Menu
▾
▴
[PATCH]: 195a0f8 tcl: Adapt config files to new ftdi command syntax
|
From: <ge...@op...> - 2021-06-27 10:36:46
|
This is an automated email from Gerrit. Marc Schink (de...@za...) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/6333 -- gerrit commit 195a0f87946d1aa9188b3f07fcbb61508bb14e0e Author: Marc Schink <de...@za...> Date: Wed Jun 23 20:54:49 2021 +0200 tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <de...@za...> diff --git a/tcl/board/digilent_analog_discovery.cfg b/tcl/board/digilent_analog_discovery.cfg index 954e540..64cdacf 100644 --- a/tcl/board/digilent_analog_discovery.cfg +++ b/tcl/board/digilent_analog_discovery.cfg @@ -8,10 +8,10 @@ # adapter driver ftdi -ftdi_device_desc "Digilent USB Device" -ftdi_vid_pid 0x0403 0x6014 +ftdi device_desc "Digilent USB Device" +ftdi vid_pid 0x0403 0x6014 -ftdi_layout_init 0x8008 0x800b +ftdi layout_init 0x8008 0x800b adapter speed 25000 diff --git a/tcl/board/digilent_nexys_video.cfg b/tcl/board/digilent_nexys_video.cfg index f171e24..b60ec91 100644 --- a/tcl/board/digilent_nexys_video.cfg +++ b/tcl/board/digilent_nexys_video.cfg @@ -6,19 +6,19 @@ adapter driver ftdi adapter speed 30000 -ftdi_device_desc "Digilent USB Device" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Digilent USB Device" +ftdi vid_pid 0x0403 0x6010 # channel 0 is dedicated for Digilent's DPTI Interface # channel 1 is used for JTAG -ftdi_channel 1 +ftdi channel 1 # just TCK TDI TDO TMS, no reset -ftdi_layout_init 0x0088 0x008b +ftdi layout_init 0x0088 0x008b reset_config none # Enable sampling on falling edge for high JTAG speeds. -ftdi_tdo_sample_edge falling +ftdi tdo_sample_edge falling transport select jtag diff --git a/tcl/board/dp_busblaster_v3.cfg b/tcl/board/dp_busblaster_v3.cfg index a9974d9..b94b43a 100644 --- a/tcl/board/dp_busblaster_v3.cfg +++ b/tcl/board/dp_busblaster_v3.cfg @@ -8,6 +8,6 @@ # source [find interface/ftdi/dp_busblaster.cfg] -ftdi_channel 1 +ftdi channel 1 jtag newtap xc2c32a tap -expected-id 0x06e1c093 -irlen 8 diff --git a/tcl/board/dp_busblaster_v4.cfg b/tcl/board/dp_busblaster_v4.cfg index 7b3bee8..2c2f0e9 100644 --- a/tcl/board/dp_busblaster_v4.cfg +++ b/tcl/board/dp_busblaster_v4.cfg @@ -14,6 +14,6 @@ # source [find interface/ftdi/dp_busblaster.cfg] -ftdi_channel 1 +ftdi channel 1 jtag newtap xc2c64a tap -expected-id 0x06e5c093 -irlen 8 diff --git a/tcl/board/gumstix-aerocore.cfg b/tcl/board/gumstix-aerocore.cfg index f0103ed..565df4c 100644 --- a/tcl/board/gumstix-aerocore.cfg +++ b/tcl/board/gumstix-aerocore.cfg @@ -1,10 +1,10 @@ # JTAG for the STM32F4x chip used on the Gumstix AeroCore is available on # the first interface of a Quad FTDI chip. nTRST is bit 4. adapter driver ftdi -ftdi_vid_pid 0x0403 0x6011 +ftdi vid_pid 0x0403 0x6011 -ftdi_layout_init 0x0000 0x001b -ftdi_layout_signal nTRST -data 0x0010 +ftdi layout_init 0x0000 0x001b +ftdi layout_signal nTRST -data 0x0010 source [find target/stm32f4x.cfg] reset_config trst_only diff --git a/tcl/board/kasli.cfg b/tcl/board/kasli.cfg index d492249..7cfdcf2 100644 --- a/tcl/board/kasli.cfg +++ b/tcl/board/kasli.cfg @@ -1,8 +1,8 @@ adapter driver ftdi -ftdi_device_desc "Quad RS232-HS" -ftdi_vid_pid 0x0403 0x6011 -ftdi_channel 0 -ftdi_layout_init 0x0008 0x000b +ftdi device_desc "Quad RS232-HS" +ftdi vid_pid 0x0403 0x6011 +ftdi channel 0 +ftdi layout_init 0x0008 0x000b # adapter usb location 1:8 reset_config none diff --git a/tcl/board/kindle2.cfg b/tcl/board/kindle2.cfg index a39f15c..71dca74 100644 --- a/tcl/board/kindle2.cfg +++ b/tcl/board/kindle2.cfg @@ -37,7 +37,7 @@ jtag_ntrst_delay 30 arm11 memwrite burst disable adapter speed 1000 -ftdi_tdo_sample_edge falling +ftdi tdo_sample_edge falling proc kindle2_init {} { imx3x_reset diff --git a/tcl/board/nds32_corvettef1.cfg b/tcl/board/nds32_corvettef1.cfg index cec1723..7300ce0 100644 --- a/tcl/board/nds32_corvettef1.cfg +++ b/tcl/board/nds32_corvettef1.cfg @@ -7,12 +7,12 @@ adapter speed 10000 adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0c08 0x0f1b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_init 0x0c08 0x0f1b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 reset_config srst_only source [find target/nds32v5.cfg] diff --git a/tcl/board/numato_mimas_a7.cfg b/tcl/board/numato_mimas_a7.cfg index d4012ba..12df891 100644 --- a/tcl/board/numato_mimas_a7.cfg +++ b/tcl/board/numato_mimas_a7.cfg @@ -8,13 +8,13 @@ # Therefore, prefer external power supply. adapter driver ftdi -ftdi_device_desc "Mimas Artix 7 FPGA Module" -ftdi_vid_pid 0x2a19 0x1009 +ftdi device_desc "Mimas Artix 7 FPGA Module" +ftdi vid_pid 0x2a19 0x1009 # channel 0 is for custom purpose by users (like uart, fifo etc) # channel 1 is reserved for JTAG (by-default) or SPI (possible via changing solder jumpers) -ftdi_channel 1 -ftdi_tdo_sample_edge falling +ftdi channel 1 +ftdi tdo_sample_edge falling # FTDI Pin Layout @@ -28,7 +28,7 @@ ftdi_tdo_sample_edge falling # OE_N is JTAG buffer output enable signal (active-low) # PROG_B is not used, so left as input to FTDI. # -ftdi_layout_init 0x0008 0x004b +ftdi layout_init 0x0008 0x004b reset_config none adapter speed 30000 diff --git a/tcl/board/quark_d2000_refboard.cfg b/tcl/board/quark_d2000_refboard.cfg index 8b8314a..a89895d 100644 --- a/tcl/board/quark_d2000_refboard.cfg +++ b/tcl/board/quark_d2000_refboard.cfg @@ -2,11 +2,11 @@ # the board has an onboard FTDI FT232H chip adapter driver ftdi -ftdi_vid_pid 0x0403 0x6014 -ftdi_channel 0 +ftdi vid_pid 0x0403 0x6014 +ftdi channel 0 -ftdi_layout_init 0x0000 0x030b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0100 +ftdi layout_init 0x0000 0x030b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0100 source [find target/quark_d20xx.cfg] diff --git a/tcl/board/sayma_amc.cfg b/tcl/board/sayma_amc.cfg index 64c0854..0bd76ba 100644 --- a/tcl/board/sayma_amc.cfg +++ b/tcl/board/sayma_amc.cfg @@ -11,19 +11,19 @@ # which features an Artix 7 FPGA. adapter driver ftdi -ftdi_device_desc "Quad RS232-HS" -ftdi_vid_pid 0x0403 0x6011 -ftdi_channel 0 +ftdi device_desc "Quad RS232-HS" +ftdi vid_pid 0x0403 0x6011 +ftdi channel 0 # Use this to distinguish multiple boards by topology #adapter usb location 5:1 # sampling on falling edge generally seems to work and accelerates things but # is not fully tested -#ftdi_tdo_sample_edge falling +#ftdi tdo_sample_edge falling # EN_USB_JTAG on ADBUS7: out, high # USB_nTRST on ADBUS4: out, high, but R46 is DNP -ftdi_layout_init 0x0098 0x008b -#ftdi_layout_signal EN_USB -data 0x0080 -#ftdi_layout_signal nTRST -data 0x0010 +ftdi layout_init 0x0098 0x008b +#ftdi layout_signal EN_USB -data 0x0080 +#ftdi layout_signal nTRST -data 0x0010 reset_config none adapter speed 5000 diff --git a/tcl/board/sifive-e31arty.cfg b/tcl/board/sifive-e31arty.cfg index b7a255e..8e701f1 100644 --- a/tcl/board/sifive-e31arty.cfg +++ b/tcl/board/sifive-e31arty.cfg @@ -14,8 +14,8 @@ $_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work- flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000 init if {[ info exists pulse_srst]} { - ftdi_set_signal nSRST 0 - ftdi_set_signal nSRST z + ftdi set_signal nSRST 0 + ftdi set_signal nSRST z } halt flash protect 0 64 last off diff --git a/tcl/board/sifive-e51arty.cfg b/tcl/board/sifive-e51arty.cfg index 20ad575..a543987 100644 --- a/tcl/board/sifive-e51arty.cfg +++ b/tcl/board/sifive-e51arty.cfg @@ -14,8 +14,8 @@ $_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work- flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000 init if {[ info exists pulse_srst]} { - ftdi_set_signal nSRST 0 - ftdi_set_signal nSRST z + ftdi set_signal nSRST 0 + ftdi set_signal nSRST z } halt flash protect 0 64 last off diff --git a/tcl/board/sifive-hifive1.cfg b/tcl/board/sifive-hifive1.cfg index 196f540..c47485b 100644 --- a/tcl/board/sifive-hifive1.cfg +++ b/tcl/board/sifive-hifive1.cfg @@ -1,15 +1,15 @@ adapter speed 10000 adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0008 0x001b -ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020 +ftdi layout_init 0x0008 0x001b +ftdi layout_signal nSRST -oe 0x0020 -data 0x0020 #Reset Stretcher logic on FE310 is ~1 second long #This doesn't apply if you use -# ftdi_set_signal, but still good to document +# ftdi set_signal, but still good to document #adapter srst delay 1500 set _CHIPNAME riscv @@ -23,8 +23,8 @@ flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME init #reset -- This type of reset is not implemented yet if {[ info exists pulse_srst]} { - ftdi_set_signal nSRST 0 - ftdi_set_signal nSRST z + ftdi set_signal nSRST 0 + ftdi set_signal nSRST z #Wait for the reset stretcher #It will work without this, but #will incur lots of delays for later commands. diff --git a/tcl/board/ti_tmdx570ls20susb.cfg b/tcl/board/ti_tmdx570ls20susb.cfg index 87cab26..e71136c 100644 --- a/tcl/board/ti_tmdx570ls20susb.cfg +++ b/tcl/board/ti_tmdx570ls20susb.cfg @@ -12,5 +12,5 @@ reset_config trst_only # xds100v2 config says add this to the end init -ftdi_set_signal PWR_RST 1 +ftdi set_signal PWR_RST 1 jtag arp_init diff --git a/tcl/interface/ftdi/100ask-openjtag.cfg b/tcl/interface/ftdi/100ask-openjtag.cfg index 3cbd37e..a12df97 100644 --- a/tcl/interface/ftdi/100ask-openjtag.cfg +++ b/tcl/interface/ftdi/100ask-openjtag.cfg @@ -8,9 +8,9 @@ # adapter driver ftdi -ftdi_device_desc "USB<=>JTAG&RS232" -ftdi_vid_pid 0x1457 0x5118 +ftdi device_desc "USB<=>JTAG&RS232" +ftdi vid_pid 0x1457 0x5118 -ftdi_layout_init 0x0f08 0x0f1b -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_init 0x0f08 0x0f1b +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 diff --git a/tcl/interface/ftdi/axm0432.cfg b/tcl/interface/ftdi/axm0432.cfg index 6cc1752..84b77a6 100644 --- a/tcl/interface/ftdi/axm0432.cfg +++ b/tcl/interface/ftdi/axm0432.cfg @@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "Symphony SoundBite" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Symphony SoundBite" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0c08 0x0c2b -ftdi_layout_signal nTRST -data 0x0800 -ftdi_layout_signal nSRST -data 0x0400 +ftdi layout_init 0x0c08 0x0c2b +ftdi layout_signal nTRST -data 0x0800 +ftdi layout_signal nSRST -data 0x0400 diff --git a/tcl/interface/ftdi/c232hm.cfg b/tcl/interface/ftdi/c232hm.cfg index 27cf766..25fcae1 100644 --- a/tcl/interface/ftdi/c232hm.cfg +++ b/tcl/interface/ftdi/c232hm.cfg @@ -14,18 +14,18 @@ # http://www.ftdichip.com/Support/Documents/AppNotes/AN_129_FTDI_Hi_Speed_USB_To_JTAG_Example.pdf adapter driver ftdi -#ftdi_device_desc "C232HM-DDHSL-0" -#ftdi_device_desc "C232HM-EDHSL-0" +#ftdi device_desc "C232HM-DDHSL-0" +#ftdi device_desc "C232HM-EDHSL-0" # Common PID for FT232H -ftdi_vid_pid 0x0403 0x6014 +ftdi vid_pid 0x0403 0x6014 # Layout # High data byte 0x40 configures red LED on ACBUS6 initially high (unlit, since active-low) # Low data byte 0x08 configures TMS on ACBUS3 initially high (asserted); TCK, TDI low # High direction byte 0x40 configures red LED on ACBUS6 as high (output) # Low direction byte 0x0b configures TDO on ACBUS2 as low (input) -ftdi_layout_init 0x4008 0x400b +ftdi layout_init 0x4008 0x400b # ---A*BUS-------CCCCCCCC|DDDDDDDD # --------\______76543210|76543210 @@ -35,12 +35,12 @@ ftdi_layout_init 0x4008 0x400b #GPIOL2 0x0040 = 00000000|01000000 = ADBUS6 #GPIOL3 0x0080 = 00000000|10000000 = ADBUS7 # -ndata treats the LED as active-low for expected behavior (toggle when transferring) -ftdi_layout_signal LED -ndata 0x4000 +ftdi layout_signal LED -ndata 0x4000 # Available for aliasing as desired -ftdi_layout_signal GPIOL0 -data 0x0010 -oe 0x0010 -ftdi_layout_signal GPIOL1 -data 0x0020 -oe 0x0020 -ftdi_layout_signal GPIOL2 -data 0x0040 -oe 0x0040 -ftdi_layout_signal GPIOL3 -data 0x0080 -oe 0x0080 +ftdi layout_signal GPIOL0 -data 0x0010 -oe 0x0010 +ftdi layout_signal GPIOL1 -data 0x0020 -oe 0x0020 +ftdi layout_signal GPIOL2 -data 0x0040 -oe 0x0040 +ftdi layout_signal GPIOL3 -data 0x0080 -oe 0x0080 # C232HM FT232H JTAG/Other # Num Color Name Func diff --git a/tcl/interface/ftdi/calao-usb-a9260-c01.cfg b/tcl/interface/ftdi/calao-usb-a9260-c01.cfg index a23ddbf..41e5973 100644 --- a/tcl/interface/ftdi/calao-usb-a9260-c01.cfg +++ b/tcl/interface/ftdi/calao-usb-a9260-c01.cfg @@ -11,12 +11,12 @@ echo "experience with this file to openocd-devel mailing list, so it could be ma echo "as working or fixed." adapter driver ftdi -ftdi_device_desc "USB-A9260" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "USB-A9260" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0c08 0x0f1b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_init 0x0c08 0x0f1b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 script interface/calao-usb-a9260.cfg script target/at91sam9260minimal.cfg diff --git a/tcl/interface/ftdi/calao-usb-a9260-c02.cfg b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg index 67427c5..001aef5 100644 --- a/tcl/interface/ftdi/calao-usb-a9260-c02.cfg +++ b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg @@ -11,12 +11,12 @@ echo "experience with this file to openocd-devel mailing list, so it could be ma echo "as working or fixed." adapter driver ftdi -ftdi_device_desc "USB-A9260" -ftdi_vid_pid 0x0403 0x6001 +ftdi device_desc "USB-A9260" +ftdi vid_pid 0x0403 0x6001 -ftdi_layout_init 0x0c08 0x0f1b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_init 0x0c08 0x0f1b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 script interface/calao-usb-a9260.cfg script target/at91sam9260minimal.cfg diff --git a/tcl/interface/ftdi/cortino.cfg b/tcl/interface/ftdi/cortino.cfg index 2bc516c..c0eae31 100644 --- a/tcl/interface/ftdi/cortino.cfg +++ b/tcl/interface/ftdi/cortino.cfg @@ -5,9 +5,9 @@ # adapter driver ftdi -ftdi_device_desc "Cortino" -ftdi_vid_pid 0x0640 0x0032 +ftdi device_desc "Cortino" +ftdi vid_pid 0x0640 0x0032 -ftdi_layout_init 0x0108 0x010b -ftdi_layout_signal nTRST -data 0x0100 -ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200 +ftdi layout_init 0x0108 0x010b +ftdi layout_signal nTRST -data 0x0100 +ftdi layout_signal nSRST -data 0x0200 -oe 0x0200 diff --git a/tcl/interface/ftdi/digilent-hs1.cfg b/tcl/interface/ftdi/digilent-hs1.cfg index dfba339..55391b9 100644 --- a/tcl/interface/ftdi/digilent-hs1.cfg +++ b/tcl/interface/ftdi/digilent-hs1.cfg @@ -2,10 +2,10 @@ # (the later being the OEM on-board version) adapter driver ftdi -ftdi_device_desc "Digilent Adept USB Device" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Digilent Adept USB Device" +ftdi vid_pid 0x0403 0x6010 # channel 1 does not have any functionality -ftdi_channel 0 +ftdi channel 0 # just TCK TDI TDO TMS, no reset -ftdi_layout_init 0x0088 0x008b +ftdi layout_init 0x0088 0x008b reset_config none diff --git a/tcl/interface/ftdi/digilent-hs2.cfg b/tcl/interface/ftdi/digilent-hs2.cfg index ae6ba01..269eca0 100644 --- a/tcl/interface/ftdi/digilent-hs2.cfg +++ b/tcl/interface/ftdi/digilent-hs2.cfg @@ -1,10 +1,10 @@ # this supports JTAG-HS2 (and apparently Nexys4 as well) adapter driver ftdi -ftdi_device_desc "Digilent Adept USB Device" -ftdi_vid_pid 0x0403 0x6014 +ftdi device_desc "Digilent Adept USB Device" +ftdi vid_pid 0x0403 0x6014 -ftdi_channel 0 -ftdi_layout_init 0x00e8 0x60eb +ftdi channel 0 +ftdi layout_init 0x00e8 0x60eb reset_config none diff --git a/tcl/interface/ftdi/digilent_jtag_hs3.cfg b/tcl/interface/ftdi/digilent_jtag_hs3.cfg index 7160bed..ca2807f 100644 --- a/tcl/interface/ftdi/digilent_jtag_hs3.cfg +++ b/tcl/interface/ftdi/digilent_jtag_hs3.cfg @@ -3,11 +3,11 @@ # adapter driver ftdi -ftdi_vid_pid 0x0403 0x6014 -ftdi_device_desc "Digilent USB Device" +ftdi vid_pid 0x0403 0x6014 +ftdi device_desc "Digilent USB Device" # From Digilent support: # The SRST pin is [...] 0x20 and 0x10 is the /OE (active low output enable) -ftdi_layout_init 0x2088 0x308b -ftdi_layout_signal nSRST -data 0x2000 -noe 0x1000 +ftdi layout_init 0x2088 0x308b +ftdi layout_signal nSRST -data 0x2000 -noe 0x1000 diff --git a/tcl/interface/ftdi/digilent_jtag_smt2.cfg b/tcl/interface/ftdi/digilent_jtag_smt2.cfg index 493ed6a..d1b11b8 100644 --- a/tcl/interface/ftdi/digilent_jtag_smt2.cfg +++ b/tcl/interface/ftdi/digilent_jtag_smt2.cfg @@ -8,10 +8,10 @@ # adapter driver ftdi -ftdi_vid_pid 0x0403 0x6014 +ftdi vid_pid 0x0403 0x6014 -ftdi_layout_init 0x2088 0x3f8b -ftdi_layout_signal nSRST -data 0x2000 -ftdi_layout_signal GPIO2 -data 0x2000 -ftdi_layout_signal GPIO1 -data 0x0200 -ftdi_layout_signal GPIO0 -data 0x0100 +ftdi layout_init 0x2088 0x3f8b +ftdi layout_signal nSRST -data 0x2000 +ftdi layout_signal GPIO2 -data 0x2000 +ftdi layout_signal GPIO1 -data 0x0200 +ftdi layout_signal GPIO0 -data 0x0100 diff --git a/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg b/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg index bc783a4..a143cd7 100644 --- a/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg +++ b/tcl/interface/ftdi/digilent_jtag_smt2_nc.cfg @@ -8,11 +8,11 @@ # https://www.xilinx.com/products/boards-and-kits/kcu105.html#documentation # # Note that the digilent_jtag_smt2 layout does not work and hangs while -# the ftdi_device_desc from digilent_hs2 is wrong. +# the ftdi device_desc from digilent_hs2 is wrong. adapter driver ftdi -ftdi_device_desc "Digilent USB Device" -ftdi_vid_pid 0x0403 0x6014 -ftdi_channel 0 -ftdi_layout_init 0x00e8 0x60eb +ftdi device_desc "Digilent USB Device" +ftdi vid_pid 0x0403 0x6014 +ftdi channel 0 +ftdi layout_init 0x00e8 0x60eb reset_config none diff --git a/tcl/interface/ftdi/dlp-usb1232h.cfg b/tcl/interface/ftdi/dlp-usb1232h.cfg index 9ddc2c8..e9651dd 100644 --- a/tcl/interface/ftdi/dlp-usb1232h.cfg +++ b/tcl/interface/ftdi/dlp-usb1232h.cfg @@ -13,9 +13,9 @@ echo "in ft2232.c. Please report your experience with this file to openocd-devel echo "mailing list, so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0008 0x000b -ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 -ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 +ftdi layout_init 0x0008 0x000b +ftdi layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi layout_signal nSRST -data 0x0040 -oe 0x0040 diff --git a/tcl/interface/ftdi/dp_busblaster.cfg b/tcl/interface/ftdi/dp_busblaster.cfg index 86ab4d8..420f788 100644 --- a/tcl/interface/ftdi/dp_busblaster.cfg +++ b/tcl/interface/ftdi/dp_busblaster.cfg @@ -12,9 +12,9 @@ echo "Info : If you need SWD support, flash KT-Link buffer from https://github.c and use dp_busblaster_kt-link.cfg instead" adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0c08 0x0f1b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_init 0x0c08 0x0f1b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 diff --git a/tcl/interface/ftdi/dp_busblaster_kt-link.cfg b/tcl/interface/ftdi/dp_busblaster_kt-link.cfg index d49a4c9..4924d26 100644 --- a/tcl/interface/ftdi/dp_busblaster_kt-link.cfg +++ b/tcl/interface/ftdi/dp_busblaster_kt-link.cfg @@ -10,12 +10,12 @@ # adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x8c28 0xff3b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 -ftdi_layout_signal LED -ndata 0x8000 -ftdi_layout_signal SWD_EN -ndata 0x0020 -oe 0x2000 -ftdi_layout_signal SWDIO_OE -ndata 0x1000 +ftdi layout_init 0x8c28 0xff3b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_signal LED -ndata 0x8000 +ftdi layout_signal SWD_EN -ndata 0x0020 -oe 0x2000 +ftdi layout_signal SWDIO_OE -ndata 0x1000 diff --git a/tcl/interface/ftdi/flossjtag-noeeprom.cfg b/tcl/interface/ftdi/flossjtag-noeeprom.cfg index 42ed18e..7083e63 100644 --- a/tcl/interface/ftdi/flossjtag-noeeprom.cfg +++ b/tcl/interface/ftdi/flossjtag-noeeprom.cfg @@ -18,9 +18,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0008 0x000b -ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 -ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 +ftdi layout_init 0x0008 0x000b +ftdi layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi layout_signal nSRST -data 0x0040 -oe 0x0040 diff --git a/tcl/interface/ftdi/flossjtag.cfg b/tcl/interface/ftdi/flossjtag.cfg index c4ad81d..2e3cfca 100644 --- a/tcl/interface/ftdi/flossjtag.cfg +++ b/tcl/interface/ftdi/flossjtag.cfg @@ -18,12 +18,12 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_vid_pid 0x0403 0x6010 -ftdi_device_desc "FLOSS-JTAG" -#ftdi_serial "FJ000001" +ftdi vid_pid 0x0403 0x6010 +ftdi device_desc "FLOSS-JTAG" +#ftdi serial "FJ000001" -ftdi_layout_init 0x0008 0x180b -ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 -ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 -ftdi_layout_signal LED -data 0x0800 -ftdi_layout_signal LED2 -data 0x1000 +ftdi layout_init 0x0008 0x180b +ftdi layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi layout_signal nSRST -data 0x0040 -oe 0x0040 +ftdi layout_signal LED -data 0x0800 +ftdi layout_signal LED2 -data 0x1000 diff --git a/tcl/interface/ftdi/flyswatter.cfg b/tcl/interface/ftdi/flyswatter.cfg index 5e9d481..5afd1bd 100644 --- a/tcl/interface/ftdi/flyswatter.cfg +++ b/tcl/interface/ftdi/flyswatter.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "Flyswatter" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Flyswatter" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0818 0x0cfb -ftdi_layout_signal nTRST -data 0x0010 -ftdi_layout_signal nSRST -oe 0x0020 -ftdi_layout_signal LED -data 0x0c00 +ftdi layout_init 0x0818 0x0cfb +ftdi layout_signal nTRST -data 0x0010 +ftdi layout_signal nSRST -oe 0x0020 +ftdi layout_signal LED -data 0x0c00 diff --git a/tcl/interface/ftdi/flyswatter2.cfg b/tcl/interface/ftdi/flyswatter2.cfg index 45dd0ba..e3eda6b 100644 --- a/tcl/interface/ftdi/flyswatter2.cfg +++ b/tcl/interface/ftdi/flyswatter2.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "Flyswatter2" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Flyswatter2" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0538 0x057b -ftdi_layout_signal LED -ndata 0x0400 -ftdi_layout_signal nTRST -data 0x0010 -ftdi_layout_signal nSRST -data 0x0020 -noe 0x0100 +ftdi layout_init 0x0538 0x057b +ftdi layout_signal LED -ndata 0x0400 +ftdi layout_signal nTRST -data 0x0010 +ftdi layout_signal nSRST -data 0x0020 -noe 0x0100 diff --git a/tcl/interface/ftdi/ft232h-module-swd.cfg b/tcl/interface/ftdi/ft232h-module-swd.cfg index 98a8c84..7fa4283 100644 --- a/tcl/interface/ftdi/ft232h-module-swd.cfg +++ b/tcl/interface/ftdi/ft232h-module-swd.cfg @@ -8,27 +8,27 @@ adapter driver ftdi -ftdi_vid_pid 0x0403 0x6014 +ftdi vid_pid 0x0403 0x6014 # data MSB..LSB direction (1:out) MSB..LSB # 0000'0000'0011'0000 0000'0000'0011'1011 -ftdi_layout_init 0x0030 0x003b +ftdi layout_init 0x0030 0x003b # 0xfff8 0xfffb # Those signal are only required on some platforms or may required to be # enabled explicitly (e.g. nrf5x chips). -ftdi_layout_signal nSRST -data 0x0010 -oe 0x0010 -ftdi_layout_signal nTRST -data 0x0020 -oe 0x0020 +ftdi layout_signal nSRST -data 0x0010 -oe 0x0010 +ftdi layout_signal nTRST -data 0x0020 -oe 0x0020 # swd enable -ftdi_layout_signal SWD_EN -data 0 +ftdi layout_signal SWD_EN -data 0 # tri-state (configure as input) TDO/TIO when reading -ftdi_layout_signal SWDIO_OE -data 0 +ftdi layout_signal SWDIO_OE -data 0 transport select swd # re-configure TDO as tri-state -#ftdi_layout_signal TDO -data 0x0002 -oe 0x0002 -#ftdi_layout_signal TDI -data 0x0004 +#ftdi layout_signal TDO -data 0x0002 -oe 0x0002 +#ftdi layout_signal TDI -data 0x0004 # Adafruit FT232H JTAG SWD # Name Pin Name Func Func diff --git a/tcl/interface/ftdi/gw16042.cfg b/tcl/interface/ftdi/gw16042.cfg index 1288f77..ef31829 100644 --- a/tcl/interface/ftdi/gw16042.cfg +++ b/tcl/interface/ftdi/gw16042.cfg @@ -18,9 +18,9 @@ # adapter driver ftdi -ftdi_device_desc "USB-JTAG" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "USB-JTAG" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0058 0x007b -ftdi_layout_signal nTRST -data 0x0010 -ftdi_layout_signal nSRST -oe 0x0020 +ftdi layout_init 0x0058 0x007b +ftdi layout_signal nTRST -data 0x0010 +ftdi layout_signal nSRST -oe 0x0020 diff --git a/tcl/interface/ftdi/hie-jtag.cfg b/tcl/interface/ftdi/hie-jtag.cfg index 39af87d..6694df0 100644 --- a/tcl/interface/ftdi/hie-jtag.cfg +++ b/tcl/interface/ftdi/hie-jtag.cfg @@ -6,15 +6,15 @@ # adapter driver ftdi -ftdi_channel 0 -ftdi_vid_pid 0x0403 0x6014 -ftdi_device_desc "HIE JTAG Debugger" +ftdi channel 0 +ftdi vid_pid 0x0403 0x6014 +ftdi device_desc "HIE JTAG Debugger" -ftdi_layout_init 0x0c08 0x4f1b +ftdi layout_init 0x0c08 0x4f1b # define both Reset signals -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 # Toggle USB LED -ftdi_layout_signal LED -ndata 0x4000 +ftdi layout_signal LED -ndata 0x4000 diff --git a/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg index 3802f6d..d55f636 100644 --- a/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg +++ b/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg @@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "NXHX 10-ETM" -ftdi_vid_pid 0x0640 0x0028 +ftdi device_desc "NXHX 10-ETM" +ftdi vid_pid 0x0640 0x0028 -ftdi_layout_init 0x0308 0x030b -ftdi_layout_signal nTRST -data 0x0100 -ftdi_layout_signal nSRST -data 0x0200 +ftdi layout_init 0x0308 0x030b +ftdi layout_signal nTRST -data 0x0100 +ftdi layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg index f2e64b4..8c79815 100644 --- a/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg +++ b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg @@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "NXHX 500-ETM" -ftdi_vid_pid 0x0640 0x0028 +ftdi device_desc "NXHX 500-ETM" +ftdi vid_pid 0x0640 0x0028 -ftdi_layout_init 0x0308 0x030b -ftdi_layout_signal nTRST -data 0x0100 -ftdi_layout_signal nSRST -data 0x0200 +ftdi layout_init 0x0308 0x030b +ftdi layout_signal nTRST -data 0x0100 +ftdi layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hilscher_nxhx500_re.cfg b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg index 38f3c69..9aa2cd5 100644 --- a/tcl/interface/ftdi/hilscher_nxhx500_re.cfg +++ b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg @@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "NXHX 500-RE" -ftdi_vid_pid 0x0640 0x0028 +ftdi device_desc "NXHX 500-RE" +ftdi vid_pid 0x0640 0x0028 -ftdi_layout_init 0x0308 0x030b -ftdi_layout_signal nTRST -data 0x0100 -ftdi_layout_signal nSRST -data 0x0200 +ftdi layout_init 0x0308 0x030b +ftdi layout_signal nTRST -data 0x0100 +ftdi layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg index bff081f..a64d0e8 100644 --- a/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg +++ b/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg @@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "NXHX 50-ETM" -ftdi_vid_pid 0x0640 0x0028 +ftdi device_desc "NXHX 50-ETM" +ftdi vid_pid 0x0640 0x0028 -ftdi_layout_init 0x0308 0x030b -ftdi_layout_signal nTRST -data 0x0100 -ftdi_layout_signal nSRST -data 0x0200 +ftdi layout_init 0x0308 0x030b +ftdi layout_signal nTRST -data 0x0100 +ftdi layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hilscher_nxhx50_re.cfg b/tcl/interface/ftdi/hilscher_nxhx50_re.cfg index f9fbd01..2778836 100644 --- a/tcl/interface/ftdi/hilscher_nxhx50_re.cfg +++ b/tcl/interface/ftdi/hilscher_nxhx50_re.cfg @@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "NXHX50-RE" -ftdi_vid_pid 0x0640 0x0028 +ftdi device_desc "NXHX50-RE" +ftdi vid_pid 0x0640 0x0028 -ftdi_layout_init 0x0308 0x030b -ftdi_layout_signal nTRST -data 0x0100 -ftdi_layout_signal nSRST -data 0x0200 +ftdi layout_init 0x0308 0x030b +ftdi layout_signal nTRST -data 0x0100 +ftdi layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hitex_lpc1768stick.cfg b/tcl/interface/ftdi/hitex_lpc1768stick.cfg index 9fe80f1..87affe8 100644 --- a/tcl/interface/ftdi/hitex_lpc1768stick.cfg +++ b/tcl/interface/ftdi/hitex_lpc1768stick.cfg @@ -6,9 +6,9 @@ adapter driver ftdi -ftdi_device_desc "LPC1768-Stick" -ftdi_vid_pid 0x0640 0x0026 +ftdi device_desc "LPC1768-Stick" +ftdi vid_pid 0x0640 0x0026 -ftdi_layout_init 0x0388 0x038b -ftdi_layout_signal nTRST -data 0x0100 -ftdi_layout_signal nSRST -data 0x0080 -noe 0x200 +ftdi layout_init 0x0388 0x038b +ftdi layout_signal nTRST -data 0x0100 +ftdi layout_signal nSRST -data 0x0080 -noe 0x200 diff --git a/tcl/interface/ftdi/hitex_str9-comstick.cfg b/tcl/interface/ftdi/hitex_str9-comstick.cfg index 2b3dc36..6490d65 100644 --- a/tcl/interface/ftdi/hitex_str9-comstick.cfg +++ b/tcl/interface/ftdi/hitex_str9-comstick.cfg @@ -5,9 +5,9 @@ # adapter driver ftdi -ftdi_device_desc "STR9-comStick" -ftdi_vid_pid 0x0640 0x002c +ftdi device_desc "STR9-comStick" +ftdi vid_pid 0x0640 0x002c -ftdi_layout_init 0x0108 0x010b -ftdi_layout_signal nTRST -data 0x0100 -ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200 +ftdi layout_init 0x0108 0x010b +ftdi layout_signal nTRST -data 0x0100 +ftdi layout_signal nSRST -data 0x0200 -oe 0x0200 diff --git a/tcl/interface/ftdi/icebear.cfg b/tcl/interface/ftdi/icebear.cfg index 04c2731..76b2102 100644 --- a/tcl/interface/ftdi/icebear.cfg +++ b/tcl/interface/ftdi/icebear.cfg @@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "ICEbear JTAG adapter" -ftdi_vid_pid 0x0403 0xc140 +ftdi device_desc "ICEbear JTAG adapter" +ftdi vid_pid 0x0403 0xc140 -ftdi_layout_init 0x0028 0x002b -ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 -ftdi_layout_signal nSRST -data 0x0020 +ftdi layout_init 0x0028 0x002b +ftdi layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi layout_signal nSRST -data 0x0020 diff --git a/tcl/interface/ftdi/imx8mp-evk.cfg b/tcl/interface/ftdi/imx8mp-evk.cfg index 4e04e8c..64f3f3d 100644 --- a/tcl/interface/ftdi/imx8mp-evk.cfg +++ b/tcl/interface/ftdi/imx8mp-evk.cfg @@ -11,18 +11,18 @@ # adapter driver ftdi -ftdi_vid_pid 0x0403 0x6011 -ftdi_channel 0 +ftdi vid_pid 0x0403 0x6011 +ftdi channel 0 -ftdi_layout_init 0x00f8 0x000b +ftdi layout_init 0x00f8 0x000b -ftdi_layout_signal RESET_B -data 0x0010 -oe 0x0010 +ftdi layout_signal RESET_B -data 0x0010 -oe 0x0010 # Called SYS_nRST in schematics -ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020 -ftdi_layout_signal IO_nRST -data 0x0040 -oe 0x0040 -ftdi_layout_signal ONOFF_B -data 0x0080 -oe 0x0080 +ftdi layout_signal nSRST -data 0x0020 -oe 0x0020 +ftdi layout_signal IO_nRST -data 0x0040 -oe 0x0040 +ftdi layout_signal ONOFF_B -data 0x0080 -oe 0x0080 -ftdi_layout_signal GPIO1 -data 0x0100 -oe 0x0100 -ftdi_layout_signal GPIO2 -data 0x0200 -oe 0x0200 -ftdi_layout_signal GPIO3 -data 0x0400 -oe 0x0400 -ftdi_layout_signal GPIO4 -data 0x0800 -oe 0x0800 +ftdi layout_signal GPIO1 -data 0x0100 -oe 0x0100 +ftdi layout_signal GPIO2 -data 0x0200 -oe 0x0200 +ftdi layout_signal GPIO3 -data 0x0400 -oe 0x0400 +ftdi layout_signal GPIO4 -data 0x0800 -oe 0x0800 diff --git a/tcl/interface/ftdi/incircuit-icprog.cfg b/tcl/interface/ftdi/incircuit-icprog.cfg index e0bd5ef..a200954 100644 --- a/tcl/interface/ftdi/incircuit-icprog.cfg +++ b/tcl/interface/ftdi/incircuit-icprog.cfg @@ -7,8 +7,8 @@ # adapter driver ftdi -ftdi_vid_pid 0x0403 0x6010 +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0508 0x0f1b -ftdi_layout_signal nSRST -noe 0x0400 -data 0x0800 -ftdi_layout_signal nTRST -noe 0x0100 -data 0x0200 +ftdi layout_init 0x0508 0x0f1b +ftdi layout_signal nSRST -noe 0x0400 -data 0x0800 +ftdi layout_signal nTRST -noe 0x0100 -data 0x0200 diff --git a/tcl/interface/ftdi/iotlab-usb.cfg b/tcl/interface/ftdi/iotlab-usb.cfg index caa0596..92ffa84 100644 --- a/tcl/interface/ftdi/iotlab-usb.cfg +++ b/tcl/interface/ftdi/iotlab-usb.cfg @@ -4,8 +4,8 @@ # adapter driver ftdi -ftdi_vid_pid 0x0403 0x6010 +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0008 0x000b -ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 -ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 +ftdi layout_init 0x0008 0x000b +ftdi layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi layout_signal nSRST -data 0x0040 -oe 0x0040 diff --git a/tcl/interface/ftdi/isodebug.cfg b/tcl/interface/ftdi/isodebug.cfg index ead2864..0189989 100644 --- a/tcl/interface/ftdi/isodebug.cfg +++ b/tcl/interface/ftdi/isodebug.cfg @@ -2,26 +2,26 @@ # 5 kV isolated JTAG/SWD + UART adapter by Unjo AB adapter driver ftdi -ftdi_vid_pid 0x22b7 0x150d +ftdi vid_pid 0x22b7 0x150d -ftdi_layout_init 0x0ff8 0xfffb +ftdi layout_init 0x0ff8 0xfffb -ftdi_layout_signal LED -ndata 0x0100 -ftdi_layout_signal nTRST -data 0x0200 -ftdi_layout_signal nSRST -noe 0x0400 -ftdi_layout_signal SWDIO_OE -data 0x0008 +ftdi layout_signal LED -ndata 0x0100 +ftdi layout_signal nTRST -data 0x0200 +ftdi layout_signal nSRST -noe 0x0400 +ftdi layout_signal SWDIO_OE -data 0x0008 # Mode signals, either of these needs to be high to drive the JTAG/SWD pins. # The power-on state is low for both signals but the init setting above sets # JTAG_EN high. -ftdi_layout_signal SWD_EN -data 0x1000 -ftdi_layout_signal JTAG_EN -data 0x0800 +ftdi layout_signal SWD_EN -data 0x1000 +ftdi layout_signal JTAG_EN -data 0x0800 # In SWD mode, the JTAG_EN signal doubles as SWO_EN_N which switches the # second FTDI channel UART RxD to the SWO pin instead of the separate RxD # pin. Note that the default init state has this pin high so when OpenOCD # starts in SWD mode, SWO is by default disabled. To enable SWO tracing, -# issue the command 'ftdi_set_signal SWO_EN 1' where tracing is configured. +# issue the command 'ftdi set_signal SWO_EN 1' where tracing is configured. # To switch back to using the separate UART, SWO_EN needs to be disabled # before exiting OpenOCD, or the adapter replugged. -ftdi_layout_signal SWO_EN -nalias JTAG_EN +ftdi layout_signal SWO_EN -nalias JTAG_EN diff --git a/tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg b/tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg index 82eeaa7..3eefecf 100644 --- a/tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg +++ b/tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg @@ -5,12 +5,12 @@ # adapter driver ftdi -ftdi_device_desc "JTAG-lock-pick Tiny 2" -ftdi_vid_pid 0x0403 0x8220 +ftdi device_desc "JTAG-lock-pick Tiny 2" +ftdi vid_pid 0x0403 0x8220 -ftdi_layout_init 0x8c28 0xff3b -ftdi_layout_signal SWD_EN -ndata 0x0020 -oe 0x2000 -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 -ftdi_layout_signal SWDIO_OE -ndata 0x1000 -ftdi_layout_signal LED -ndata 0x8000 +ftdi layout_init 0x8c28 0xff3b +ftdi layout_signal SWD_EN -ndata 0x0020 -oe 0x2000 +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_signal SWDIO_OE -ndata 0x1000 +ftdi layout_signal LED -ndata 0x8000 diff --git a/tcl/interface/ftdi/jtagkey.cfg b/tcl/interface/ftdi/jtagkey.cfg index 06463ab..511244b 100644 --- a/tcl/interface/ftdi/jtagkey.cfg +++ b/tcl/interface/ftdi/jtagkey.cfg @@ -5,9 +5,9 @@ # adapter driver ftdi -ftdi_device_desc "Amontec JTAGkey" -ftdi_vid_pid 0x0403 0xcff8 +ftdi device_desc "Amontec JTAGkey" +ftdi vid_pid 0x0403 0xcff8 -ftdi_layout_init 0x0c08 0x0f1b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_init 0x0c08 0x0f1b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 diff --git a/tcl/interface/ftdi/jtagkey2.cfg b/tcl/interface/ftdi/jtagkey2.cfg index ba151d3..aa33a75 100644 --- a/tcl/interface/ftdi/jtagkey2.cfg +++ b/tcl/interface/ftdi/jtagkey2.cfg @@ -5,9 +5,9 @@ # adapter driver ftdi -ftdi_device_desc "Amontec JTAGkey-2" -ftdi_vid_pid 0x0403 0xcff8 +ftdi device_desc "Amontec JTAGkey-2" +ftdi vid_pid 0x0403 0xcff8 -ftdi_layout_init 0x0c08 0x0f1b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_init 0x0c08 0x0f1b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 diff --git a/tcl/interface/ftdi/jtagkey2p.cfg b/tcl/interface/ftdi/jtagkey2p.cfg index acb5047..dbfca66 100644 --- a/tcl/interface/ftdi/jtagkey2p.cfg +++ b/tcl/interface/ftdi/jtagkey2p.cfg @@ -5,9 +5,9 @@ # adapter driver ftdi -ftdi_device_desc "Amontec JTAGkey-2P" -ftdi_vid_pid 0x0403 0xcff8 +ftdi device_desc "Amontec JTAGkey-2P" +ftdi vid_pid 0x0403 0xcff8 -ftdi_layout_init 0x0c08 0x0f1b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_init 0x0c08 0x0f1b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 diff --git a/tcl/interface/ftdi/kt-link.cfg b/tcl/interface/ftdi/kt-link.cfg index 5fc5db9..112ecf1 100644 --- a/tcl/interface/ftdi/kt-link.cfg +++ b/tcl/interface/ftdi/kt-link.cfg @@ -5,12 +5,12 @@ # adapter driver ftdi -ftdi_device_desc "KT-LINK" -ftdi_vid_pid 0x0403 0xbbe2 +ftdi device_desc "KT-LINK" +ftdi vid_pid 0x0403 0xbbe2 -ftdi_layout_init 0x8c28 0xff3b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 -ftdi_layout_signal LED -data 0x8000 -ftdi_layout_signal SWD_EN -ndata 0x0020 -oe 0x2000 -ftdi_layout_signal SWDIO_OE -ndata 0x1000 +ftdi layout_init 0x8c28 0xff3b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_signal LED -data 0x8000 +ftdi layout_signal SWD_EN -ndata 0x0020 -oe 0x2000 +ftdi layout_signal SWDIO_OE -ndata 0x1000 diff --git a/tcl/interface/ftdi/lisa-l.cfg b/tcl/interface/ftdi/lisa-l.cfg index 4e52f7b..3da64a0 100644 --- a/tcl/interface/ftdi/lisa-l.cfg +++ b/tcl/interface/ftdi/lisa-l.cfg @@ -10,11 +10,11 @@ echo "in ft2232.c. Please report your experience with this file to openocd-devel echo "mailing list, so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "Lisa/L" -ftdi_vid_pid 0x0403 0x6010 -ftdi_channel 1 +ftdi device_desc "Lisa/L" +ftdi vid_pid 0x0403 0x6010 +ftdi channel 1 -ftdi_layout_init 0x0008 0x180b -ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 -ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 -ftdi_layout_signal LED -data 0x1800 +ftdi layout_init 0x0008 0x180b +ftdi layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi layout_signal nSRST -data 0x0040 -oe 0x0040 +ftdi layout_signal LED -data 0x1800 diff --git a/tcl/interface/ftdi/luminary-icdi.cfg b/tcl/interface/ftdi/luminary-icdi.cfg index 8bc783e..08676a3 100644 --- a/tcl/interface/ftdi/luminary-icdi.cfg +++ b/tcl/interface/ftdi/luminary-icdi.cfg @@ -16,10 +16,10 @@ # adapter driver ftdi -ftdi_device_desc "Luminary Micro ICDI Board" -ftdi_vid_pid 0x0403 0xbcda +ftdi device_desc "Luminary Micro ICDI Board" +ftdi vid_pid 0x0403 0xbcda -ftdi_layout_init 0x00a8 0x00eb -ftdi_layout_signal nSRST -noe 0x0020 -ftdi_layout_signal SWD_EN -ndata 0x0080 -ftdi_layout_signal SWDIO_OE -data 0x0008 +ftdi layout_init 0x00a8 0x00eb +ftdi layout_signal nSRST -noe 0x0020 +ftdi layout_signal SWD_EN -ndata 0x0080 +ftdi layout_signal SWDIO_OE -data 0x0008 diff --git a/tcl/interface/ftdi/luminary-lm3s811.cfg b/tcl/interface/ftdi/luminary-lm3s811.cfg index aac915e..90f454e 100644 --- a/tcl/interface/ftdi/luminary-lm3s811.cfg +++ b/tcl/interface/ftdi/luminary-lm3s811.cfg @@ -12,10 +12,10 @@ # adapter driver ftdi -ftdi_device_desc "LM3S811 Evaluation Board" -ftdi_vid_pid 0x0403 0xbcd9 +ftdi device_desc "LM3S811 Evaluation Board" +ftdi vid_pid 0x0403 0xbcd9 -ftdi_layout_init 0x0088 0x008b -ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020 -ftdi_layout_signal SWD_EN -ndata 0x0080 -ftdi_layout_signal SWDIO_OE -data 0x0008 +ftdi layout_init 0x0088 0x008b +ftdi layout_signal nSRST -data 0x0020 -oe 0x0020 +ftdi layout_signal SWD_EN -ndata 0x0080 +ftdi layout_signal SWDIO_OE -data 0x0008 diff --git a/tcl/interface/ftdi/luminary.cfg b/tcl/interface/ftdi/luminary.cfg index 5e34f8c..3258b21 100644 --- a/tcl/interface/ftdi/luminary.cfg +++ b/tcl/interface/ftdi/luminary.cfg @@ -25,10 +25,10 @@ # adapter driver ftdi -ftdi_device_desc "Stellaris Evaluation Board" -ftdi_vid_pid 0x0403 0xbcd9 +ftdi device_desc "Stellaris Evaluation Board" +ftdi vid_pid 0x0403 0xbcd9 -ftdi_layout_init 0x00a8 0x00eb -ftdi_layout_signal nSRST -noe 0x0020 -ftdi_layout_signal SWD_EN -ndata 0x0080 -ftdi_layout_signal SWDIO_OE -data 0x0008 +ftdi layout_init 0x00a8 0x00eb +ftdi layout_signal nSRST -noe 0x0020 +ftdi layout_signal SWD_EN -ndata 0x0080 +ftdi layout_signal SWDIO_OE -data 0x0008 diff --git a/tcl/interface/ftdi/m53evk.cfg b/tcl/interface/ftdi/m53evk.cfg index 6597f2d..2b7c434 100644 --- a/tcl/interface/ftdi/m53evk.cfg +++ b/tcl/interface/ftdi/m53evk.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 -ftdi_channel 0 -ftdi_layout_init 0x0008 0x000b -ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 -ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020 +ftdi channel 0 +ftdi layout_init 0x0008 0x000b +ftdi layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi layout_signal nSRST -data 0x0020 -oe 0x0020 diff --git a/tcl/interface/ftdi/mbftdi.cfg b/tcl/interface/ftdi/mbftdi.cfg index c0ff865..a34390b 100644 --- a/tcl/interface/ftdi/mbftdi.cfg +++ b/tcl/interface/ftdi/mbftdi.cfg @@ -10,7 +10,7 @@ # adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0008 0x000b +ftdi layout_init 0x0008 0x000b diff --git a/tcl/interface/ftdi/minimodule-swd.cfg b/tcl/interface/ftdi/minimodule-swd.cfg index 4bc331e..15b007a 100644 --- a/tcl/interface/ftdi/minimodule-swd.cfg +++ b/tcl/interface/ftdi/minimodule-swd.cfg @@ -38,17 +38,17 @@ adapter driver ftdi #Select your module type and channel -#ftdi_device_desc "FT2232H MiniModule" -ftdi_vid_pid 0x0403 0x6010 -#ftdi_channel 1 +#ftdi device_desc "FT2232H MiniModule" +ftdi vid_pid 0x0403 0x6010 +#ftdi channel 1 -#ftdi_device_desc "FT4232H MiniModule" -#ftdi_vid_pid 0x0403 0x6011 -#ftdi_channel 1 +#ftdi device_desc "FT4232H MiniModule" +#ftdi vid_pid 0x0403 0x6011 +#ftdi channel 1 -ftdi_layout_init 0x0000 0x000b -ftdi_layout_signal nSRST -data 0x0010 -oe 0x0010 -ftdi_layout_signal SWD_EN -data 0 -ftdi_layout_signal SWDIO_OE -data 0 +ftdi layout_init 0x0000 0x000b +ftdi layout_signal nSRST -data 0x0010 -oe 0x0010 +ftdi layout_signal SWD_EN -data 0 +ftdi layout_signal SWDIO_OE -data 0 transport select swd diff --git a/tcl/interface/ftdi/minimodule.cfg b/tcl/interface/ftdi/minimodule.cfg index 5dcce1f..6b2d60c 100644 --- a/tcl/interface/ftdi/minimodule.cfg +++ b/tcl/interface/ftdi/minimodule.cfg @@ -5,12 +5,12 @@ # adapter driver ftdi -ftdi_device_desc "FT2232H MiniModule" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "FT2232H MiniModule" +ftdi vid_pid 0x0403 0x6010 # Every pin set as high impedance except TCK, TDI, TDO and TMS -ftdi_layout_init 0x0008 0x000b +ftdi layout_init 0x0008 0x000b # nSRST defined on pin CN2-13 of the MiniModule (pin ADBUS5 [AD5] on the FT2232H chip) # This choice is arbitrary. Use other GPIO pin if desired. -ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020 +ftdi layout_signal nSRST -data 0x0020 -oe 0x0020 diff --git a/tcl/interface/ftdi/minispartan6.cfg b/tcl/interface/ftdi/minispartan6.cfg index 97a6abe..faf820d 100644 --- a/tcl/interface/ftdi/minispartan6.cfg +++ b/tcl/interface/ftdi/minispartan6.cfg @@ -3,12 +3,12 @@ adapter driver ftdi # The miniSpartan6+ sadly doesn't have a custom device description, so we just # have to hope you got it right. -#ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +#ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 # interface 1 is the uart -ftdi_channel 0 +ftdi channel 0 # just TCK TDI TDO TMS, no reset -ftdi_layout_init 0x0008 0x000b +ftdi layout_init 0x0008 0x000b reset_config none # this generally works fast: the fpga can handle 30MHz, the spi flash can handle # 54MHz with simple read, no dummy cycles, and wait-for-write-completion diff --git a/tcl/interface/ftdi/miniwiggler.cfg b/tcl/interface/ftdi/miniwiggler.cfg index 6e53dae..ebaa979 100644 --- a/tcl/interface/ftdi/miniwiggler.cfg +++ b/tcl/interface/ftdi/miniwiggler.cfg @@ -25,10 +25,10 @@ # adapter driver ftdi -ftdi_device_desc "DAS JDS miniWiggler V3.1" -ftdi_vid_pid 0x058b 0x0043 +ftdi device_desc "DAS JDS miniWiggler V3.1" +ftdi vid_pid 0x058b 0x0043 -ftdi_channel 0 -ftdi_layout_init 0x0008 0x001b -ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100 -ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200 +ftdi channel 0 +ftdi layout_init 0x0008 0x001b +ftdi layout_signal nTRST -data 0x0100 -oe 0x0100 +ftdi layout_signal nSRST -data 0x0200 -oe 0x0200 diff --git a/tcl/interface/ftdi/neodb.cfg b/tcl/interface/ftdi/neodb.cfg index 1cfb352..426f5c4 100644 --- a/tcl/interface/ftdi/neodb.cfg +++ b/tcl/interface/ftdi/neodb.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "Debug Board for Neo1973" -ftdi_vid_pid 0x1457 0x5118 +ftdi device_desc "Debug Board for Neo1973" +ftdi vid_pid 0x1457 0x5118 -ftdi_layout_init 0x0508 0x0f1b -ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100 -ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400 -ftdi_layout_signal nNOR_WP -data 0x0010 -oe 0x0010 +ftdi layout_init 0x0508 0x0f1b +ftdi layout_signal nTRST -data 0x0200 -noe 0x0100 +ftdi layout_signal nSRST -data 0x0800 -noe 0x0400 +ftdi layout_signal nNOR_WP -data 0x0010 -oe 0x0010 diff --git a/tcl/interface/ftdi/ngxtech.cfg b/tcl/interface/ftdi/ngxtech.cfg index 3aa79ab..962f25b 100644 --- a/tcl/interface/ftdi/ngxtech.cfg +++ b/tcl/interface/ftdi/ngxtech.cfg @@ -11,9 +11,9 @@ echo "experience with this file to openocd-devel mailing list, so it could be ma echo "as working or fixed." adapter driver ftdi -ftdi_device_desc "NGX JTAG" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "NGX JTAG" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0508 0x0f1b -ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100 -ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400 +ftdi layout_init 0x0508 0x0f1b +ftdi layout_signal nTRST -data 0x0200 -noe 0x0100 +ftdi layout_signal nSRST -data 0x0800 -noe 0x0400 diff --git a/tcl/interface/ftdi/olimex-arm-jtag-swd.cfg b/tcl/interface/ftdi/olimex-arm-jtag-swd.cfg index 2153fd6..ace0df9 100644 --- a/tcl/interface/ftdi/olimex-arm-jtag-swd.cfg +++ b/tcl/interface/ftdi/olimex-arm-jtag-swd.cfg @@ -5,5 +5,5 @@ transport select swd -ftdi_layout_signal SWD_EN -nalias nTRST -ftdi_layout_signal SWDIO_OE -alias TMS +ftdi layout_signal SWD_EN -nalias nTRST +ftdi layout_signal SWDIO_OE -alias TMS diff --git a/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg b/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg index c8e3bef..ca014a4 100644 --- a/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg +++ b/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-OCD-H" -ftdi_vid_pid 0x15ba 0x002b +ftdi device_desc "Olimex OpenOCD JTAG ARM-USB-OCD-H" +ftdi vid_pid 0x15ba 0x002b -ftdi_layout_init 0x0908 0x0b1b -ftdi_layout_signal nSRST -oe 0x0200 -ftdi_layout_signal nTRST -data 0x0100 -ftdi_layout_signal LED -data 0x0800 +ftdi layout_init 0x0908 0x0b1b +ftdi layout_signal nSRST -oe 0x0200 +ftdi layout_signal nTRST -data 0x0100 +ftdi layout_signal LED -data 0x0800 diff --git a/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg b/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg index f9126d4..6b92575 100644 --- a/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg +++ b/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "Olimex OpenOCD JTAG" -ftdi_vid_pid 0x15ba 0x0003 +ftdi device_desc "Olimex OpenOCD JTAG" +ftdi vid_pid 0x15ba 0x0003 -ftdi_layout_init 0x0c08 0x0f1b -ftdi_layout_signal nSRST -oe 0x0200 -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal LED -data 0x0800 +ftdi layout_init 0x0c08 0x0f1b +ftdi layout_signal nSRST -oe 0x0200 +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal LED -data 0x0800 diff --git a/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg b/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg index eac25b6..98fe367 100644 --- a/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg +++ b/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H" -ftdi_vid_pid 0x15ba 0x002a +ftdi device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H" +ftdi vid_pid 0x15ba 0x002a -ftdi_layout_init 0x0808 0x0a1b -ftdi_layout_signal nSRST -oe 0x0200 -ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100 -ftdi_layout_signal LED -data 0x0800 +ftdi layout_init 0x0808 0x0a1b +ftdi layout_signal nSRST -oe 0x0200 +ftdi layout_signal nTRST -data 0x0100 -oe 0x0100 +ftdi layout_signal LED -data 0x0800 diff --git a/tcl/interface/ftdi/olimex-jtag-tiny.cfg b/tcl/interface/ftdi/olimex-jtag-tiny.cfg index 4811f4d..ebca496 100644 --- a/tcl/interface/ftdi/olimex-jtag-tiny.cfg +++ b/tcl/interface/ftdi/olimex-jtag-tiny.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "Olimex OpenOCD JTAG TINY" -ftdi_vid_pid 0x15ba 0x0004 +ftdi device_desc "Olimex OpenOCD JTAG TINY" +ftdi vid_pid 0x15ba 0x0004 -ftdi_layout_init 0x0808 0x0a1b -ftdi_layout_signal nSRST -oe 0x0200 -ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100 -ftdi_layout_signal LED -data 0x0800 +ftdi layout_init 0x0808 0x0a1b +ftdi layout_signal nSRST -oe 0x0200 +ftdi layout_signal nTRST -data 0x0100 -oe 0x0100 +ftdi layout_signal LED -data 0x0800 diff --git a/tcl/interface/ftdi/oocdlink.cfg b/tcl/interface/ftdi/oocdlink.cfg index deba4a5..367112a 100644 --- a/tcl/interface/ftdi/oocdlink.cfg +++ b/tcl/interface/ftdi/oocdlink.cfg @@ -11,9 +11,9 @@ echo "experience with this file to openocd-devel mailing list, so it could be ma echo "as working or fixed." adapter driver ftdi -ftdi_device_desc "OOCDLink" -ftdi_vid_pid 0x0403 0xbaf8 +ftdi device_desc "OOCDLink" +ftdi vid_pid 0x0403 0xbaf8 -ftdi_layout_init 0x0508 0x0f1b -ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100 -ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400 +ftdi layout_init 0x0508 0x0f1b +ftdi layout_signal nTRST -data 0x0200 -noe 0x0100 +ftdi layout_signal nSRST -data 0x0800 -noe 0x0400 diff --git a/tcl/interface/ftdi/opendous_ftdi.cfg b/tcl/interface/ftdi/opendous_ftdi.cfg index 50f32fb..f212bf5 100644 --- a/tcl/interface/ftdi/opendous_ftdi.cfg +++ b/tcl/interface/ftdi/opendous_ftdi.cfg @@ -8,10 +8,10 @@ # adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 -ftdi_channel 1 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 +ftdi channel 1 -ftdi_layout_init 0x0c08 0x0f1b -ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 -ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 +ftdi layout_init 0x0c08 0x0f1b +ftdi layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi layout_signal nSRST -data 0x0200 -noe 0x0800 diff --git a/tcl/interface/ftdi/openocd-usb-hs.cfg b/tcl/interface/ftdi/openocd-usb-hs.cfg index 6f67689..d1a3ff0 100644 --- a/tcl/interface/ftdi/openocd-usb-hs.cfg +++ b/tcl/interface/ftdi/openocd-usb-hs.cfg @@ -5,9 +5,9 @@ # adapter driver ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232-HS" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0508 0x0f1b -ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100 -ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400 +ftdi layout_init 0x0508 0x0f1b +ftdi layout_signal nTRST -data 0x0200 -noe 0x0100 +ftdi layout_signal nSRST -data 0x0800 -noe 0x0400 diff --git a/tcl/interface/ftdi/openocd-usb.cfg b/tcl/interface/ftdi/openocd-usb.cfg index ed80a05..620d204 100644 --- a/tcl/interface/ftdi/openocd-usb.cfg +++ b/tcl/interface/ftdi/openocd-usb.cfg @@ -5,9 +5,9 @@ # adapter driver ftdi -ftdi_device_desc "Dual RS232" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Dual RS232" +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0508 0x0f1b -ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100 -ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400 +ftdi layout_init 0x0508 0x0f1b +ftdi layout_signal nTRST -data 0x0200 -noe 0x0100 +ftdi layout_signal nSRST -data 0x0800 -noe 0x0400 diff --git a/tcl/interface/ftdi/openrd.cfg b/tcl/interface/ftdi/openrd.cfg index 535c5e8..88b2a6e 100644 --- a/tcl/interface/ftdi/openrd.cfg +++ b/tcl/interface/ftdi/openrd.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "OpenRD JTAGKey FT2232D B" -ftdi_vid_pid 0x0403 0x9e90 -ftdi_channel 0 +ftdi device_desc "OpenRD JTAGKey FT2232D B" +ftdi vid_pid 0x0403 0x9e90 +ftdi channel 0 -ftdi_layout_init 0x0608 0x0f1b -ftdi_layout_signal nTRST -data 0x0200 -ftdi_layout_signal nSRST -noe 0x0400 +ftdi layout_init 0x0608 0x0f1b +ftdi layout_signal nTRST -data 0x0200 +ftdi layout_signal nSRST -noe 0x0400 diff --git a/tcl/interface/ftdi/pipistrello.cfg b/tcl/interface/ftdi/pipistrello.cfg index 2074924..11fcf07 100644 --- a/tcl/interface/ftdi/pipistrello.cfg +++ b/tcl/interface/ftdi/pipistrello.cfg @@ -1,12 +1,12 @@ # http://pipistrello.saanlima.com/ # http://www.saanlima.com/download/pipistrello-v2.0/pipistrello_v2_schematic.pdf adapter driver ftdi -ftdi_device_desc "Pipistrello LX45" -ftdi_vid_pid 0x0403 0x6010 +ftdi device_desc "Pipistrello LX45" +ftdi vid_pid 0x0403 0x6010 # interface 1 is the uart -ftdi_channel 0 +ftdi channel 0 # just TCK TDI TDO TMS, no reset -ftdi_layout_init 0x0008 0x000b +ftdi layout_init 0x0008 0x000b reset_config none # this generally works fast: the fpga can handle 30MHz, the spi flash can handle # 54MHz with simple read, no dummy cycles, and wait-for-write-completion diff --git a/tcl/interface/ftdi/pls_spc5.cfg b/tcl/interface/ftdi/pls_spc5.cfg index 806f920..3b3c2d6 100644 --- a/tcl/interface/ftdi/pls_spc5.cfg +++ b/tcl/interface/ftdi/pls_spc5.cfg @@ -27,10 +27,10 @@ # adapter driver ftdi -ftdi_device_desc "PLS USB/JTAG Adapter for SPC5xxx" -ftdi_vid_pid 0x263d 0x4001 +ftdi device_desc "PLS USB/JTAG Adapter for SPC5xxx" +ftdi vid_pid 0x263d 0x4001 -ftdi_channel 0 -ftdi_layout_init 0x0008 0x000b -ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100 -ftdi_layout_signal nSRST -ndata 0x2000 -oe 0x2000 +ftdi channel 0 +ftdi layout_init 0x0008 0x000b +ftdi layout_signal nTRST -data 0x0100 -oe 0x0100 +ftdi layout_signal nSRST -ndata 0x2000 -oe 0x2000 diff --git a/tcl/interface/ftdi/redbee-econotag.cfg b/tcl/interface/ftdi/redbee-econotag.cfg index b6f6d23..35bedfa 100644 --- a/tcl/interface/ftdi/redbee-econotag.cfg +++ b/tcl/interface/ftdi/redbee-econotag.cfg @@ -14,8 +14,8 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_vid_pid 0x0403 0x6010 +ftdi vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0c08 0x0c2b -ftdi_layout_signal nTRST -data 0x0800 -ftdi_layout_signal nSRST -data 0x0400 +ftdi layout_init 0x0c08 0x0c2b +ftdi layout_signal nTRST -data 0x0800 +ftdi layout_signal nSRST -data 0x0400 diff --git a/tcl/interface/ftdi/redbee-usb.cfg b/tcl/interface/ftdi/redbee-usb.cfg index 52ab93e..a571766 100644 --- a/tcl/interface/ftdi/redbee-usb.cfg +++ b/tcl/interface/ftdi/redbee-usb.cfg @@ -14,9 +14,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_vid_pid 0x0403 0x6010 -ftdi_channel 1 +ftdi vid_pid 0x0403 0x6010 +ftdi channel 1 -ftdi_layout_init 0x0c08 0x0c2b -ftdi_layout_signal nTRST -data 0x0800 -ftdi_layout_signal nSRST -data 0x0400 +ftdi layout_init 0x0c08 0x0c2b +ftdi layout_signal nTRST -data 0x0800 +ftdi layout_signal nSRST -data 0x0400 diff --git a/tcl/interface/ftdi/rowley-cc-arm-swd.cfg b/tcl/interface/ftdi/rowley-cc-arm-swd.cfg index 9a96dbd..fb416db 100644 --- a/tcl/interface/ftdi/rowley-cc-arm-swd.cfg +++ b/tcl/interface/ftdi/rowley-cc-arm-swd.cfg @@ -6,5 +6,5 @@ transport select swd -ftdi_layout_signal SWD_EN -nalias nTRST -ftdi_layout_signal SWDIO_OE -alias TMS +ftdi layout_signal SWD_EN -nalias nTRST +ftdi layout_signal SWDIO_OE -alias TMS diff --git a/tcl/interface/ftdi/sheevaplug.cfg b/tcl/interface/ftdi/sheevaplug.cfg index d4ec72e..f1b6b89 100644 --- a/tcl/interface/ftdi/sheevaplug.cfg +++ b/tcl/interface/ftdi/sheevaplug.cfg @@ -5,10 +5,10 @@ # adapter driver ftdi -ftdi_device_desc "SheevaPlug JTAGKey FT2232D B" -ftdi_vid_pid 0x9e88 0x9e8f -ftdi_channel 0 +ftdi device_desc "SheevaPlug JTAGKey FT2232D B" +ftdi vid_pid 0x9e88 0x9e8f +ftdi channel 0 -ftdi_layout_init 0x0608 0x0f1b -ftdi_layout_signal nTRST -data 0x0200 -ftdi_layout_signal nSRST -noe 0x0400 +ftdi layout_init 0x0608 0x0f1b +ftdi layout_signal nTRST -data 0x0200 +ftdi layout_signal nSRST -noe 0x0400 diff --git a/tcl/interface/ftdi/signalyzer-lite.cfg b/tcl/interface/ftdi/signalyzer-lite.cfg index 4778420..9e010d3 100644 --- a/tcl/interface/ftdi/signalyzer-lite.cfg +++ b/tcl/interface/ftdi/signalyzer-lite.cfg @@ -10,9 +10,9 @@ echo "Please report your experience with this file to openocd-devel mailing list echo "so it could be marked as working or fixed." adapter driver ftdi -ftdi_device_desc "Signalyzer LITE" -ftdi_vid_pid 0x0403 0xbca1 +ftdi device_desc "Signalyzer LITE" +ftdi vid_pid 0x0403 0xbca1 -ftdi_layout_init 0x0008 0x000b -ftdi_layout_signal nTRST -data 0x0010 -oe 0... [truncated message content] |
