[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.12.0-14-g228fe7300

[openocd-gerrit <ope...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  228fe7300c7df7aa05ba2c0bc19edde6d0156401 (commit)
      from  8af4d4462fb1954ab4f5d97bc0513e3082a6bb52 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 228fe7300c7df7aa05ba2c0bc19edde6d0156401
Author: Tomas Vanek <va...@fb...>
Date:   Thu Nov 3 10:32:36 2022 +0100

    tcl/target: remove rp2040-core0.cfg
    
    rp2040-core0.cfg configuration file was intended for a special adapter
    which selects a SWD multidrop target on its own. This means
    that rp2040-core0.cfg is totally unusable with a standard SWD
    adapter. The file was marked as deprecated in 0.12 release.
    
    The reworked rp2040.cfg can be restricted to use just one core:
      openocd ... -c 'set USE_CORE 0' -f target/rp2040.cfg
    
    Remove the obsoleted config.
    
    Change-Id: Id886471622bb4a8cb83f5c4c3660657407aaaf74
    Signed-off-by: Tomas Vanek <va...@fb...>
    Reviewed-on: https://review.openocd.org/c/openocd/+/7326
    Tested-by: jenkins
    Reviewed-by: Antonio Borneo <bor...@gm...>

diff --git a/tcl/target/rp2040-core0.cfg b/tcl/target/rp2040-core0.cfg
deleted file mode 100644
index 8a111bcbc..000000000
--- a/tcl/target/rp2040-core0.cfg
+++ /dev/null
@@ -1,52 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-# RP2040 is a microcontroller with dual Cortex-M0+ core.
-# https://www.raspberrypi.com/documentation/microcontrollers/rp2040.html
-
-# The device requires multidrop SWD for debug.
-# This configuration file is intended for a special adapter
-# which selects a multidrop target on its own.
-# Cannot be used with a standard SWD adapter!
-
-echo "Warn : rp2040-core0.cfg configuration file is deprecated and will be"
-echo "       removed in the next release. Use following parameters instead:"
-echo "          -c 'set USE_CORE 0' -f target/rp2040.cfg"
-
-transport select swd
-
-source [find target/swj-dp.tcl]
-
-if { [info exists CHIPNAME] } {
-	set _CHIPNAME $CHIPNAME
-} else {
-	set _CHIPNAME rp2040
-}
-
-if { [info exists WORKAREASIZE] } {
-	set _WORKAREASIZE $WORKAREASIZE
-} else {
-	set _WORKAREASIZE 0x10000
-}
-
-if { [info exists CPUTAPID] } {
-	set _CPUTAPID $CPUTAPID
-} else {
-	set _CPUTAPID 0x01002927
-}
-
-swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
-dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
-
-# Backup the work area. The flash probe runs an algorithm on the target CPU.
-# The flash is probed during gdb connect if gdb_memory_map is enabled (by default).
-$_TARGETNAME configure -work-area-phys 0x20010000 -work-area-size $_WORKAREASIZE -work-area-backup 1
-
-set _FLASHNAME $_CHIPNAME.flash
-set _FLASHSIZE 0x200000
-set _FLASHBASE 0x10000000
-flash bank $_FLASHNAME rp2040_flash $_FLASHBASE $_FLASHSIZE 1 32 $_TARGETNAME
-
-# srst does not exist; use SYSRESETREQ to perform a soft reset
-cortex_m reset_config sysresetreq

-----------------------------------------------------------------------

Summary of changes:
 tcl/target/rp2040-core0.cfg | 52 ---------------------------------------------
 1 file changed, 52 deletions(-)
 delete mode 100644 tcl/target/rp2040-core0.cfg


hooks/post-receive
-- 
Main OpenOCD repository