[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.11.0-83-geb6a5faf6

[OpenOCD-Gerrit <ope...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  eb6a5faf6ac8aa1791ada64e95768ff4ed29084c (commit)
      from  0f06d943366154963c6f5eb70f52e70f64fe5c71 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit eb6a5faf6ac8aa1791ada64e95768ff4ed29084c
Author: Yasushi SHOJI <ya...@sp...>
Date:   Tue Apr 6 18:51:57 2021 +0900

    doc: Group adapter sub-commands
    
    The commit 5280eb618a8cab46 fixed all `adapter_khz` and
    `adapter_nsrst_*` commands in the doc but missed grouping them.  This
    let the commands `adapter speed`, `adapter srst pulse_width`, and
    `adapter srst delay` not indexed.
    
    Tell texinfo about adapter sub-commands by grouping them in one.
    
    Change-Id: Ida53c4f5cfe28827320c145c8d501d53e831623c
    Signed-off-by: Yasushi SHOJI <ya...@sp...>
    Reviewed-on: http://openocd.zylin.com/6134
    Tested-by: jenkins
    Reviewed-by: Antonio Borneo <bor...@gm...>

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 6b74243b8..e39ff86f3 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -3415,7 +3415,7 @@ may not be the fastest solution.
 instead of @command{adapter speed}, but only for (ARM) cores and boards
 which support adaptive clocking.
 
-@deffn {Command} adapter speed max_speed_kHz
+@deffn Command {adapter speed} max_speed_kHz
 A non-zero speed is in KHZ. Hence: 3000 is 3mhz.
 JTAG interfaces usually support a limited number of
 speeds. The speed actually used won't be faster
@@ -3585,13 +3585,13 @@ needing to cope with both architecture and board specific constraints.
 
 @section Commands for Handling Resets
 
-@deffn {Command} adapter srst pulse_width milliseconds
+@deffn Command {adapter srst pulse_width} milliseconds
 Minimum amount of time (in milliseconds) OpenOCD should wait
 after asserting nSRST (active-low system reset) before
 allowing it to be deasserted.
 @end deffn
 
-@deffn {Command} adapter srst delay milliseconds
+@deffn Command {adapter srst delay} milliseconds
 How long (in milliseconds) OpenOCD should wait after deasserting
 nSRST (active-low system reset) before starting new JTAG operations.
 When a board has a reset button connected to SRST line it will

-----------------------------------------------------------------------

Summary of changes:
 doc/openocd.texi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository