Menu
▾
▴
[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.12.0-rc1-46-g45c9e1e8c
|
From: OpenOCD-Gerrit <ope...@us...> - 2022-10-15 15:58:02
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".
The branch, master has been updated
via 45c9e1e8c0809bc4305f269db239641151c6004d (commit)
from 48317d86d3c45a855edfd4e7a86c8c6a8a5ac798 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 45c9e1e8c0809bc4305f269db239641151c6004d
Author: Erhan Kurubas <erh...@es...>
Date: Tue Oct 4 23:23:55 2022 +0200
tcl/xtensa: some fixes at xtensa-core-esp32s3.cfg
Some config changes required to run ESP32-S3 with full feature set
Signed-off-by: Erhan Kurubas <erh...@es...>
Change-Id: I38022bb5ff5830e1cf9d11d6fe795ea99d91e9db
Reviewed-on: https://review.openocd.org/c/openocd/+/7254
Tested-by: jenkins
Reviewed-by: Ian Thompson <ia...@ca...>
Reviewed-by: Antonio Borneo <bor...@gm...>
diff --git a/tcl/target/xtensa-core-esp32s3.cfg b/tcl/target/xtensa-core-esp32s3.cfg
index f5c1cb3ee..b3f20e39d 100644
--- a/tcl/target/xtensa-core-esp32s3.cfg
+++ b/tcl/target/xtensa-core-esp32s3.cfg
@@ -20,6 +20,7 @@ xtensa xtmem irom 0x40000000 0x60000
xtensa xtmem iram 0x40370000 0x70000
xtensa xtmem iram 0x600FE000 0x2000
xtensa xtmem drom 0x3C000000 0x1000000
+xtensa xtmem drom 0x3FF00000 0x20000
xtensa xtmem dram 0x3FC88000 0x78000
xtensa xtmem dram 0x600FE000 0x2000
xtensa xtmem dram 0x50000000 0x2000
@@ -31,8 +32,8 @@ xtensa xtmem dram 0x60000000 0x10000000
xtensa xtopt debuglevel 6
xtensa xtopt ibreaknum 2
xtensa xtopt dbreaknum 2
-xtensa xtopt tracemem 16384
-xtensa xtopt tracememrev 1
+xtensa xtopt tracemem 0x4000
+xtensa xtopt tracememrev 0
xtensa xtopt perfcount 2
@@ -43,7 +44,7 @@ xtensa xtopt perfcount 2
# in "Read General Registers" (g-packet) requests.
# NOTE: For contiguous format, registers listed in GDB order.
# xtregs: Total number of Xtensa registers in the system
-xtensa xtregs 244
+xtensa xtregs 228
xtensa xtregfmt contiguous 128
xtensa xtreg pc 0x0020
xtensa xtreg ar0 0x0100
@@ -128,10 +129,7 @@ xtensa xtreg m0 0x0220
xtensa xtreg m1 0x0221
xtensa xtreg m2 0x0222
xtensa xtreg m3 0x0223
-
-# TODO: update gpioout address while testing on S3 HW
-xtensa xtreg gpioout 0x02f4
-
+xtensa xtreg gpio_out 0x030c
xtensa xtreg f0 0x0030
xtensa xtreg f1 0x0031
xtensa xtreg f2 0x0032
@@ -150,35 +148,32 @@ xtensa xtreg f14 0x003e
xtensa xtreg f15 0x003f
xtensa xtreg fcr 0x03e8
xtensa xtreg fsr 0x03e9
-
-# TODO: update TIE state
-xtensa xtreg accx_0 0x02f4
-xtensa xtreg accx_1 0x02f4
-xtensa xtreg qacc_h_0 0x02f4
-xtensa xtreg qacc_h_1 0x02f4
-xtensa xtreg qacc_h_2 0x02f4
-xtensa xtreg qacc_h_3 0x02f4
-xtensa xtreg qacc_h_4 0x02f4
-xtensa xtreg qacc_l_0 0x02f4
-xtensa xtreg qacc_l_1 0x02f4
-xtensa xtreg qacc_l_2 0x02f4
-xtensa xtreg qacc_l_3 0x02f4
-xtensa xtreg qacc_l_4 0x02f4
-xtensa xtreg sar_byte 0x02f4
-xtensa xtreg fft_bit_width 0x02f4
-xtensa xtreg ua_state_0 0x02f4
-xtensa xtreg ua_state_1 0x02f4
-xtensa xtreg ua_state_2 0x02f4
-xtensa xtreg ua_state_3 0x02f4
-xtensa xtreg q0 0x02f4
-xtensa xtreg q1 0x02f4
-xtensa xtreg q2 0x02f4
-xtensa xtreg q3 0x02f4
-xtensa xtreg q4 0x02f4
-xtensa xtreg q5 0x02f4
-xtensa xtreg q6 0x02f4
-xtensa xtreg q7 0x02f4
-
+xtensa xtreg accx_0 0x0300
+xtensa xtreg accx_1 0x0301
+xtensa xtreg qacc_h_0 0x0302
+xtensa xtreg qacc_h_1 0x0303
+xtensa xtreg qacc_h_2 0x0304
+xtensa xtreg qacc_h_3 0x0305
+xtensa xtreg qacc_h_4 0x0306
+xtensa xtreg qacc_l_0 0x0307
+xtensa xtreg qacc_l_1 0x0308
+xtensa xtreg qacc_l_2 0x0309
+xtensa xtreg qacc_l_3 0x030a
+xtensa xtreg qacc_l_4 0x030b
+xtensa xtreg sar_byte 0x030d
+xtensa xtreg fft_bit_width 0x030e
+xtensa xtreg ua_state_0 0x030f
+xtensa xtreg ua_state_1 0x0310
+xtensa xtreg ua_state_2 0x0311
+xtensa xtreg ua_state_3 0x0312
+xtensa xtreg q0 0x1008
+xtensa xtreg q1 0x1009
+xtensa xtreg q2 0x100a
+xtensa xtreg q3 0x100b
+xtensa xtreg q4 0x100c
+xtensa xtreg q5 0x100d
+xtensa xtreg q6 0x100e
+xtensa xtreg q7 0x100f
xtensa xtreg mmid 0x0259
xtensa xtreg ibreakenable 0x0260
xtensa xtreg memctl 0x0261
@@ -231,38 +226,38 @@ xtensa xtreg misc0 0x02f4
xtensa xtreg misc1 0x02f5
xtensa xtreg misc2 0x02f6
xtensa xtreg misc3 0x02f7
-xtensa xtreg pwrctl 0x2025
-xtensa xtreg pwrstat 0x2026
-xtensa xtreg eristat 0x2027
-xtensa xtreg cs_itctrl 0x2028
-xtensa xtreg cs_claimset 0x2029
-xtensa xtreg cs_claimclr 0x202a
-xtensa xtreg cs_lockaccess 0x202b
-xtensa xtreg cs_lockstatus 0x202c
-xtensa xtreg cs_authstatus 0x202d
-xtensa xtreg fault_info 0x203c
-xtensa xtreg trax_id 0x203d
-xtensa xtreg trax_control 0x203e
-xtensa xtreg trax_status 0x203f
-xtensa xtreg trax_data 0x2040
-xtensa xtreg trax_address 0x2041
-xtensa xtreg trax_pctrigger 0x2042
-xtensa xtreg trax_pcmatch 0x2043
-xtensa xtreg trax_delay 0x2044
-xtensa xtreg trax_memstart 0x2045
-xtensa xtreg trax_memend 0x2046
-xtensa xtreg pmg 0x2054
-xtensa xtreg pmpc 0x2055
-xtensa xtreg pm0 0x2056
-xtensa xtreg pm1 0x2057
-xtensa xtreg pmctrl0 0x2058
-xtensa xtreg pmctrl1 0x2059
-xtensa xtreg pmstat0 0x205a
-xtensa xtreg pmstat1 0x205b
-xtensa xtreg ocdid 0x205c
-xtensa xtreg ocd_dcrclr 0x205d
-xtensa xtreg ocd_dcrset 0x205e
-xtensa xtreg ocd_dsr 0x205f
+xtensa xtreg pwrctl 0x2028
+xtensa xtreg pwrstat 0x2029
+xtensa xtreg eristat 0x202a
+xtensa xtreg cs_itctrl 0x202b
+xtensa xtreg cs_claimset 0x202c
+xtensa xtreg cs_claimclr 0x202d
+xtensa xtreg cs_lockaccess 0x202e
+xtensa xtreg cs_lockstatus 0x202f
+xtensa xtreg cs_authstatus 0x2030
+xtensa xtreg fault_info 0x203f
+xtensa xtreg trax_id 0x2040
+xtensa xtreg trax_control 0x2041
+xtensa xtreg trax_status 0x2042
+xtensa xtreg trax_data 0x2043
+xtensa xtreg trax_address 0x2044
+xtensa xtreg trax_pctrigger 0x2045
+xtensa xtreg trax_pcmatch 0x2046
+xtensa xtreg trax_delay 0x2047
+xtensa xtreg trax_memstart 0x2048
+xtensa xtreg trax_memend 0x2049
+xtensa xtreg pmg 0x2057
+xtensa xtreg pmpc 0x2058
+xtensa xtreg pm0 0x2059
+xtensa xtreg pm1 0x205a
+xtensa xtreg pmctrl0 0x205b
+xtensa xtreg pmctrl1 0x205c
+xtensa xtreg pmstat0 0x205d
+xtensa xtreg pmstat1 0x205e
+xtensa xtreg ocdid 0x205f
+xtensa xtreg ocd_dcrclr 0x2060
+xtensa xtreg ocd_dcrset 0x2061
+xtensa xtreg ocd_dsr 0x2062
xtensa xtreg a0 0x0000
xtensa xtreg a1 0x0001
xtensa xtreg a2 0x0002
@@ -279,19 +274,3 @@ xtensa xtreg a12 0x000c
xtensa xtreg a13 0x000d
xtensa xtreg a14 0x000e
xtensa xtreg a15 0x000f
-xtensa xtreg b0 0x0010
-xtensa xtreg b1 0x0011
-xtensa xtreg b2 0x0012
-xtensa xtreg b3 0x0013
-xtensa xtreg b4 0x0014
-xtensa xtreg b5 0x0015
-xtensa xtreg b6 0x0016
-xtensa xtreg b7 0x0017
-xtensa xtreg b8 0x0018
-xtensa xtreg b9 0x0019
-xtensa xtreg b10 0x001a
-xtensa xtreg b11 0x001b
-xtensa xtreg b12 0x001c
-xtensa xtreg b13 0x001d
-xtensa xtreg b14 0x001e
-xtensa xtreg b15 0x001f
-----------------------------------------------------------------------
Summary of changes:
tcl/target/xtensa-core-esp32s3.cfg | 147 ++++++++++++++++---------------------
1 file changed, 63 insertions(+), 84 deletions(-)
hooks/post-receive
--
Main OpenOCD repository
|
