Menu
▾
▴
[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.12.0-45-g41231db3f
|
From: openocd-gerrit <ope...@us...> - 2023-01-28 15:44:16
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".
The branch, master has been updated
via 41231db3f08150145fe7ddde53cd027e72128d4c (commit)
from 98d816ff772ffb45b1f4fbba06cb48b30ca7d98f (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 41231db3f08150145fe7ddde53cd027e72128d4c
Author: Erhan Kurubas <erh...@es...>
Date: Fri Jan 20 18:33:43 2023 +0100
doc:usb_adapters: add lsusb dump of esp_usb_jtag
Also, esp_usb_jtag added to the supported driver list of
"adapter serial" command.
Signed-off-by: Erhan Kurubas <erh...@es...>
Change-Id: Ie65cbf9b44f5de6d7995102d1a281161468f6103
Reviewed-on: https://review.openocd.org/c/openocd/+/7440
Tested-by: jenkins
Reviewed-by: Antonio Borneo <bor...@gm...>
diff --git a/doc/openocd.texi b/doc/openocd.texi
index aa1707b7d..b9ad3ff77 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2480,7 +2480,7 @@ This command is only available if your libusb1 is at least version 1.0.16.
Specifies the @var{serial_string} of the adapter to use.
If this command is not specified, serial strings are not checked.
Only the following adapter drivers use the serial string from this command:
-arm-jtag-ew, cmsis_dap, ft232r, ftdi, hla (stlink, ti-icdi), jlink, kitprog, opendus,
+arm-jtag-ew, cmsis_dap, esp_usb_jtag, ft232r, ftdi, hla (stlink, ti-icdi), jlink, kitprog, opendus,
openjtag, osbdm, presto, rlink, st-link, usb_blaster (ublast2), usbprog, vsllink, xds110.
@end deffn
diff --git a/doc/usb_adapters/esp_usb_jtag/303a_1001_esp_usb_jtag.txt b/doc/usb_adapters/esp_usb_jtag/303a_1001_esp_usb_jtag.txt
new file mode 100644
index 000000000..8da58e581
--- /dev/null
+++ b/doc/usb_adapters/esp_usb_jtag/303a_1001_esp_usb_jtag.txt
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR GFDL-1.2-no-invariants-or-later
+
+# Optional comment
+
+Bus 002 Device 035: ID 303a:1001
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 2.00
+ bDeviceClass 239 Miscellaneous Device
+ bDeviceSubClass 2
+ bDeviceProtocol 1 Interface Association
+ bMaxPacketSize0 64
+ idVendor 0x303a
+ idProduct 0x1001
+ bcdDevice 1.01
+ iManufacturer 1 Espressif
+ iProduct 2 USB JTAG/serial debug unit
+ iSerial 3 7C:DF:A1:A2:8F:38
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 0x0062
+ bNumInterfaces 3
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0xc0
+ Self Powered
+ MaxPower 500mA
+ Interface Association:
+ bLength 8
+ bDescriptorType 11
+ bFirstInterface 0
+ bInterfaceCount 2
+ bFunctionClass 2 Communications
+ bFunctionSubClass 2 Abstract (modem)
+ bFunctionProtocol 0
+ iFunction 0
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 1
+ bInterfaceClass 2 Communications
+ bInterfaceSubClass 2 Abstract (modem)
+ bInterfaceProtocol 0
+ iInterface 0
+ CDC Header:
+ bcdCDC 1.10
+ CDC ACM:
+ bmCapabilities 0x02
+ line coding and serial state
+ CDC Union:
+ bMasterInterface 0
+ bSlaveInterface 1
+ CDC Call Management:
+ bmCapabilities 0x03
+ call management
+ use DataInterface
+ bDataInterface 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x82 EP 2 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 10 CDC Data
+ bInterfaceSubClass 2
+ bInterfaceProtocol 0
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x01 EP 1 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 2
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 255 Vendor Specific Class
+ bInterfaceSubClass 255 Vendor Specific Subclass
+ bInterfaceProtocol 1
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+Device Status: 0x0001
+ Self Powered
diff --git a/doc/usb_adapters/readme.txt b/doc/usb_adapters/readme.txt
index 1d995e99f..19df4cf70 100644
--- a/doc/usb_adapters/readme.txt
+++ b/doc/usb_adapters/readme.txt
@@ -15,6 +15,7 @@ OpenOCD gerrit, as explained in HACKING.
The dumps are organized in subfolders corresponding to OpenOCD drivers:
- cmsis_dap;
+- esp_usb_jtag;
- ft232r;
- ftdi;
- icdi;
-----------------------------------------------------------------------
Summary of changes:
doc/openocd.texi | 2 +-
.../303a_1001_esp_usb_jtag.txt} | 89 ++++++++++------------
doc/usb_adapters/readme.txt | 1 +
3 files changed, 42 insertions(+), 50 deletions(-)
copy doc/usb_adapters/{cmsis_dap/2a86_8011_wch_link.txt => esp_usb_jtag/303a_1001_esp_usb_jtag.txt} (68%)
hooks/post-receive
--
Main OpenOCD repository
|
