[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.11.0-501-g4626af440

[OpenOCD-Gerrit <ope...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  4626af440122272a6c18ad293edc81d3051d83ec (commit)
      from  55159ea2e523989a8edcc930a4f01192131bb9d4 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 4626af440122272a6c18ad293edc81d3051d83ec
Author: Antonio Borneo <bor...@gm...>
Date:   Thu Nov 18 12:29:49 2021 +0100

    doc: fix typos in commands definition
    
    Change-Id: Ie07260f229c6bd227bae0bf3dd97d29bf84c72ec
    Signed-off-by: Antonio Borneo <bor...@gm...>
    Reviewed-on: https://review.openocd.org/c/openocd/+/6725
    Tested-by: jenkins
    Reviewed-by: Tomas Vanek <va...@fb...>

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 9ff2e2e52..0ab4b36ac 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2833,7 +2833,7 @@ Reset the current configuration.
 @deffn {Command} {jlink config write}
 Write the current configuration to the internal persistent storage.
 @end deffn
-@deffn {Command} {jlink emucom write <channel> <data>}
+@deffn {Command} {jlink emucom write} <channel> <data>
 Write data to an EMUCOM channel. The data needs to be encoded as hexadecimal
 pairs.
 
@@ -2843,7 +2843,7 @@ the EMUCOM channel 0x10:
 > jlink emucom write 0x10 aa0b23
 @end example
 @end deffn
-@deffn {Command} {jlink emucom read <channel> <length>}
+@deffn {Command} {jlink emucom read} <channel> <length>
 Read data from an EMUCOM channel. The read data is encoded as hexadecimal
 pairs.
 
@@ -7206,7 +7206,7 @@ as per the following example.
 flash bank $_FLASHNAME stm32f2x 0x1FFF7800 0 0 0 $_TARGETNAME
 @end example
 
-@deffn {Command} {stm32f2x otp } num (@option{enable}|@option{disable}|@option{show})
+@deffn {Command} {stm32f2x otp} num (@option{enable}|@option{disable}|@option{show})
 Enables or disables OTP write commands for bank @var{num}.
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
@@ -7643,7 +7643,7 @@ Some tms470-specific commands are defined:
 Saves programming keys in a register, to enable flash erase and write commands.
 @end deffn
 
-@deffn {Command} {tms470 osc_mhz} clock_mhz
+@deffn {Command} {tms470 osc_megahertz} clock_mhz
 Reports the clock speed, which is used to calculate timings.
 @end deffn
 
@@ -8678,7 +8678,7 @@ If the control block location is not known, OpenOCD starts searching for it.
 Stop RTT.
 @end deffn
 
-@deffn {Command} {rtt polling_interval [interval]}
+@deffn {Command} {rtt polling_interval} [interval]
 Display the polling interval.
 If @var{interval} is provided, set the polling interval.
 The polling interval determines (in milliseconds) how often the up-channels are
@@ -9026,7 +9026,7 @@ Enable (@option{on}) or disable (@option{off}) the CTI.
 Displays a register dump of the CTI.
 @end deffn
 
-@deffn {Command} {$cti_name write } @var{reg_name} @var{value}
+@deffn {Command} {$cti_name write} @var{reg_name} @var{value}
 Write @var{value} to the CTI register with the symbolic name @var{reg_name}.
 @end deffn
 
@@ -9533,7 +9533,7 @@ cores @emph{except the ARM1176} use the same six bits.
 display information about target caches
 @end deffn
 
-@deffn {Command} {cortex_a dacrfixup [@option{on}|@option{off}]}
+@deffn {Command} {cortex_a dacrfixup} [@option{on}|@option{off}]
 Work around issues with software breakpoints when the program text is
 mapped read-only by the operating system. This option sets the CP15 DACR
 to "all-manager" to bypass MMU permission checks on memory access.
@@ -9571,12 +9571,12 @@ possible (4096) entries are printed.
 @subsection ARMv7-R specific commands
 @cindex Cortex-R
 
-@deffn {Command} {cortex_r dbginit}
+@deffn {Command} {cortex_r4 dbginit}
 Initialize core debug
 Enables debug by unlocking the Software Lock and clearing sticky powerdown indications
 @end deffn
 
-@deffn {Command} {cortex_r maskisr} [@option{on}|@option{off}]
+@deffn {Command} {cortex_r4 maskisr} [@option{on}|@option{off}]
 Selects whether interrupts will be processed when single stepping
 @end deffn
 

-----------------------------------------------------------------------

Summary of changes:
 doc/openocd.texi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository