Menu
▾
▴
[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.12.0-262-g886d6c3cb
|
From: openocd-gerrit <ope...@us...> - 2023-07-14 14:02:13
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".
The branch, master has been updated
via 886d6c3cbcc4c831d48790c9f1fdb02c8036f79e (commit)
from 965730dda9e1bbb18b9b954ef63ce9ed22fef73f (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 886d6c3cbcc4c831d48790c9f1fdb02c8036f79e
Author: Antonio Borneo <bor...@gm...>
Date: Mon Jul 10 11:59:27 2023 +0200
doc:usb_adapters: add lsusb dump of STLINK-V3PWR
Add USB VID:PID 0483:3755 and 0483:3757.
Change-Id: Iace29fa97f1b8e9d86078b9775561ca525635523
Signed-off-by: Antonio Borneo <bor...@gm...>
Reviewed-on: https://review.openocd.org/c/openocd/+/7768
Tested-by: jenkins
diff --git a/doc/usb_adapters/stlink/0483_3755_stlinkv3pwr.txt b/doc/usb_adapters/stlink/0483_3755_stlinkv3pwr.txt
new file mode 100644
index 000000000..6c7cd6fbf
--- /dev/null
+++ b/doc/usb_adapters/stlink/0483_3755_stlinkv3pwr.txt
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR GFDL-1.2-no-invariants-or-later
+
+# STLINK-V3PWR standalone in firmware update mode
+
+Bus 003 Device 054: ID 0483:3755 STMicroelectronics USB2.0 Hub
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 2.00
+ bDeviceClass 0
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x0483 STMicroelectronics
+ idProduct 0x3755
+ bcdDevice 1.00
+ iManufacturer 1 STMicroelectronics
+ iProduct 2 STLINK-V3PWR
+ iSerial 3 123456780000
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 0x0020
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 4 DFU Config
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 255 Vendor Specific Class
+ bInterfaceSubClass 255 Vendor Specific Subclass
+ bInterfaceProtocol 255 Vendor Specific Protocol
+ iInterface 5 ST-Link Usbloader
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x01 EP 1 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+Device Qualifier (for other device speed):
+ bLength 10
+ bDescriptorType 6
+ bcdUSB 2.00
+ bDeviceClass 0
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ bNumConfigurations 1
+Device Status: 0x0000
+ (Bus Powered)
diff --git a/doc/usb_adapters/stlink/0483_3757_stlinkv3pwr.txt b/doc/usb_adapters/stlink/0483_3757_stlinkv3pwr.txt
new file mode 100644
index 000000000..0cfd6cf58
--- /dev/null
+++ b/doc/usb_adapters/stlink/0483_3757_stlinkv3pwr.txt
@@ -0,0 +1,253 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR GFDL-1.2-no-invariants-or-later
+
+# STLINK-V3PWR standalone
+
+Bus 003 Device 053: ID 0483:3757 STMicroelectronics USB2.0 Hub
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 2.00
+ bDeviceClass 239 Miscellaneous Device
+ bDeviceSubClass 2
+ bDeviceProtocol 1 Interface Association
+ bMaxPacketSize0 64
+ idVendor 0x0483 STMicroelectronics
+ idProduct 0x3757
+ bcdDevice 1.00
+ iManufacturer 1 STMicroelectronics
+ iProduct 2 STLINK-V3PWR
+ iSerial 3 123456780000
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 0x00c2
+ bNumInterfaces 6
+ bConfigurationValue 1
+ iConfiguration 4 Default Config
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 500mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 3
+ bInterfaceClass 255 Vendor Specific Class
+ bInterfaceSubClass 255 Vendor Specific Subclass
+ bInterfaceProtocol 255 Vendor Specific Protocol
+ iInterface 5 ST-Link Debug
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x01 EP 1 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x82 EP 2 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Interface Association:
+ bLength 8
+ bDescriptorType 11
+ bFirstInterface 1
+ bInterfaceCount 2
+ bFunctionClass 2 Communications
+ bFunctionSubClass 2 Abstract (modem)
+ bFunctionProtocol 1 AT-commands (v.25ter)
+ iFunction 6 ST-Link VCP Ctrl
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 0
+ bNumEndpoints 1
+ bInterfaceClass 2 Communications
+ bInterfaceSubClass 2 Abstract (modem)
+ bInterfaceProtocol 1 AT-commands (v.25ter)
+ iInterface 6 ST-Link VCP Ctrl
+ CDC Header:
+ bcdCDC 1.10
+ CDC Call Management:
+ bmCapabilities 0x00
+ bDataInterface 2
+ CDC ACM:
+ bmCapabilities 0x06
+ sends break
+ line coding and serial state
+ CDC Union:
+ bMasterInterface 1
+ bSlaveInterface 2
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x84 EP 4 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x000a 1x 10 bytes
+ bInterval 16
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 2
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 10 CDC Data
+ bInterfaceSubClass 0
+ bInterfaceProtocol 0
+ iInterface 7 ST-Link VCP Data
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x05 EP 5 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x85 EP 5 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 3
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 255 Vendor Specific Class
+ bInterfaceSubClass 255 Vendor Specific Subclass
+ bInterfaceProtocol 255 Vendor Specific Protocol
+ iInterface 8 ST-Link Bridge
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x86 EP 6 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x06 EP 6 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Interface Association:
+ bLength 8
+ bDescriptorType 11
+ bFirstInterface 4
+ bInterfaceCount 2
+ bFunctionClass 2 Communications
+ bFunctionSubClass 2 Abstract (modem)
+ bFunctionProtocol 1 AT-commands (v.25ter)
+ iFunction 9 ST-Link VCP-PWR Ctrl
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 4
+ bAlternateSetting 0
+ bNumEndpoints 1
+ bInterfaceClass 2 Communications
+ bInterfaceSubClass 2 Abstract (modem)
+ bInterfaceProtocol 1 AT-commands (v.25ter)
+ iInterface 9 ST-Link VCP-PWR Ctrl
+ CDC Header:
+ bcdCDC 1.10
+ CDC Call Management:
+ bmCapabilities 0x00
+ bDataInterface 5
+ CDC ACM:
+ bmCapabilities 0x06
+ sends break
+ line coding and serial state
+ CDC Union:
+ bMasterInterface 4
+ bSlaveInterface 5
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x87 EP 7 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x000a 1x 10 bytes
+ bInterval 16
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 5
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 10 CDC Data
+ bInterfaceSubClass 0
+ bInterfaceProtocol 0
+ iInterface 10 ST-Link VCP-PWR Data
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x03 EP 3 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+Device Qualifier (for other device speed):
+ bLength 10
+ bDescriptorType 6
+ bcdUSB 2.00
+ bDeviceClass 0
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ bNumConfigurations 1
+Device Status: 0x0000
+ (Bus Powered)
-----------------------------------------------------------------------
Summary of changes:
...374d_stlinkv3.txt => 0483_3755_stlinkv3pwr.txt} | 18 ++++++------
...3753_stlinkv3.txt => 0483_3757_stlinkv3pwr.txt} | 34 +++++++++++-----------
2 files changed, 26 insertions(+), 26 deletions(-)
copy doc/usb_adapters/stlink/{0483_374d_stlinkv3.txt => 0483_3755_stlinkv3pwr.txt} (85%)
copy doc/usb_adapters/stlink/{0483_3753_stlinkv3.txt => 0483_3757_stlinkv3pwr.txt} (92%)
hooks/post-receive
--
Main OpenOCD repository
|
