Menu
▾
▴
[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.12.0-1-gf8a6553e8
|
From: openocd-gerrit <ope...@us...> - 2023-01-14 23:35:36
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".
The branch, master has been updated
via f8a6553e82919bcfd37436dd6b95e99bb261d04c (commit)
via 9ea7f3d647c8ecf6b0f1424002dfc3f4504a162c (commit)
from f71b5f5a37fde4b22cd8eb379c2bc8454c636145 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit f8a6553e82919bcfd37436dd6b95e99bb261d04c
Author: Paul Fertser <fer...@gm...>
Date: Sun Jan 15 02:33:06 2023 +0300
Restore normal development cycle
Signed-off-by: Paul Fertser <fer...@gm...>
diff --git a/NEWS b/NEWS
index 208146a46..9db6c5fee 100644
--- a/NEWS
+++ b/NEWS
@@ -2,126 +2,29 @@ This file includes highlights of the changes made in the OpenOCD
source archive release.
JTAG Layer:
- * add default to adapter speed when unspecified (100 kHz)
- * AM335X gpio (BeagleBones) adapter driver
- * BCM2835 support for SWD
- * Cadence Virtual Debug (vdebug) adapter driver
- * CMSIS-DAP support for SWO and SWD multidrop
- * Espressif USB JTAG Programmer adapter driver
- * Remote bitbang support for Windows host
- * ST-LINK add TCP server support to adapter driver
- * SWD multidrop support
Boundary Scan:
Target Layer:
- * aarch64: support watchpoints
- * arm: support independent TPIU and SWO for trace
- * arm adi v5: support Large Physical Address Extension
- * arm adi v6: support added, for jtag and swd transport
- * cortex_a: support watchpoints
- * elf 64bit load support
- * Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores
- * semihosting: support user defined operations
- * Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP
Flash Layer:
- * Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support
- * GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support
- * Nuvoton NPCX series support
- * onsemi RSL10 support
- * Raspberry Pi Pico RP2040 support
- * ST BlueNRG-LPS support
- * ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support
- * ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support
Board, Target, and Interface Configuration Scripts:
- * Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config
- * Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config
- * Digilent Nexys Video board config
- * Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config
- * Espressif ESP32 via ESP USB Bridge generic board config
- * Espressif ESP32-S2 Kaluga 1 board config
- * Espressif ESP32-S2 with ESP USB Bridge board config
- * Espressif ESP32-S3 example board config
- * Kontron SMARC-sAL28 board config
- * LambdaConcept ECPIX-5 board config
- * Microchip ATSAMA5D27-SOM1-EK1 board config
- * Microchip EVB-LAN9255 board config
- * Microchip SAME51 Curiosity Nano board config
- * NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config
- * NXP RT6XX board config
- * Olimex H405 board config
- * Radiona ULX3S board config
- * Raspberry Pi 3 and Raspberry Pi 4 model B board config
- * Raspberry Pi Pico-Debug board config
- * Renesas R-Car V3U Falcon board config
- * ST BlueNRG-LPS steval-idb012v1 board config
- * ST NUCLEO-8S208RB board config
- * ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config
- * ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config
- * ST STM32MP13x-DK board config
- * TI AM625 EVM, AM642 EVM and AM654 EVM board config
- * TI J721E EVM, J721S2 EVM and J7200 EVM board config
- * Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config
- * Cadence Xtensa generic and Xtensa VDebug target config
- * Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config
- * Espressif ESP32, ESP32-S2 and ESP32-S3 target config
- * Microchip ATSAMA5D2 series target config
- * NanoXplore NG-Ultra SoC target config
- * NXP IMX8QM target config
- * NXP LS1028A, LS1046A and LS1088A target config
- * NXP RT600 (Xtensa HiFi DSP) target config
- * onsemi RSL10 target config
- * Raspberry Pi Pico RP2040 target config
- * Renesas R8A779A0 V3U target config
- * Renesas RZ/Five target config
- * Renesas RZ/G2 MPU family target config
- * Rockchip RK3399 target config
- * ST BlueNRG-LPS target config
- * ST STM32MP13x target config
- * TI AM625, AM654, J721E and J721S2 target config
- * Ashling Opella-LD interface config
- * Aspeed AST2600 linuxgpiod based interface config
- * Blinkinlabs JTAG_Hat interface config
- * Cadence Virtual Debug (vdebug) interface config
- * Espressif ESP32-S2 Kaluga 1 board's interface config
- * Espressif USB Bridge jtag interface config
- * Infineon DAP miniWiggler V3 interface config
- * PLS SPC5 interface config
- * Tigard interface config
- * Lattice MachXO3 family FPGA config
Server Layer:
- * GDB: add per-target remote protocol extensions
- * GDB: more 'Z' packets support
- * IPDBG JtagHost server functionality
- * semihosting: I/O redirection to TCP server
- * telnet: support for command's autocomplete
RTOS:
- * 'none' rtos support
- * Zephyr rtos support
Documentation:
Build and Release:
- * Add json extension to jimtcl build
- * Drop dependency from libusb0
- * Drop repository repo.or.cz for submodules
- * Move gerrit to https://review.openocd.org/
- * Require autoconf 2.69 or newer
- * Update jep106 to revision JEP106BF.01
- * Update jimtcl to version 0.81
- * Update libjaylink to version 0.3.1
- * New configure flag '--enable-jimtcl-maintainer' for jimtcl build
This release also contains a number of other important functional and
cosmetic bugfixes. For more details about what has changed since the
last release, see the git repository history:
-http://sourceforge.net/p/openocd/code/ci/v0.12.0/log/?path=
+http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path=
For older NEWS, see the NEWS files associated with each release
diff --git a/NEWS b/NEWS-0.12.0
similarity index 100%
copy from NEWS
copy to NEWS-0.12.0
diff --git a/configure.ac b/configure.ac
index eee42d424..7f0955f13 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-or-later
AC_PREREQ([2.69])
-AC_INIT([openocd], [0.12.0],
+AC_INIT([openocd], [0.12.0+dev],
[OpenOCD Mailing List <ope...@li...>])
AC_CONFIG_SRCDIR([src/openocd.c])
AC_CONFIG_AUX_DIR([build-aux])
commit 9ea7f3d647c8ecf6b0f1424002dfc3f4504a162c
Author: Paul Fertser <fer...@gm...>
Date: Sat Jan 14 23:14:31 2023 +0300
The openocd-0.12.0 release
Signed-off-by: Paul Fertser <fer...@gm...>
diff --git a/NEWS b/NEWS
index 4ebb831ce..208146a46 100644
--- a/NEWS
+++ b/NEWS
@@ -121,7 +121,7 @@ This release also contains a number of other important functional and
cosmetic bugfixes. For more details about what has changed since the
last release, see the git repository history:
-http://sourceforge.net/p/openocd/code/ci/v0.12.0-rc3/log/?path=
+http://sourceforge.net/p/openocd/code/ci/v0.12.0/log/?path=
For older NEWS, see the NEWS files associated with each release
diff --git a/configure.ac b/configure.ac
index a8535213d..eee42d424 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-or-later
AC_PREREQ([2.69])
-AC_INIT([openocd], [0.12.0-rc3+dev],
+AC_INIT([openocd], [0.12.0],
[OpenOCD Mailing List <ope...@li...>])
AC_CONFIG_SRCDIR([src/openocd.c])
AC_CONFIG_AUX_DIR([build-aux])
-----------------------------------------------------------------------
Summary of changes:
NEWS | 99 +----------------------------------------------------
NEWS => NEWS-0.12.0 | 2 +-
configure.ac | 2 +-
3 files changed, 3 insertions(+), 100 deletions(-)
copy NEWS => NEWS-0.12.0 (98%)
hooks/post-receive
--
Main OpenOCD repository
|
