

    tcl: Replace 'hla_' prefix with 'hla' command group
    
    Change-Id: I99ec2dc7f300352d091cf9eb807a690901c33307
    Signed-off-by: Marc Schink <de...@za...>
    Reviewed-on: https://review.openocd.org/c/openocd/+/8338
    Reviewed-by: Antonio Borneo <bor...@gm...>
    Tested-by: jenkins

diff --git a/tcl/interface/nulink.cfg b/tcl/interface/nulink.cfg
index 2a4bc0b93..48dc20e24 100644
--- a/tcl/interface/nulink.cfg
+++ b/tcl/interface/nulink.cfg
@@ -5,9 +5,9 @@
 #
 
 adapter driver hla
-hla_layout nulink
-hla_device_desc "Nu-Link"
-hla_vid_pid 0x0416 0x511b 0x0416 0x511c 0x0416 0x511d 0x0416 0x5200 0x0416 0x5201
+hla layout nulink
+hla device_desc "Nu-Link"
+hla vid_pid 0x0416 0x511b 0x0416 0x511c 0x0416 0x511d 0x0416 0x5200 0x0416 0x5201
 
 # Only swd is supported
 transport select hla_swd
diff --git a/tcl/interface/stlink.cfg b/tcl/interface/stlink.cfg
index 8578bf219..9b7f1f9eb 100644
--- a/tcl/interface/stlink.cfg
+++ b/tcl/interface/stlink.cfg
@@ -6,9 +6,9 @@
 #
 
 adapter driver hla
-hla_layout stlink
-hla_device_desc "ST-LINK"
-hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 0x0483 0x3755 0x0483 0x3757
+hla layout stlink
+hla device_desc "ST-LINK"
+hla vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 0x0483 0x3755 0x0483 0x3757
 
 # Optionally specify the serial number of ST-LINK/V2 usb device.  ST-LINK/V2
 # devices seem to have serial numbers with unreadable characters.  ST-LINK/V2
diff --git a/tcl/interface/ti-icdi.cfg b/tcl/interface/ti-icdi.cfg
index db4e1e0a0..c13d27e8b 100644
--- a/tcl/interface/ti-icdi.cfg
+++ b/tcl/interface/ti-icdi.cfg
@@ -10,8 +10,8 @@
 #
 
 adapter driver hla
-hla_layout ti-icdi
-hla_vid_pid 0x1cbe 0x00fd
+hla layout ti-icdi
+hla vid_pid 0x1cbe 0x00fd
 
 # Optionally specify the serial number of TI-ICDI devices, for when using
 # multiple devices. Serial numbers can be obtained using lsusb -v

-----------------------------------------------------------------------

Summary of changes:
 tcl/interface/nulink.cfg  | 6 +++---
 tcl/interface/stlink.cfg  | 6 +++---
 tcl/interface/ti-icdi.cfg | 4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository