Menu
▾
▴
[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.11.0-32-g06990a1a9
|
From: OpenOCD-Gerrit <ope...@us...> - 2021-03-10 21:38:09
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".
The branch, master has been updated
via 06990a1a9e9ace74fc6e79a78b5405bb63cee6b0 (commit)
via 77e1841f6420715953628c39ee6e4f515331e5ae (commit)
via f9b5e34e39fd7497fe9dfc965e2e3fa7e78616c1 (commit)
via a909df7088c32ef455ad3f78041ea17ffde41795 (commit)
from 210b7d2d1644c5c3dd1e59ffa684af56e3be498f (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 06990a1a9e9ace74fc6e79a78b5405bb63cee6b0
Author: Tarek BOCHKATI <tar...@gm...>
Date: Thu Feb 18 00:35:48 2021 +0100
tcl/target: add BCM2711 configuration file
The Broadcom BCM2711 used in Raspberry Pi 4
No documentation was found on Broadcom website
Partial information is available in raspberry pi website:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/
Change-Id: I3db6c9af520af8ab4c21ad35ff0f2db28efc0325
Signed-off-by: Tarek BOCHKATI <tar...@gm...>
Reviewed-on: http://openocd.zylin.com/6066
Tested-by: jenkins
Reviewed-by: Antonio Borneo <bor...@gm...>
diff --git a/tcl/target/bcm2711.cfg b/tcl/target/bcm2711.cfg
new file mode 100644
index 000000000..f8d2b3a65
--- /dev/null
+++ b/tcl/target/bcm2711.cfg
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# The Broadcom BCM2711 used in Raspberry Pi 4
+# No documentation was found on Broadcom website
+
+# Partial information is available in raspberry pi website:
+# https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME bcm2711
+}
+
+if { [info exists CHIPCORES] } {
+ set _cores $CHIPCORES
+} else {
+ set _cores 4
+}
+
+if { [info exists USE_SMP] } {
+ set _USE_SMP $USE_SMP
+} else {
+ set _USE_SMP 0
+}
+
+if { [info exists DAP_TAPID] } {
+ set _DAP_TAPID $DAP_TAPID
+} else {
+ set _DAP_TAPID 0x4ba00477
+}
+
+jtag newtap $_CHIPNAME cpu -expected-id $_DAP_TAPID -irlen 4
+adapter speed 4000
+
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+
+# MEM-AP for direct access
+target create $_CHIPNAME.ap mem_ap -dap $_CHIPNAME.dap -ap-num 0
+
+# these addresses are obtained from the ROM table via 'dap info 0' command
+set _DBGBASE {0x80410000 0x80510000 0x80610000 0x80710000}
+set _CTIBASE {0x80420000 0x80520000 0x80620000 0x80720000}
+
+set _smp_command "target smp"
+
+for { set _core 0 } { $_core < $_cores } { incr _core } {
+ set _CTINAME $_CHIPNAME.cti$_core
+ set _TARGETNAME $_CHIPNAME.cpu$_core
+
+ cti create $_CTINAME -dap $_CHIPNAME.dap -ap-num 0 -baseaddr [lindex $_CTIBASE $_core]
+ target create $_TARGETNAME aarch64 -dap $_CHIPNAME.dap -ap-num 0 -dbgbase [lindex $_DBGBASE $_core] -cti $_CTINAME
+
+ set _smp_command "$_smp_command $_TARGETNAME"
+}
+
+if {$_USE_SMP} {
+ eval $_smp_command
+}
+
+# default target is cpu0
+targets $_CHIPNAME.cpu0
commit 77e1841f6420715953628c39ee6e4f515331e5ae
Author: Tarek BOCHKATI <tar...@gm...>
Date: Sat Feb 20 23:40:56 2021 +0100
tcl/target: add BCM2837 configuration file
This is the Broadcom chip used in the Raspberry Pi 3,
and in later models of the Raspberry Pi 2.
Partial information is available in raspberry pi website:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837b0
Change-Id: I1188a7866304c59f670a543809aca3927174786e
Signed-off-by: Tarek BOCHKATI <tar...@gm...>
Reviewed-on: http://openocd.zylin.com/6069
Tested-by: jenkins
Reviewed-by: Antonio Borneo <bor...@gm...>
diff --git a/tcl/target/bcm2837.cfg b/tcl/target/bcm2837.cfg
new file mode 100644
index 000000000..749de3103
--- /dev/null
+++ b/tcl/target/bcm2837.cfg
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# This is the Broadcom chip used in the Raspberry Pi 3,
+# and in later models of the Raspberry Pi 2.
+
+# Partial information is available in raspberry pi website:
+# https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837
+# https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837b0
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME bcm2837
+}
+
+if { [info exists CHIPCORES] } {
+ set _cores $CHIPCORES
+} else {
+ set _cores 4
+}
+
+if { [info exists USE_SMP] } {
+ set _USE_SMP $USE_SMP
+} else {
+ set _USE_SMP 0
+}
+
+if { [info exists DAP_TAPID] } {
+ set _DAP_TAPID $DAP_TAPID
+} else {
+ set _DAP_TAPID 0x4ba00477
+}
+
+jtag newtap $_CHIPNAME cpu -expected-id $_DAP_TAPID -irlen 4
+adapter speed 4000
+
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+
+# MEM-AP for direct access
+target create $_CHIPNAME.ap mem_ap -dap $_CHIPNAME.dap -ap-num 0
+
+# these addresses are obtained from the ROM table via 'dap info 0' command
+set _DBGBASE {0x80010000 0x80012000 0x80014000 0x80016000}
+set _CTIBASE {0x80018000 0x80019000 0x8001a000 0x8001b000}
+
+set _smp_command "target smp"
+
+for { set _core 0 } { $_core < $_cores } { incr _core } {
+ set _CTINAME $_CHIPNAME.cti$_core
+ set _TARGETNAME $_CHIPNAME.cpu$_core
+
+ cti create $_CTINAME -dap $_CHIPNAME.dap -ap-num 0 -baseaddr [lindex $_CTIBASE $_core]
+ target create $_TARGETNAME aarch64 -dap $_CHIPNAME.dap -ap-num 0 -dbgbase [lindex $_DBGBASE $_core] -cti $_CTINAME
+ $_TARGETNAME configure -event reset-assert-post { aarch64 dbginit }
+
+ set _smp_command "$_smp_command $_TARGETNAME"
+}
+
+if {$_USE_SMP} {
+ eval $_smp_command
+}
+
+# default target is cpu0
+targets $_CHIPNAME.cpu0
commit f9b5e34e39fd7497fe9dfc965e2e3fa7e78616c1
Author: Tarek BOCHKATI <tar...@gm...>
Date: Sat Feb 20 23:21:53 2021 +0100
tcl/target: add BCM2836 configuration file
The Broadcom chip used in the Raspberry Pi 2 Model B
Partial information is available in raspberry pi website:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2836
Change-Id: I50b040db213c5b72f63d5f5534c552426c7376f9
Signed-off-by: Tarek BOCHKATI <tar...@gm...>
Reviewed-on: http://openocd.zylin.com/6068
Tested-by: jenkins
Reviewed-by: Antonio Borneo <bor...@gm...>
diff --git a/tcl/target/bcm2836.cfg b/tcl/target/bcm2836.cfg
new file mode 100644
index 000000000..04921315e
--- /dev/null
+++ b/tcl/target/bcm2836.cfg
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# The Broadcom chip used in the Raspberry Pi 2 Model B
+
+# Partial information is available in raspberry pi website:
+# https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2836
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME bcm2836
+}
+
+if { [info exists CHIPCORES] } {
+ set _cores $CHIPCORES
+} else {
+ set _cores 4
+}
+
+if { [info exists USE_SMP] } {
+ set _USE_SMP $USE_SMP
+} else {
+ set _USE_SMP 0
+}
+
+if { [info exists DAP_TAPID] } {
+ set _DAP_TAPID $DAP_TAPID
+} else {
+ set _DAP_TAPID 0x4ba00477
+}
+
+jtag newtap $_CHIPNAME cpu -expected-id $_DAP_TAPID -irlen 4
+adapter speed 4000
+
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+
+# MEM-AP for direct access
+target create $_CHIPNAME.ap mem_ap -dap $_CHIPNAME.dap -ap-num 0
+
+# these addresses are obtained from the ROM table via 'dap info 0' command
+set _DBGBASE {0x80010000 0x80012000 0x80014000 0x80016000}
+
+set _smp_command "target smp"
+
+for { set _core 0 } { $_core < $_cores } { incr _core } {
+ set _TARGETNAME $_CHIPNAME.cpu$_core
+
+ target create $_TARGETNAME cortex_a -dap $_CHIPNAME.dap -coreid $_core -dbgbase [lindex $_DBGBASE $_core]
+ $_TARGETNAME configure -event reset-assert-post { cortex_a dbginit }
+
+ set _smp_command "$_smp_command $_CHIPNAME.cpu$_core"
+}
+
+if {$_USE_SMP} {
+ eval $_smp_command
+}
+
+# default target is cpu0
+targets $_CHIPNAME.cpu0
commit a909df7088c32ef455ad3f78041ea17ffde41795
Author: Tarek BOCHKATI <tar...@gm...>
Date: Fri Feb 19 15:23:34 2021 +0100
tcl/target: add BCM2835 configuration file
This is the Broadcom chip used in the Raspberry Pi Model A, B, B+,
the Compute Module, and the Raspberry Pi Zero.
Partial information is available in raspberry pi website:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2835
Change-Id: Ifeb012952473d624327e8c010ac5c886d9473aa0
Signed-off-by: Tarek BOCHKATI <tar...@gm...>
Reviewed-on: http://openocd.zylin.com/6067
Tested-by: jenkins
Reviewed-by: Antonio Borneo <bor...@gm...>
diff --git a/tcl/target/bcm2835.cfg b/tcl/target/bcm2835.cfg
new file mode 100644
index 000000000..32a03666c
--- /dev/null
+++ b/tcl/target/bcm2835.cfg
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# This is the Broadcom chip used in the Raspberry Pi Model A, B, B+,
+# the Compute Module, and the Raspberry Pi Zero.
+
+# Partial information is available in raspberry pi website:
+# https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2835
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME bcm2835
+}
+
+if { [info exists DAP_TAPID] } {
+ set _DAP_TAPID $DAP_TAPID
+} else {
+ set _DAP_TAPID 0x07b7617F
+}
+
+jtag newtap $_CHIPNAME cpu -expected-id $_DAP_TAPID -irlen 5
+adapter speed 4000
+
+target create $_CHIPNAME.cpu0 arm11 -chain-position $_CHIPNAME.cpu
-----------------------------------------------------------------------
Summary of changes:
tcl/target/bcm2711.cfg | 62 ++++++++++++++++++++++++++++++++++++++++++++++++
tcl/target/bcm2835.cfg | 24 +++++++++++++++++++
tcl/target/bcm2836.cfg | 59 ++++++++++++++++++++++++++++++++++++++++++++++
tcl/target/bcm2837.cfg | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 209 insertions(+)
create mode 100644 tcl/target/bcm2711.cfg
create mode 100644 tcl/target/bcm2835.cfg
create mode 100644 tcl/target/bcm2836.cfg
create mode 100644 tcl/target/bcm2837.cfg
hooks/post-receive
--
Main OpenOCD repository
|
