From: <s.f...@bm...> - 2024-03-26 15:05:30
|
Tried to connect STlink V3PWR with CC26x2 from TI with the following command: openocd.exe -f interface/stlink-dap.cfg -c "transport select dapdirect_jtag" -c "adapter speed 1000" -f target/ti_cc26x2.cfg Open On-Chip Debugger 0.12.0 (2023-10-02) [https://github.com/sysprogs/openocd] Licensed under GNU GPL v2 libusb1 09e75e98b4d9ea7909e8837b7a3f00dda4589dc3 For bug reports, read http://openocd.org/doc/doxygen/bugs.html dapdirect_jtag adapter speed: 1000 kHz cortex_m reset_config vectreset Info : Listening on port 6666 for tcl connections Info : Listening on port 4444 for telnet connections Info : STLINK V4J2B1S0 (API v3) VID:PID 0483:3757 Info : Target voltage: 3.261539 Error: init mode failed (unable to connect to the target) Any idea whats wrong? Or is it not possible? |